Freewing AT-6 Texan User manual

MADE IN CHINA
Version No.: F3401-V01
Item No.: F3401(Yellow)
The manual suit for every color scheme of Freewing AT-6 Texan.
The manual only choose one color scheme as an example.
WINGSPAN : 1450mm (57-1/16")
The manual is only for reference. All is according to the actual product .We can't note if any
improvement or upgrade.
Item No.: F3402(Gray)
Spareparts support please visit to search.,www.sz-freewing.com
Instruction Manual


Catalogue





3
5
12
11
Product Introduction
Assemble Instruction
Center of Gravity
Assemble Structure
Motor Specification
13
1
5
12
11
13

YES
YES
YES
EPO
40A ESC
4S 14.8V 2200mAh 20C
2-Bladed 14*7
3648-650KV
1450mm (57-1/16")
970mm (38-1/8")
1950g (68.78 oz.)
2550g (89.94 oz.)
Item No.: F3401(Yellow) ; F3402(Gray)
: -1-
The following is our basic specification.
Specification
Material
Fuselage length
Wingspan
Flight weight
Pull
Motor size
Prop size
Battery
ESC
Servo
Landing gear
Aileron
Elevator
Rudder
Throttle
9g servo (4pcs)
According to different demands, we provide RTF, ARF(no transmitter, receiver ,battery and
charger),Airframe only, the three equipment for your choose. Please refer to the following
list to take an inventory and make sure it is complete.
Note:1.Picture use ARF version for your reference.
2. refer to RTF version refer to ARF version refer to Airframe version
EPO Foam Fuselage
Motor
ESC
Servo
Battery
Charger
Manual
Spare Parts Bag
:
Version No.: F3401-V01
F3401-V01
F3401( ) ; F3402( ) 
Thanks very much for your purchasing our Freewing “AT-6 Texan”, it use the EPO material
and add parts of carbon material to ensure its strength structure.We have spent a lot of
energy, under the premise of make sure the flight performance, we try the best to do it close
to the real plane. We hope that you have many pleasant flight with your AT-6 Texan.
Its structural design is very reasonable, you can finish its install very quickly. Install main
wing and tail wing is extremely simple.Only take several minutes,you can complete its
assemble. Please read the assembly manual carefully to familiarize you with all the steps
before starting.
Flap
YES
YES(Do it by yourself)
17g servo (1pcs)
Metal Scale Electric Retract
AT-6 Texan

5
6
1
2
3
4
PM4*50mm
PM4*35mm 2
(RTF\ARF)
1
/
2
1.2mm
20*60mm
1
1
1
/
/
7
8
9
Accessory Bag Content List
Spare Parts Bag
No. Name Specification Qty.
()Airframe Only
Spare Parts Bag 1
Spare Parts Bag 2
1.This is not a toy .It is for experienced modelers only. You are responsible for the safeoperation
of this model and any damage of harm it may cause.
2.Before flying the AT-6 Texan for the first time .Please read through the instructions
carefully and make sure that your radio equipment is working properly and has been range
tested prior to flight.
3.Young people under the age of 14 should only be permitted to operate this model under the
instruction and supervision of and adult with modeling experience.
4.Please keep these instructions for future reference after completing model assembly.They
contain information critical to the safe operation of this model.
5.If you have any further questions regarding the safe operation of you RC model.pleasecontact
your local hobby shop .flying club or Freewing Model for professional help and advice.
Note:
10
11
12
PA3*42mm
PA3*35mm
PT1.7*20mm
2
1
1
2
L=100mm 2
/1
5
6
1
2
3
4
PM4*50mm
PM4*35mm 2
1
/
2
1.2mm
Tail Wing fixing
plastic part
20*60mm
1
1
1
/
/
7
8
9
No. Name Specification Qty.
Screw
Screw
Screw Driver
Velcro
Clips
10
11
12
Screw
Screw
Screw
PA3*42mm
PA3*35mm
PT1.7*20mm
2
1
1
2
YWire
L=100mm 3
Main Wing fixing
plastic part
Air Inlet /1
PA3*10mm 4
L=41.5mm 2
13
14
11
No. Name Specification Qty.
Propeller 2-Bladed 14*7
Item No.: F3401(Yellow) ; F3402(Gray)
: -2- :
Version No.: F3401-V01
F3401-V01
F3401( ) ; F3402( ) 
AT-6 Texan
Tail Wing fixing
plastic part
Screw
Screw
Screw Driver
Velcro
Clips
Screw
Screw
Screw
YWire
Main Wing fixing
plastic part
Air Inlet
Screw
Metal Wire

  ，,
.，,
。“”，！
EPO" "，AT-6 Texan
、。、。
，。，、
。
:
，、 、、、)、
。。
ARF(















EPO







  
2.
：1.   .ARF

ARF

YES
YES
YES
EPO
40A ESC
4S 14.8V 2200mAh 20C
2-Bladed 14*7
3648-650KV
1450mm (57-1/16")
970mm (38-1/8")
1950g (68.78 oz.)
2550g (89.94 oz.)
9g servo (4pcs)
YES
YES()、
17g servo (1pcs)
Metal Scale Electric Retract

Item No.: F3401(Yellow) ; F3402(Gray)
: -3- :
Version No.: F3401-V01
F3401-V01
F3401( ) ; F3402( ) 
AT-6 Texan



(、 )ARF
 1
()
 2
5
6
1
2
3
4
PM4*50mm
PM4*35mm 2
1
/
2
1.2mm
20*60mm
1
1
1
/
/
7
8
9
10
11
12
PA3*42mm
PA3*35mm
PT1.7*20mm
2
1
1
2
L=100mm 2
/1
5
6
1
2
3
4
PM4*50mm
PM4*35mm 2
1
/
2
1.2mm
20*60mm
1
1
1
/
/
7
8
9
10
11
12
PA3*42mm
PA3*35mm
PT1.7*20mm
2
1
1
2
L=100mm 3
/1
PA3*10mm 4
L=41.5mm 2
13
14
11
 2 14*7





Y








   
 





Y






Item No.: F3401(Yellow) ; F3402(Gray)
: -4- :
Version No.: F3401-V01
F3401-V01
F3401( ) ; F3402( ) 
AT-6 Texan


：
，，，，
 。
1．
[email protected]
Install
1.When install, please read the manual carefully. if you have any questions, kindly contact with your distributor,
or contact us on [email protected]
Note:
2. ,!",#$%12 。
2.Before install, please refer to P12 ,check the screw position.
3.Spareparts support please visit to search.
,www.sz-freewing.com
-&',().
-*+,-./.
-+,01/-012。
-3" 45&6、
。
Y”
-785、&。
-Use one Y-wire to connect left/right main
wing servo wire. Use another Y-wire to
connect left/right main landing gear wire.
-Prepare to install main wing as the right
photo shown.
-Insert the stainless tube into one wing.
-Insert the another side of stainless tube into
another wing.
3. 9:，;<=> .- . #?.www sz freewing com
-Press on the left & right main wing.
Item No.: F3401(Yellow) ; F3402(Gray)
: -5- :
Version No.: F3401-V01
F3401-V01
F3401( ) ; F3402( ) 
AT-6 Texan

-@ABCDE。
-*FA。
-GH、4IJI，K
4L。
-&'，M。
-:MNO。PQJ
L。
-As the right photo shown, put down the main
landing gear.
-Remove the canopy from fuselage.
-Press the fuselage on the main wing.
-Switch on the transmitter, connect throttle
channel and landing gear channel and power
on.
-Keep the “put down landing” condition and
power off.
Item No.: F3401(Yellow) ; F3402(Gray)
: -6- :
Version No.: F3401-V01
F3401-V01
F3401( ) ; F3402( ) 
AT-6 Texan

-RS，FT。
-*A。
-&'UV，WXYZ[\。
-]AI。
-&'。()^_，()。
-As the right photo shown, prepare to install
tail wing set.
-Turn over the fuslage, press on the main wing
fixing plastic parts.
-Fixed the main wing on the fuselage by
screws.
-Glue on the inlet decorate plastic parts.
-Apply the glue to the indicated position.
Item No.: F3401(Yellow) ; F3402(Gray)
: -7- :
Version No.: F3401-V01
F3401-V01
F3401( ) ; F3402( ) 
AT-6 Texan

-.
-。
-&'。`a。
-RS，F`。
-bT`.
-Screw tightly to fix rudder.
-Install elevator
-Fixed the elevator by screws.
-As the right photo shown, install rudder.
-Turn over fuselage, press on the rudder
fixing plastic parts.
Item No.: F3401(Yellow) ; F3402(Gray)
: -8- :
Version No.: F3401-V01
F3401-V01
F3401( ) ; F3402( ) 
AT-6 Texan