FRENCH FITNESS FF-FT500 User manual

FF-
FT500
FRENCH FITNESS FT500
LIGHT COMMERCIAL TREADMILL
ASSEMBLY MANUAL

WARRANTY
10 Years Parts, 1 Year Labor (Light Commercial)
 Super folding
 18mm Soft Running board
 LED
 110 VAC 60Hz standard
 2.0 HP continuous AC Motor Peak: 4.0HP
 Speed range: 0.62 - 15.5mph
 Incline: Auto 0-10%
 Running Belt: 580 x 1600mm
FEATURES
 Max User Weight: 330lb (150kg)
 Weight: 313lb (142kg)
 Dimensions: 82"L x 41"W x 54"H (210.6cm x 106cm x 139cm)
TECH SPECS

4
5
3 6
4 8
5 9
6 11
7 13
8 15
9 17
10 24
11 27
12 28
13 31
CONTENTS

1. SAFETY INSTRUCTIO
N

2. SPECIAL SAFETY IN
STRUCTION

3. CONFIGURATION LIS
T

8
4. EXPLOSION DIAGRAM

9
y
l
One of
each side
5. LIST OF EXPLOSION
DIAGRAM

10
Lower cover of panel

11
6. STEPS OF ASSEMBLY

12

13
7. STRUCTURE OF FINI
SHED PRODUCT

14

15
8. OPERATING INSTRUC
TION OF TREADMILL

16

17
I. Parameter Specification
Motion Parameters under different running modes:
 Lowest speed displayed: 1 km/h
 Highest speed displayed: 25 km/h
 Longest running time under TIME MODE: 99 mins
 Shortest running time under TIME MODE: 8 mins
 Longest running distance under DISTANCE MODE: 99 km
 Shortest running distance under DISTANCE MODE: 1 km
 Largest calorie consumption under CALORIE MODE: 990 cals
 Smallest calorie consumption under CALORIE MODE: 20 cals
 Shortest running time of P01-P12 automatic program: 8 mins
 Longest running time of P1-P12 automatic program: 99 mins
 Lowest incline displayed: section 0
 Highest incline displayed: section 0-10% (18 Levels)
II. Specification on Display Window of Electronic Meter
Content displayed on electronic meter:
SPEED window: 1. Display speed when running
2. When automatic program is set, display corresponding speed of
section
TIME window: 1. Display running time when running
2. When automatic program is set, display the set running time
3. When fat rate test is set, display all parameters set
9. OPERATING INSTRUC
TION OF
INSTRUMENT

18
DISTANCE window:
1. Display running distance when running
2. When automatic program is set, display the serial number of the program
CALORIE window:
1. Display calories consumed when running
HEART RATE window:
1. Display the corresponding heart rate when both hands grasp the heartbeat sheet steel
INCLINE window:
1. Display the running incline when running
2. When automatic program is set, display the corresponding incline of section 1
LATTICE window:
1. Display
400-meter-long annular runway under full-manual operation mode
2. When automatic program is set, display corresponding speed program graph; after
startup, circularly display program graph of speed and incline. Current motion section
speed or incline graph blinks.
3. When safety key is disconnected, display: SAFETY KEY DISCONNECTED
4. When quick stop switch is on, display: QUICK STOP OPEN
5. During fat rate test, display: FAT RATE TEST
6. When inputting gender, display: MALE
7. When inputting age, display: INPUT AGE
8. When inputting height, display: INPUT HEIGHT
9. When inputting weight, display: INPUT WEIGHT
10. When starting fat rate test, display: FAT TEST, PLEASE WAIT
III. Functional Specifications on Keys
1.
Functional keys on keyboard plate:
 Speed shortcut: 3 (4, 8, 12)
 Incline shortcut: 3 (4, 8, 12)
 START key STOP key
 PROG key MODE key
 PREV key NEXT key
 Volume + key Volume - key
 Speed + key Speed - key
 Incline + key Incline - key
IV. Specification on Functions and Operation of Keys
 START — functional description: starts motor Operation instruction:
1. This key may start motor when electronic meter is under full-manual operation mode
2. This key may start motor when electronic meter is under countdown mode
3. This key may start motor when electronic meter is under automatic program mode
 STOP— functional description: stops motor Operation instruction:
1. This key may stop motor when electronic meter is on
2. When the motor comes to a full stop, all data are reset. Switch to full-manual operation
mode.

19
 PROG— functional description: selects automatic program and FAT Operation
instruction:
1. This key may access to setting of automatic program when electronic meter is under
full-manual operation mode
2. After under automatic program setting, fat rate test setting may be available if continue
to use this key.
3. Operation process: automatic program setting —fat rate test setting — Full-manual
operation mode
 MODE— functional description: selects countdown mode
Operation instruction:
1.
Th
is key may access to setting of countdown mode when electronic meter is under full-
manual operation mode
2. This key may be used to set next parameter under fat rate test setting mode
3. Operation processes in standby: Time countdown- Distance countdown- Calorie
countdown- Full-manual operation mode
4. Operation processes under fat rate test setting: Set gender— Set age— Set height— Set
weight— Fat rate test
 SPEED +/- — functional description: Adjust speed when running and
parameter values under parameter setting
Operation instruction:
1.
M
ay adjust the running speed when electronic meter is on
2. May
adjust parameter values set when under parameter setting
 INCLINE +/- — functional description: Adjust incline when running and parameter
values under parameter setting
Operation instruction:
1.
May
adjust incline when electronic meter is on
2. May
adjust parameter values set under parameter setting
 Speed shortcut— functional description: Directly select speed when running
and directly set a speed value on custom-defined program screen
Operation instruction:
1.
May directly set corresponding speed when electronic meter is on
 Incline shortcut— functional description: Directly select incline when running
and directly set a speed value under custom program setting
Operation instruction:
1.
May directly set corresponding incline when electronic meter is on
 PREV/NEXT— functional description: Select songs in USB
Operation instruction:
1. May switch songs in connection with USB (when MP3 jack is in vacancy) after power
on and connect safety key

20
 Volume +/- — functional description: Adjust volume of songs in USB
Operation instruction:
1. May adjust the volume of songs in connection with USB (when MP3 jack is in
vacancy) after power on and connect safety key
V. Specification on Running Modes
A. Manual Mode Functions
Switch to manual mode:
Enter full-manual operation mode after electronic meter and the screen are on. Press START
to run under manual operation mode.
Operation instruction:
Initial speed is 1KM/H. Positive counting of time, distance, and calorie is started from 0.
Adjust running speed through SPEED +/- and incline through INCLINE +/-.
If the running time exceeds 99 h and 59 min, system will not stop and the time will recount from 0.
B. Countdown Mode Functions
1. Switch to time countdown mode:
Select time countdown mode through MODE under
full-manual operation mode. Then, the TIME
window displays 30:00 mins which flashes., displaying that the running time may be adjusted through
SPEED +/- or INCLINE +/-, set range being 8:00-99:00 mins and press START to run under time
countdown mode.
Operation instruction: Initial speed is 1KM/H. T
IME window counts down as per the set running time. Positive counting of distance and calorie
windows is started from 0. Adjust the running speed through SPEED +/- and incline through
INCLINE +/-. When the set time counts down to 0, the electronic meter gradually stops. Once
the speed reduces to 0, lattice window immediately displays “End” in company with 5 prompt
tones (each per second). Five seconds later, all data are reset and the electronic meter
automatically goes back to initial standby state.
2. Switch to distance countdown mode:
Select distance countdown mode through MODE under
full-manual operation mode. Then, the
DISTANCE window displays 1.0 km which flashes. Required running distance may be adjusted
through SPEED +/- or INCLINE +/-, set range being 1.0~99.0 km and press START to run under
distance countdown mode.
Operation instruction: Initial speed is 1KM/H. DISTANCE window counts down as per the set
distance. Positive counting of time and calorie is started from 0. Adjust the running speed
through SPEED +/- and incline through INCLINE +/-. When distance counts down to 0, the
electronic meter gradually stops. Once the speed reduces to 0, speed window immediately
displays “End” in company with 5 prompt tones (each per second). Five seconds later, all data
are reset and the electronic meter automatically goes back to initial standby state.
3. Switch to calorie countdown mode: Select calorie countdown mode through MODE under
full-manual operation mode. Then, the CALORIE window displays 50 flashes. Running calorie
may be adjusted through SPEED +/- or INCLINE +/-, setting range being 20~990. Press START to
run under calorie countdown mode.