FRENCH FITNESS FF-T800 User manual

FF-T800
FRENCH FITNESS T800
COMMERCIAL TREADMILL
ASSEMBLY MANUAL

10 Years Parts, 1 Year Labor (Commercial)
WARRANTY
•Dimensions: 89"L x 38" x 69"H (2250mm x 965mm x 1750mm)
•Running surface: 61" x 23" (1550mm × 590mm)
•Running belt: 23" (585mm) Width, 136" (3460mm) Perimeter
•Machine Weight: 406lbs (184kg)
•Packing Size: 89" x 40" x 26" (2270 x 1020 x 650mm)
TECH SPECS
EXPLODED VIEW
•LED display screen: Multi-window LED display
screen
•Console upright: Aluminum alloy
•Sliding rail: Hardened high-strength PVC
•Handrail: Once formed PU foam
•Adjusting knob: Rotary knob (ALPS encoder
from Japan adopted)
•Heart rate sensor chip: Injection molded; never
slips
•Running belt: 3.0T (Germany FORBO SINGLING
none Daub Silicon Oil Running Belt)
•Running board: High-strength, 25T
•Max static load capacity: 400lbs (180kg)
•Water bottle holder: Personal belongings such
as water bottles, mobile phones, and portable
music players can be put here.
•Lubrication: Self-lubrication system controlled
by Micro-PLC
•Elevator motor: Voltage 110 - 120V; Speed
1475 r/min; Frequency 50HZ; Output power
60W; Insulation Grade B
•Main motor: Rated power 3.0HP; Max power
7.0HP
•Transport wheel: Integrated double wheels
system with big span; effectively improves the
stability of the machine.
•California Residents see Prop 65 WARNINGS
CONSOLE
•Touch control: When a key is pressed, it
produces a sound with a click.
•User-defined program: 3 Heart rate modes;
Distance Mode; Calories mode; Time mode;
Manual mode
•Preset program of keyboard: P1 (Manual); P2
(Alpine pass); P3 (5K Loop); P4 (Training tools);
P5 (Forest walk); P6 (Trailblazer); P7 (10K loop);
P8 (Random hill)
TECH SPECS
•User-defined program (LED): Calories count
down mode; Distance count down mode;
Time count down mode
•Preset program (LED): P1, P2, P3, P4, P5, P6,
P7, P8
•Language: English; Spanish; Chinese; Russian;
etc.
•iPad: NO
•Media player: Available for digital television
signal, high definition television signal, and
cable television signal.
•USB: Yes
•Readouts: Time, Distance, Calories, Power,
Heart rate, Speed
•Heart rate monitoring: The heart rate sensor is
inside a fixed handle; it increases precision
and makes it suitable for users of all body
shapes.
•Heart rate display: Heart rate is displayed in
real-time. After age and weight are input, it
effectively helps users to have
cardiorespiratory exercise and lose weight
when programs like "Fat burn", "Cardio
exercise" or "Target" is running.
•Heart rate range: 50 - 256 (times/min)
•Calories range: 0 - 999 Calories (0-999 kcal）
•Distance Range: 0.00 - 62 Miles (0.00 - 99.9
km)
•Time range: 0:00 - 99:59
•Speed range: .6 - 12.4 mph (1.0 - 20.0 km/h)
•Incline range: 0 - 15%
•Max user weight: 400 lbs (180 kg)
POWER SOURCE
•Power source: External power supply; AC 110 -
120V ±10% (50Hz/60Hz)
•Power cord: AC 110 - 120V, 16A
•Overload protector: 13A
•Working temperature: 32 - 104 ℉(0 - 40 ℃)

3
Caution....................................................................................................................4
The Parameter of Technology.................................................................................5
Drawing ...................................................................................................................6
Assembly Instruction ...............................................................................................7
Instrument operation guide....................................................................................12
Machine debugging process .................................................................................16
Adjustment Instructions / Maintenance..................................................................16
Explode View· .......................................................................................................19
Parts List· ..............................................................................................................19
TABLE OF CONTENTS

4
Read all precautions and instructions in this manual before using this equipment.
1. The machine is suitable for commercial fitness clubs, clubhouse fitness, bodybuilding
training, sports training, physical education and so on.
2. The machine must be reliable grounding, forbidden without grounding line using the
treadmill.
3. To avoid the risk of electric shock, unplug the power cord before cleaning or servicing
the machine.
4. Located indoors and in a treadmill is appropriate, avoid to be affected with damp be
affected with damp, do not allow the water or other liquid splashes on the treadmill, are
not allowed to place on the treadmill or insert any foreign body
3. Machine in the running process, the moving parts will produce electrostatic, stay
awayfrom flammable items
4. Use the treadmill should ensure its 4 feet on the ground, and placed a smooth,
reliable, and the treadmill should retain the fuselage behind the safety of the 2000 mm
* 1000 mm space. 5.Recommend the use of running machine wear sportswear and
proper sports shoes, Thefirst time you use this device, you must have professional
guidance. In the event of an emergency, you need to stop the machine immediately.
6. It is forbidden to stand in treadmill running on direct start, run before should be
standingon the two side, hold the handrail after start to use the computer
7. During the running process, the treadmill is not allowed to leave or board the
treadmill. It is not allowed to run and walk backwards on the treadmill.
8. Don't allow two or more than two people at the same time on the treadmill exercise,
thistester Max users weight is 170 kg.
9. The heart rate sensor does not belong to medical equipment, there are many reasons
can cause inaccurate detection, test results are for reference only. (30 seconds later
will have a more ready to heart rate value).
10. The action guidance:
A. Running: energy consumption, improve cardiopulmonary skills, accelerate the blood
circulation, improve human quality, achieve weight loss, toning.
B. Feet to stand on the treadmill before you start on both sides of the side bar, running
and began to work again on a run. In the process of running, half against their hands,
arms swing naturally, visual ahead, try not to step on your feet running belt edge. If it is
used for the first time, need to holding the handrail, to keep the balance of the body
C. Adjust speed and slope, be sure to adjust slowly, adjustment as far as possible.
D. People walk down the treadmill after the belt stop
totally.The action guidance:
11. With the power corn with the treadmill, insert it to the the plug in front of treadmill
12. Any part of treadmill can not be in loose status.
13. Please turn off the power in time when the machine is used. (The red power switch on
the front of the fuselage, when the switch hits “O”, the power is off; when the power
switch is “-”, the power is on)
CAUTI ON

5
14. Incorrect or overload training may cause the damage of the motor and
controller,accelerate the aging transmission system, even bodily injuries.
15. Never touch any parts of running treadmill with your finger
16. People with long hair should pay attention to the safety of hair when using.
17. When you feel uncomfortable and unusual, pls stop at once and consult to the doctor.
18. There is the emergency buttom inthe middle of front handle .If there are something
emergency , pls press it quickly and the machine will stop at once.
19. When stop use the machine , take away the power cord and keep it well, in case some
oneuse it without agreement.
21. There must be the mark of stoping using when the machine isin maintenance.
22. When stop use the machine , take away the power cord and keep it well, in case some
oneuse it without agreement.
23. If the treadmill has abnormal sound or other abnormal conditions, please stop
running immediately and contact our after-sales department in time, or seek
professional help.
24. This machine is confirmed to the type of CS in EN 957-6.
The Parameter of Technology：
Input power voltage :AC 220V±10%（50Hz Or 60Hz
）Motor rated power ：3.0HP（2.2Kw）
The Max motor Power：7HP
Temperature range ：0—40℃Speed：
1.0—20.0（km/h）
Time ： 0 ： 00—99.59
（ min:sec ） Distance：0.00—99.59（
km）Calories：0—999（kcal）
Heart rate ：50—256（Times/Min）
Incline ：（ 0—20 ） %
Specification of overload protector ：
13ASpecification of wire ：10A
AC250V

6
18.5 inches
LED
Shelf
Acrylic board
Emergen
cy stop
switch
Heart rate
Hand
Side
Colum
Lifting
roller
Motor Cover
Rear tail
D R AWI N G

7
Make the assembly work easier.
This section of User Manual only to ensure that the treadmill can be assembled correctly and
easily. In fact, if you assemble the Treadmill base on the user manual, the work will finish
smoothly.
● Since this Treadmill size is big ,so please choose a big place to install the treadmill to
ensure you have enough space .
● All parts of the treadmill will be placed in empty area and remove all packing materials
before assembly work unfinished, do not discard the packaging material.
● During assembly, if no noted, all bolts must be tightened, and after assembly is completed
please do Tighten test for all bolts .
● When assembling electric treadmill, make sure all parts are assembled according to the
assembly diagram.
ASSEMBLY INSTRUCTION

8
Communicati
on line
connection
(the only
corresponding
interface of
the
communicatio
n )
Connect to communication line and assembly support
Instruction:
1 ） Take down the packing material of support
2 ） Fix the support on the frame as the picture
Attention: Connect the communicate line
below.
STEP 1

9
Connect the communication line and heart rate line,leave interspace to put hear rate
line, communication line and power line ，assemble the table frame：Assembly
instructions：
1）butt joint communication lines in support and frame2）
Fix the case to the corresponding position of the column, and fasten thecombination of the
table frame and the column connection bolt.
STEP 2
Communicati on line
connection (the only
corresponding
interface of the
communication)

10
Assembling the left and right handrails and laying the heart rate line
1) Remove the left and right handrails and assemble the left and right
handrails;
2) cloth the heart rate line;
Place the
heart rate
cord in
the dial
holder
STEP 3