Freewing F-16 FIGHTING FALCON V3 User manual

MADE IN CHINA
R
www.sz-freewing.com
Wingspan:878mm
USER�MANUAL
F-16 FIGHTING FALCON V3
Iten No.: FJ211
Version No.: FJ211-V02

Introduction
1R
Catalog
The F-16C "Fighting Falcon" is a single-engine multirole fighter aircraft originally developed
for the United States Air Force (USAF). Designed as an air superiority day fighter, it evolved into
a successful all-weather multirole aircraft. The F-16C features an internal M61 Vulcan cannon
and multiple locations for mounting weapons and other mission equipment. Operating in nearly
30 countries to this day, the F-16 has distinguished its place in aviation history.
Freewing has modeled this brilliant aircraft in EPO foam with a 70mm electric ducted fan
(EDF) powerplant. With a 1306mm length and 878mm wingspan, this 1/12 scale flying replica
includes many exciting features! An accurate scale outline with sharp surface details and panel
lines make this model stand out at your airfield. Removable main wings and a magnetic nose
cone make transport very convenient. The cockpit battery bay cover is secured with a sliding
latch to prevent separation during flight, and the entire aircraft is reinforced with strategic
placement of carbon tubes to withstand vigorous flying maneuvers.
Our Freewing 70mm F-16C V2 model jet uses electric retractable landing gear for lower drag
and better scale appearance during flight. These powerplants achieve a maximum flying speed
of 165kph, respectively. The aircraft is designed for stability, strong climbing performance, and
short takeoff distance, suitable for all levels of jet pilots. The aircraft can also maintain a high
alpha of 30 degrees to demonstrate its superior low speed stability.
We feature this exciting aircraft in the modern three tone gray US Air Force base colors, and
three decal sets are included for you to choose from to customize your model from various actual
Air Force squadrons.
Introduction
Product basic parameters
Packing list
PNP Installation Instruction
Landing gear Installation Instructions
Control board Instruction
1
2
2
5
6
8
Motor parameters
Battery Installation
Center of Gravity
Control surface diagram
Important�additional�notes
Dual rates
8
9
9
10
10
11
EN
F-16 Fighting Falcon
Iten No.: FJ211
Version No.: FJ211-V02
www.freewing-model.com

Product basic parameters
2
R
Packing list
EN
1306mm(51.4in.)
878mm(34.57in.)
The package don't include the missles and pylons, if you need, please contact your
local dealer.
Wing loading：2
145g/dm
Motor: 2957-2210KV I/RMotor
Ducted fan: 70mm 12-blade ducted fan
Flight speed: 165km/h
ESC:80A brushless ESC
Servo: 9g Hybrid digtal servo(6pcs)
Weight: 1550g (without battery)
Thrust: 2400g
Battery advise: 6S 3 5 0 0 -4 5 0 0 m A h
Standard version
专业版
NO. PNP KIT Plus Airframe
1
2
3
4
5
Fuselage
Main wing
Vertical tail
Horizontal tail
Nose cone、FIn
Missiles and pylons
Pushrod
Carbon tube
Glue/Decals
Manual
Parts Name
6
7
8
9
10
Airframe
KIT Plus
PNP
Parts Name
NO.
Pre-installed all
electronic parts Pre-installed
servo No electronic
equipment
Pre-installed
servo No electronic
equipment
Pre-install power
system and servos Optional part,
purchase seperately Optional part, purchase seperately Optional part, purchase seperately
F-16 Fighting Falcon
Iten No.: FJ211
Version No.: FJ211-V02
Pre-installed all
electronic parts Pre-installed
servo No electronic
equipment
www.freewing-model.com

3R
PNP Installation Instruction
1.Insert the carbon tube into fuselage.
Carbon tube（Ø6x500mm）
2 .Connect the main wing servo cable and fuselage
extension cable, then install left/right main wing.
main wing trough port
EN
Install main wing
平 尾 组 装
Install Fuselage
Screw（KA3x10 4pcs）
3 .Use 4pcs screws to fix the main wing.
F-16 Fighting Falcon
Iten No.: FJ211
Version No.: FJ211-V02
1.Use glue to attach the left/right tail fuselage pieces
onto the fuselage.
www.freewing-model.com

4
R
PNP Installation Instruction EN
平尾组装
Install Honrizotal Stabilizer
F-16 Fighting Falcon
Iten No.: FJ211
Version No.: FJ211-V02
平尾组装
Install Vertical Stabilizer
Screw （H M 2 x4 m m 1 p cs)
1.Connect the rudder servo wire and fuselage extension wire.
2.Install the vertical tail on the fuselage and fix it with screws
S cre w （K A 3 x1 0 m m 4 p cs)
Screw (K A 3x10mm 4pcs)
1.Insert the rotating shaft into the fixing hole and
tighten it with screws.
2.Insert the rotating shaft into the horizontal tail,
and fix it with a fixing ring.
3.Follow the above steps to install the other side
horizontal tail.
ste p 1
1 First, lock the screw into the fixing ring to half the depth..
.2 Place the fixing ring into the horizontal tail groove.
.In se rt th e ro ta tin g sh aft in to th e ho rizo n ta l tail,3
ad ju st th e po sitio n of th e fixin g rin g , an d fin ally
tighten the screw.
4.Follow the above steps to install the other side
horizontal tail.
www.freewing-model.com

78mm
5R
55mm
53mm
Servos install introduction EN
Aileron pushrod size Aileron pushrod mounting hole
Rudder pushrod size Rudder pushrod mounting hole
Elevator pushrod size Elevator pushrod mounting hole
Pushrod diameter Ø1.2mm
Pushrod diameter Ø1.5mm
Pushrod diameter Ø1.2mm
F-16 Fighting Falcon
Iten No.: FJ211
Version No.: FJ211-V02
Install missiles and pylons
Step 1
(Note:�The package don't include the missles and pylons, if you need, please contact your local dealer.)
AIM-120 Pylon Step 2
Step 3
AIM-120 Missile
AIM-9 Missile
1
2
3
4
2
3
2
3
1
2
3
1
2
3
4
1
2
3
4
www.freewing-model.com

P
O
N
Q
R
S
6
R
( 2-9/16")
65mm
Please refer to the following photo，assemble、replace、revise the nose landing gear
sparepart name and parameters
A
B
C
D
T
A- Jimi screws (M3x3 1pcs)
B- Wheel chock
C- Wheel
D- Nose gear main strut
E- L-Shape arm
F- Jimi screw (M3x3)
G- Nose gear steering ring
H- Nose gear steering rod
I - Metal shaft
J - Buckle (Ø2.0mm 1pcs)
K- Nose gear plastic cover(left)
L - Nose gear plastic cover(right)
M- Screw (PA1.7x8 2pcs)
M1- Screw (PB1.0x10 3pcs)
Step 1
E
F
G
H
I
J
K
L
Landing gear Installation Instructions EN
Install nose landing gear
N- Screw
O- Nose gear screw fixed part
P- Nose gear installed set
Q- Servo
ScrewR- (PWA2.0x8 2pcs)
S- Steering pushrod
T- Nose cabin door
Step 2Step 3
Step 5Step 6
When installing,please check the flat position of spareparts,when screw to fix,the flat position must face to theNote ,
screw hole,just like this,it can fix successfully, the spareparts don t rotate and fall off.
(KA2.6x12 4pcs)
Step 4
M
M1
F-16 Fighting Falcon
Iten No.: FJ211
Version No.: FJ211-V02

1
2
3
4
5
A -
B-
C-
D-
E-
F-
Jimi screw (M3x3 1pcs)
Wheel chock
Wheel
Rear gear main strut
Electric retractable controller
Jimi screw (M3x3 2pcs)
A
B
C
DE
F
G
H
I
J
G-
H-
I-
J-
Rear gear installed set
Rear gear screw fixed part
Screw (KA2.6x12 8pcs)
Rear cabin door
6
Landing gear Installation Instructions EN
Install rear landing gear
Please assemble、�disassemble the rear landing gear
according to the following photo.
If you need to purchase other brand servo, please
refer to the following list to choose correct size servo.
1
2
3
4
5
6
Servo regulation
No.
Standard/Reverse
Nose steering
Left aileron
Right aileron
Left elevator
Right aileron
Rudder
Servo position Servo cable length
9g Digit-Hybrid
9g Digit-Hybrid
9g Digit-Hybrid
9g Digit-Hybrid
9g Digit-Hybrid
9g Digit-Hybrid
Standard
Standard
Standard
Standard
Reverse
Standard
100mm
200mm
200mm
900mm
900mm
200mm
Servo parameters
Step 1Step 2
Step 3
Step 4
7RF-16 Fighting Falcon
Iten No.: FJ211
Version No.: FJ211-V02
www.freewing-model.com

Control board instruction EN
Motor parameters
8
R
F-16 Fighting Falcon
Iten No.: FJ211
Version No.: FJ211-V02
Landing Gear
Flap
Landing gear
Rudder
Elevator
Aileron
(power to the receiver)
Landing Gear
Rudder/Nose steering
Elevator
Aileron
Flap
Rudder/Nose steering
Elevator
Aileron
Flap
According to the note, connect the
related servo cables in the control
board.
The control surface is not any note on
the control board, connect directly to
the receiver.
29571
www.freewing-model.com

Installed the battery and use velcro to fix.
battery compartment cover
battery
Velcro
battery tray
I n s t a l l b a t t e r y EN
Pull the sticker back
and open the cockpit.
4S 14.8V 2600~4000mAh
6S 22.2V 2600~4000mAh
discharge rate 30C >
The battery capacity and discharge rate
we advise to use are as follows:
Center of Gravity
Correct center of gravity is directly related to the success of the flight, please refer to the following CG diagram to
adjust your plane's center of gravity.
- You can move the battery forward or backward
to adjust the center of gravity.
- If you can not adjust the CG through move the
battery, you can also use some other suitable
material weight to counterweight, to make sure
that CG is in the correct position.
Before connect the battery and receiver, please
switch on the transmitter power and make sure the
throttle stick is in the lowest position.
Battery cabin space size:L=260 W=70 H=45(mm)
9RF-16 Fighting Falcon
Iten No.: FJ211
Version No.: FJ211-V02
Full-elevator horizontal tail install position
90mm
(3-1/2")
Please refer to the photo and set the correct full elevator
center position
18.5mm