Freescale Semiconductor FRDM-KL46Z User manual

TM
Quick Start Guide for FRDM-KL46Z Rev 1
www.freescale.com/FRDM-KL46Z

TM 2 Quick Start Guide for FRDM-KL46Z Rev 1
These documents are available as part of the Quick Start Package:
Name
Type
Description
Quick Start Guide
PDF
This document
OpenSDAApplications
Folder
OpenSDA Applications for the FRDM-KL46Z
Precompiled Examples
Folder
S-record images of example projects for use with the MSD Flash
Programmer
Additional reference documents are available on freescale.com/FRDM-KL46Z:
Name
Description
FRDM-KL46Z Quick Start
Package
Quick Start Guide and supporting files for getting started with the FRDM-
KL46Z.
FRDM-KL46Z User’s Manual
Overview and detailed information for the FRDM-KL46Z hardware.
FRDM-KL46Z Pinout
Spreadsheet of pin connections for all MCU pins. Includes pinout for the I/O
headers,Arduino R3 compatibility chart, and OpenSDAMCU pinout
FRDM-KL46Z Schematics
PDF schematics for the FRDM-KL46Z hardware
FRDM-KL46Z Design Package
Zip file containing all design source files for the FRDM-KL46Z hardware
OpenSDA User’s Guide
Overview and instructions for use of the OpenSDA embedded debug circuit.

TM 3 Quick Start Guide for FRDM-KL46Z Rev 1
SW1
Light
sensor
Red
LED
Green
LED
J1 I/O
Header
KL46Z256
J2 I/O
Header
KL46
USB OpenSDA USB
Reset
Accelerometer
MMA8451Q
Magnetometer
MAG3110
J3 I/O
Header
J4 I/O
Header
4-Digit
Segment LCD
SW3
Capacitive
Touch Slider
PTA1 - 2
PTA2 - 4
PTD3 - 6
PTA12 - 8
PTA4 - 10
PTA5 - 12
PTC8 - 14
PTC9 - 16
PTA13 - 2
PTD2 - 4
PTD4 - 6
PTD6 - 8
PTD7 - 10
PTD5 - 12
GND - 14
VREFH - 16
PTE0 - 18
PTE1 - 20
1 - PTB18
3 - PTB19
5 - PTC0
7 - PTC4
9 - PTC6
11 - PTC7
13 -PTC10
15 -PTC11
1 –PTC13
3 –PTC16
5 –PTA7
7 –PTA6
9 –PTA14
11 –PTA15
13 –PTA15
15 –PTA17
17 –PTB9
PTE30 - 11
PTB20 - 9
PTE23 - 7
PTE22 - 5
PTE21 - 3
PTE20 - 1
PTE2 - 15
PTE3 - 13
PTE6 - 11
PTE17 - 7
PTD7 - 10
PTE18 - 5
PTE19 - 3
PTE31 - 1
12 - PTC1
10 - PTC2
8 - PTB3
6 - PTB2
4 - PTB1
2 - PTB0
16 - P5-9V
14 - GND
12 - GND
10 - P5V-USB
8 –P3V3
6 –RST
4 - P3V3
2 –SDA_PTD5
19
PTE16 - 9

TM 4 Quick Start Guide for FRDM-KL46Z Rev 1
The Freescale Freedom development platform is a set of
software and hardware tools for evaluation and development.
It is ideal for rapid prototyping of microcontroller-based
applications. The Freescale Freedom KL46Z hardware,
FRDM-KL46Z, is a simple, yet sophisticated design featuring a
Kinetis L Series microcontroller, the industry’s first
microcontroller built on the ARM® Cortex™-M0+ core.
Features:
•MKL46Z256VLL4MCU –48MHz, 256KB Flash, 32KB
SRAM, segment LCD, USB OTG (FS) , 100 LQFP
•Capacitive touch slider, MMA8451Q accelerometer,
MAG3110 magnetometer.
•Flexible power supply options –USB, coin cell battery,
external source
•Easy access to MCU I/O
•Battery-ready, power-measurement access points
•Form factor compatible with Arduino ™ R3 pin layout
•OpenSDA debug interface
•Mass storage device flash programming interface (default) –
no tool installation required to evaluate demo apps
•P&E Debug interface provides run-control debugging and
compatibility with IDE tools
•CMSIS-DAP interface: new ARM standard for embedded
debug interface Refer to the FRDM-KL46Z User’s Manual and
OpenSDA User’s Guide for more information.

TM 5 Quick Start Guide for FRDM-KL46Z Rev 1
Installing Drivers and Running the Out of Box Demo
FRDM-KL46Z comes with the mass-storage device
(MSD) Flash Programmer OpenSDAApplication
preinstalled. It will appear as a removable storage
drive with a volume label of FRDM-KL46Z
The MSD Flash Programmer also includes a USB
virtual serial port which requires an .INF file for proper
installation in Windows. The necessary .INF file is
available in the P&E OpenSDAUSB Drivers (Step 0)
and also on the FRDM-KL46Z removable drive.
If the USB CDC Serial Port fails to automatically install
in Windows, follow the instructions in Step 2.
Otherwise, skip to Step 3.
Optional: Download and Install the P&E OpenSDA
USB Drivers found at www.pemicro.com/opensda.
Plug in a USB cable (not included) from a USB host to
the OpenSDA mini-B USB connector. The FRDM-
KL46Z will be powered by this USB connection.
a. Open Device Manager
b. Locate and right-click on “OpenSDA –
CDC Serial Port”
c. Select “Update Driver Software”
d. ”Browse” and select the FRDM-KL46Z
drive
e. Click “Next” to complete the
installation
The pre-installed demo running on the
KL46 MCU shows different features of
the board including segment LCD, an
implementation of e-compass function
based on board accelerometer and
magnetometer as indicated on following
page.
0
1
2
3

TM 6 Quick Start Guide for FRDM-KL46Z Rev 1
Running the Out of Box Demo
4 7
5
6
Segment LCD self-
test
All segments are
turned on for 3
seconds.
Up counting.
All digits increase by
one periodically.
Press SW1 to change
to slider mode
Slider
Touch electrodes,
relative position is
displayed.
Press SW1 to change to
eCompass mode
eCompass
Calibration
Rotate FRDM-KL46Z, direction
in degrees is shown on
segment LCD screen. Leds will
blink faster when pointing to
the North.
Press SW1 to change to
Up-counting mode.
Move FRDM-KL46Z in
all directions until
count reach 100.
Running

TM 7 Quick Start Guide for FRDM-KL46Z Rev 1
The MSD Flash Programmer is a composite USB application that provides a virtual serial port and an easy and
convenient way to program applications into the KL46Z MCU. It emulates a FAT16 file system, appearing as a
removable drive in the host file system with a volume label of FRDM-KL46Z. Raw binary and Motorola S-record files
that are copied to the drive are programmed directly into the flash of the KL46 and executed automatically. The
virtual serial port can be opened with standard serial terminal applications.
Using the MSD Flash Programmer
Using the Virtual Serial Port
Open the serial terminal emulation program of
your choice. Examples for Windows include Tera
Term, PuTTY, and HyperTerminal.
Program one of the “serial test” applications from
the Precompiled Examples folder using the MSD
Flash Programmer.
Configure the terminal program. Most embedded
examples use Baudrate115200, 8 data bits, no
parity bits, and one stop bit (8-N-1).
Press and release the Reset button (SW1) at
anytime to restart the example application.
Resetting the embedded application will not affect
the connection of the virtual serial port to the
terminal program.
NOTE: Refer to the OpenSDA User’s Guide for a
description of a known Windows issue when
disconnecting a virtual serial port while the COM
port is in use.
1
2
The new application should now be running on the
FRDM-KL46Z drive.
Program FRDMKL46_Demo_freedom.srec
example to replace the out-of-box demo on your
FRDM-KL46Z drive.
Determine the symbolic name assigned to the
FRDM-KL46Z virtual serial port. In Windows
open Device Manager and look for the COM port
named “PEMicro/Freescale –CDC Serial Port”.
1
2
3
4
5

TM 8 Quick Start Guide for FRDM-KL46Z Rev 1
OpenSDA is an open-standard serial and debug adapter. It bridges serial and debug communications between a
USB host and an embedded target processor. OpenSDA software includes a flash-resident USB mass-storage
device (MSD) bootloader and a collection of OpenSDAApplications. FRDM-KL46Z comes with the MSD Flash
Programmer OpenSDA Application preinstalled. Follow these instructions to run the OpenSDABootloader and
change the installed OpenSDAApplication to P&E Debug Application that provides debugging and a virtual serial
port all in one application.
Enter OpenSDA Bootloader Mode
Locate the OpenSDA Applications folder in the FRDM-
KL46Z Quick Start Package.
Copy & paste or drag & drop the Debug Application
(DEBUG-APP_Pemicro_v106.SDA) to the
BOOTLOADER drive.
Unplug the USB cable and plug it in again. The new
OpenSDA Application should now be running and now
you can debug your application. For more details on
Debug mode or Mass storage application refer to the
OpenSDA user’s guide “OPENSDAUG.pdf”
A removable drive should now be visible in the host file
system with a volume label of BOOTLOADER. You are
now in OpenSDABootloader mode.
1
2
3
4
1
2
3
Use this same procedure to load other OpenSDA
Applications

TM 9 Quick Start Guide for FRDM-KL46Z Rev 1
Now that you are familiar with the FRDM-KL46Z
and OpenSDA, it’s time to explore the additional
software and lab guides available on
www.freescale.com/FRDM-KL46Z. Select your
next path from the links in the Jump Start Your
Design section.

TM 10 Quick Start Guide for FRDM-KL46Z Rev 1
All rights reserved. Information in this document is provided solely to enable system and software
implementers to use Freescale products. There are no express or implied copyright licenses granted
hereunder to design or fabricate any integrated circuits or integrated circuits based on the information
in this document.
Freescale reserves the right to make changes without further notice to any products herein. Freescale
makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does Freescale assume any liability arising out of the application or use of any
product or circuit, and specifically disclaims any and all liability, including without limitation
consequential or incidental damages. “Typical” parameters that may be provided in Freescale data
sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals”, must be validated for each customer
application by customer’s technical experts. Freescale does not convey any license under its patent
rights nor the rights of others. Freescale sells products pursuant to standard terms and conditions of
sale, which can be found at the following address:
http://www.reg.net/v2/webservices/Freescale/Docs/TermsandConditions.htm
Freescale, the Freescale logo, Altivec, C-5, CodeTest, CodeWarrior, ColdFire, C_Ware, Energy
Efficient Solutions logo, Kinetis, mobileGT, PowerQUICC, Processor Expert, QorIQ, Qorriva,
StarCore, Symphony, and VortiQa are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. &
Tm. Off. Airfast, BeeKit, BeeStack, ColdFire+, CoreNet, Flexis, MadniV, MXC, Platform in a Package,
QorIQ Qonverge, QUICC Engine, Ready Play, SafeAssure, SMARTMOS, TurboLink, Vybrid, and
Xtrinsic are trademarks of Freescale Semiconductor, Inc. All other product or service names are the
property of their respective owners.
© Freescale Semiconductor, Inc. 2013.
All rights reserved.