FRENCH FITNESS FF-CT80 User manual

1
FF-CT80
FRENCH FITNESS CT80 MANUAL CURVE
TREADMILL W/RESISTANCE
ASSEMBLY MANUAL

2
Transport Wheels in front & Handles in
rear for easy transportation
Non- motorized Zero- energy
consumption
Pure green energy treadmill
Creative crawler belt without running
board design ensures that the running
belt has no sideways deviation and
waxing.
Fully shock- absorbing, safe and
comfortable
Creative precision bearing transmission
system, smooth, zero drag and stick
Lower noise, power consumption, failure
rate and maintenance cost
Eliminates the slippage of traditional
running belts
Accurate speed, no block or cover of
running area, wider field of vision, easier
for gait analysis.
8 Resistance Levels
Run at no resistance
J og at low resistance
Walk /Push at medium resistance
Sled Push at high resistance
Non- motorized
Power: Cordless (Self Generated);
Display uses batteries
Speed: Resistance adjustment by a
rotary knob
Console Readouts: Time, Distance,
Calories, and Speed
Running belt size (L x W)：67 in x 18 in
(1700 mm x 440 mm)
Weight: 346 lb (157 kg)
Dimensions (L x Wx H): 78 in x 34 in 59.5
in (1981 mm x 864 mm x 1511 mm)

3
1. SAFETY CAUTIONS ............................................................................................ 4
2. TECHNICAL STANDARD...................................................................................... 6
3. MACHINE DIAGRAM ......................................................................................... 7
4. INSTALLATION PROCEDURES&MACHINE DEBUG ............................................. 8
5. OPERATION GUIDE ........................................................................................ 12
6. PACKING LIST .................................................................................................. 14
7. EXPLOSIVE VIEW ............................................................................................. 15
8. PARTS LIST ...................................................................................................... 16

4
Please read all precautions and instructions in this manual before using this
equipment.
1. This Curve treadmill is suitable for commercial fitness clubs, clubhouse fitness,
bodybuilding training, sports training, physical education and so on.
2. This Curve treadmill is suitable for indoor use, do not use it outdoors or in high
humidity situation. Do not splash water or any other liquid on the treadmill. Do
not put or insert any abnormal things on the treadmill.
3. Please ensure its 4 feet on the ground when using it and placed it smoothly.
There should retain 2000 mm * 1000 mm of safety space behind the treadmill.
4. When using the treadmill, please wear appropriate sportswear and sports
shoes. For the exerciser who use the treadmill for the first time, professional
guidance will be needed. In the event of an emergency, stop the machine
immediately.
5. It is forbidden to let two or more people stand on the treadmill at the same
time, the maximum load weight is 170 kg.
6. The heart rate sensor is not professional medical equipment, there are many
reasons which can cause inaccurate detection, test results are for reference
only.(Hold the heart of the handrail with both hands, several seconds later, to
get a relatively accurate heart rate).
7. The action guidance:
A. Aerobic exercise : energy consumption, improve cardiopulmonary skills,
accelerate the blood circulation, enhance physical fitness, loss weight.
B. When using this treadmill for the first time, exerciser needs to hold the
handrail to keep the balance.
C. People can only walk down the treadmill after after safety confirmation.
8. Any part of treadmill can not be in loose status.
9. Never touch any parts of running treadmill with your finger.
10. People with long hair should pay attention to the safety of hair when using this
treadmill.

5
11. When you feel uncomfortable when using this treadmill, please stop
immediately and consult to the doctor.
12. Please check and make sure every bolt and screw was locked tight every time
before you start to use the treadmill. If any of them is loose, please change or
fixed it.
13. There must be the mark of “Stop” in maintenance.
14. If there is abnormal noise or other abnormal situation of the treadmill, please
stop running immediately and contact our after-sales department immediately,
or seek professional help.
15. This treadmill is coincident to the type of SC in EN 957-6.

6
Input supply voltage: four-cell dry battery
Time: 0:00 —99.59
Distance: 0.00 —99.99 (km)
Calories: 0 —999 (kcal)
Heart rate: 60 —300 (beats/min)
Rotating speed: 0 —90（KM/H）
Resistance adjustment level: 1 —8
(at1, the resistance is 0, at 8, the resistance is maximum)

7
Handle
Console
Running belt
Foot
Pedal
Console
holder
Stand column
Carry handle

8
Taking easy-assembly as the principle:
User Manual of this section is designed to ensure that the treadmills can be assembled
correctly and easily.
Considering the big size of the treadmill, please select the location where the
treadmill will be placed and ensure there is enough space around it.
Place all parts of the treadmill in the empty area and remove all packing materials.
Do not discard the packing materials until the assembly work is completed.
All bolts must be tightened during the assembly process unless otherwise stated,
and all bolts must be tightened when the assembly work is completed.
When assembling the treadmill, please make sure all parts are assembled
according to the assembly drawing.

9
Assembly step one:
Connect the magnetic induction line and assemble the stand column.
Assembly instructions:
1) Remove the packing materials on both sides of the stand column.
2) Fix the stand column to the corresponding position of the main frame as shown in
the picture below.
Note: Connect the magnetic line below.
Magnetic
wire
connecting
(one wire
only)
Connect up
and down
(one wire
only)

10
Assembly step two:
Connect the magnetic induction line，assemble the console holder and handrail
Assembly instructions:
1) Connect the magnetic induction line of the console holder to those in the stand column.
2) Fix the console holder tightly with the stand column as shown in the picture below, using
2 pcs of (27).
3）Fix the handrail tightly with the stand column as shown in the picture below
Magnetic
wire
connecting
(one wire
only)