Freescale Semiconductor MSC8156 User manual

Verify Kit Contents
Verify that all kit contents are included.
a.) MSC8156EVM with attached plastic spacers and screws
b.) One CD with documentation files.
c.) AC/DC 12V/3.0A wall plug and adapters.
d.) Ethernet cable (1)
e.) USB cable Type A to Type B (1) USB
f.) ENEA software and documentation thumb drive
Default Settings
The board is shipped with default settings. For questions
about the settings, access the Hardware Getting Started
Guide on the enclosed CD. Verify the default settings for Switches
using Section 5 and Jumpers using Section 7.
Assemble the Power Supply
For standalone mode, assemble and connect the
12-V power supply using the following steps:
a.) Make sure that all power is turned off.
b.) Assemble the AC/DC power supply kit, as follows:
  •Attachthepowercablewiththecountryspecificwall
output plug for your area.
  • Attachthecablewiththeplugforthe
board connection.
c) Connect the AC/DC power supply cable to the 12 V (P2)
board jack.
d) Plug the power cable into the wall outlet.
e) Insert one end of the USB cable into J2, the board USB
socket. Insert the other cable end into the USB port on a PC.
Note: In PCI Express
®
mode, power comes from the
connecting PCI Express board.
Power Up and Power Off
Perform the initial power up and check using the
following steps:
a.) Move the power switch (S1) to the ON position. After
the PORESET sequence completes; LDs 1 and 3 should
display a constant green light.
b.) Power the system off by moving the power switch (S1)
to the PCIe 12V position.
Turn to the following page for software loading
instructions.
Note: The instructions describe a basic inventory of the
EVM contents and mechanical setup for a standalone
system. Refer to the Hardware Getting Started Guide
and MSC8156EVM Reference Manual for other
configuration details.
STEP
1
STEP
2
STEP
3
STEP
4
STEP
5
MSC8156 Evaluation Module (MSC8156EVM) Quick Setup Guide
a
c
d e f
LD1
LD3
( On)
S1
P2: 12V
S1
J2
b

Load the Software
The MSC8156EVM is supported by an evaluation
version of the CodeWarrior for StarCore DSPs software. To obtain
your 60-trial version, connect your PC to the internet. Because of
large file sizes, a high-speed interface is preferred.
a. Go to www.freescale.com.
b. On the home page, click on
c. On the next screen, click on
d. On the download page, click on
e. On the Evaluation Software page, click on
f. Follow the on-screen instructions to complete the download.
For detailed instructions on how to complete the installation
and extend your license agreement, see the MSC8156EVM
Software Installation Guide on your documentation CD.
ENEA USB Memory Stick.
A complementary evaluation version of ENEA’s OSEck
real time operating system with installation guide and
running instructions. Please consult the supporting
documentation contained on the USB Memory Stick
for further information.
Documentation CD.
Copies of supporting documentation and software,
including copies of the Hardware Getting Started
Guide, the MSC8156 Evaluation Module (MSC8156EVM)
Reference Manual, and other product documentation. For a
complete list of current documentation for the products in the
MSC8156 family supported by this board, refer to freescale.com.
Quick Start Guide for MSC8156EVM
STEP
6
Freescale, the Freescale logo and CodeWarrior are trademarks or registered trademarks of Freescale Semiconductor, Inc. Reg. U.S. Pat. & Tm. Off.
All other product or service names are the property of their respective owners. © 2010 Freescale Semiconductor, Inc.
Doc Number: MSC8156EVMQSG / REV 0
Agile Number: 926-78506 / REV A
Learn more at freescale.com/starcore.
!
!
How to Reach Us:
Home Page:
freescale.com
Web Support:
freescale.com/support
USA/Europe or Locations Not Listed:
Freescale Semiconductor, Inc.
Technical Information Center, EL516
2100 East Elliot Road
Tempe, Arizona 85284
[phone] or
[phone]
freescale.com/support
Europe, Middle East, and Africa:
Freescale Halbleiter Deutschland GmbH
Technical Information Center
Schatzbogen 7
81829 Muenchen, Germany
[phone] (English)
[phone] (English)
[phone] (German)
[phone] (French)
freescale.com/support
Japan:
Freescale Semiconductor Japan Ltd.
Headquarters
ARCO Tower 15F
1-8-1, Shimo-Meguro, Meguro-ku
Tokyo 153-0064
Japan
0120 191014 or
[phone]
[email protected]
Asia/Pacific:
Freescale Semiconductor China Ltd.
Exchange Building 23F
No. 118 Jianguo Road
Chaoyang District
Beijing 100022
China
[phone]
[email protected]
For Literature Requests Only:
Freescale Semiconductor
Literature Distribution Center
[phone] or
[phone]
Fax: [phone]
[e-mail]