FRENCH FITNESS FT300 User manual

PLEASE READ ALL INSTRUCTION IN THE OWNER'S MANUAL CAREFULLY
BEFORE ASSEMBLY AND USE THE TREADMILL.
AND KEEP IT FOR FUTURE REFERENCE.
FF-FT300
FRENCH FITNESS FT300 FOLDING TREADMILL
ASSEMBLY MANUAL













QUALITY GUARANTEE COMMIITMENT.................................................................. 4
SAFETY INSTRUCTION .......................................................................................... 4
S P E C I C A L S A F E T Y I N S T R U C T I O N .................................................. 5
DESCRIPTION OF ASSEMBLY ............................................................................... 5
CONFIGURATION LIST ........................................................................................... 6
E X P L O S I O N D I A G R A M ............................................................................. 7
PARTS LIST OF EXPLOSION DIAGRAM ................................................................ 8
STEPS OF ASSEMBLY .......................................................................................... 10
OPERATING INSTRUCTION ................................................................................. 12
CONSOLE OPERATING INSTRUCTION ............................................................... 13
FAULT ANALYSIA AND HANDLING ...................................................................... 18
DAILY MAINTENANCE .......................................................................................... 20
HOW TO ADJUST RUNNING BELT ....................................................................... 21
IMPORTANT MATTER ........................................................................................... 24

4
Thank you for purchasing this product. It will improve your health.
I. Quality Guarantee Commitment
We ensure that this product is made from high-quality materials. We will repair
the product if it has problems in normal use.
Warranty period is 1 year (from the date of purchase). If the product you purchase has quality problems, please
contact with our customer service personnel in 12 months. Please don’t deal with the problems without permission.
We are responsible for repair of the following accessories: frame, wires, foam on armrest, motor, moving wheels,
etc. The following cases are beyond the scope of warranty:
• Damage for external reason.
• Use non-original accessories.
• Handle incorrectly by yourself.
• Fail to operate as instructed.
Quick-wear parts will not be repaired or replaced if normally worn, such as running belt, etc.
This quality guarantee commitment is only valid for private use of family and inapplicable to gymnasium
and other situations of professional training.
Please contact with our customer service personnel to buy accessories beyond scope of warranty and provide the
information below when ordering:
• Instruction.
• Model of treadmill.
• Serial number of accessory.
• Proof of date of purchase.
Please don’t send the product to our company before our customer service personnel confirm. We refuse to bear any
expenses if you send back the product without permission.
II. Safety Instruction
Many safety problems are considered in design and manufacturing of the product, but please still operate according
to the instruction below just in case. We are not responsible for any consequences caused by abnormal operation.
In order to ensure your safety and prevent accidents, please carefully read the operating instruction before use.
1. Please consider your physical condition when training with the product, and train in an appropriate and
regular way to ensure that you have enough physical strength. Wrong or excess training will be harmful to your
health.
2. This product is unsuitable for children. Those that feel unwell or are mentally defective and lack common
sense of use shall not use the product unless under guardianship or guidance of people responsible for their safety.
Children shall be prevented from fiddling with the equipment.
3. This product is suitable for home use instead of professional training and test or medical treatment.
4. Heart rate display of this product does not provide data for clinical medicine.

5
5. The damaged power line must be replaced by manufacturer or professional maintenance personnel
to prevent danger.
6. Please inspect all components and ensure that screws and nuts are tightened before use.
7. Please wear comfortable tight clothes when using the product to prevent the clothes from being hooked by
the machine. Don’t let kids or pets play nearby to avoid accidents.
8. Please place the product on smooth, clean and flat ground, ensure that there is nothing sharp nearby and
don’t use it near source of water and heat.
9. Don’t touch any moving parts with hands or place hands or feet in gap beneath the running belt.
10. This product can only be used by one person when running.
11. Ensure that screws and bolts are tightened after assembly of the product.
12. Please use accessories provided by the factory and don’t replace them without permission.
13. This product is HC product. The weight of user is not more than 150kg.
III. Special Safety Instruction Power
source
• Place the treadmill where the plug can reach the socket.
• Directly insert the power line into socket and keep it firm.
• Please use qualified socket to avoid consequential danger. If the plug and socket are incompatible, ask the
electrician to deal with it instead of moving the plug.
• 220V—240VAC power source is used.
• Please keep power line away from roller, and don’t place power source on running belt or use damaged
plug.
• Please pull the plug out from the socket before cleaning and maintenance.
Warning: failing to pull out the plug may cause personal injury and damage to equipment.
• Please inspect each component before use.
• Please don’t use the product outdoors, at high humidity and in the sunshine.
• Please turn off the machine and pull out the plug when leaving.
IV. Description of Assembly
• Please carefully read steps of assembly before assembly.
• Take out all wrap pages and place them on clean ground, which is convenient for you to check and install.
• Carefully check whether components are complete according to packing list.
• Please pay attention to safety when using tools or handling. Please don’t install forcibly as you like in
assembly.
• Please confirm whether the tools and packing materials left are dangerous. Plastics and foam are harmful to
kids.
• Assemble the product according to the instruction. Please carefully read steps and description of assembly.
• The product must be carefully installed by adults, and by professionals if necessary.
Warning: carefully install the product without damaging it.

6
MP
3 CONNEC
TING
LINE
BASE FRAME + DISPLAY
METER SET
SIDE COVER (L+R)
TOOLS
KIT
MP3 CONNECTING LINE
SAFETY LOCK
MANUAL
SCREW BAGS
SAFETY LOCK
SILICONE OIL
INSTRUCTION
MANUAL
SCREW BAGS

7

8
NO.
PARTS NAME
Q'TY
54
Motor belt
1
55
Running belt
1
56
∮24*33*M8(Internal fangs）Round cushion
8
57
∮40*∮50*T18 adjustment foot pad
4
58
φ60*φ35*65*M10*22 Foot pad
2
59
∮24*33*M8 Round cushion
2
60
15*25*25 Silicone oil tank
1
61
∮10.5*∮46*T3 rubber gasket
2
62
Power line (with tail plug)
1
63
∮31*∮19*H16 magnetic ring
1
64
Overload protector
1
65
Upsidedown T-shaped socket
1
66
150mm AC connecting line(Red)
3
67
Power swtich
1
68
150mm Ground line
1
69
150mm AC connecting cable(Black)
2
70
Heart rate line
2
71
Key button board
1
72
Computer middle line length:1100mm
1
73
Computer middle line length:1800mm
1
74
Safety lock
1
75
Louder Speaker
2
76
Inverter
1
77
MP3 connecting line
1
78
φ10-20*T1.5 flat washer
4
79
φ8-16*T1.5 flat washer
26
80
φ4.2*φ16*T0.8
13
81
φ8-14*T2.0 spring washer
4
82
M4*10 Cross combination screw
1
83
M8 Lock nut
8
84
M10 lock nut
4
85
M4*15 Cross large flat head screw
6
86
M8*15 Hexagon socket head cap screws
2
87
M8*20 Hexagon socket head cap screws
8
88
M8*30 Hexagon socket head cap screws
Length:20
1
89
M8*40 Hexagon socket head cap screws
Length:20
2
90
M8*45 Hexagon socket head cap screws
Length:20
1
91
M8*55 Hexagon socket head cap screws
Length:20
6
NO.
PARTS NAME
Q'TY
1
Pedestal
1
2
Upright post(L)
1
3
Upright post(R)
1
4
Incline frame
1
5
Main frame
1
6
Display meter frame
1
7
Connecting iron sheets
2
8
Small armrest fixed iron sheets
2
9
Package stator
1
10
AC motor
1
11
Incline motor
1
12
Display meter
1
13
The top cover of Computer meter
1
14
The bottom cover of Computer meter
1
15
Small armrest
1
16
Small armrest lower cover(L)
1
17
Small armrest lower cover(R)
1
18
Side cover(L)
1
19
Side cover(R)
1
20
PU foam(L)
1
21
PU foam(R)
1
22
Motor top cover
1
23
Motor front cover
1
24
Rear cap
1
25
Rear cap inner trim cover
1
26
Rear cap side trim cover(L)
1
27
Rear cap side trim cover(L)
1
28
Top strip
1
29
Side strip(L)
1
30
Side strip(R)
1
31
Motor bottom cover
1
32
25*50*T2.0 Square tube plug
2
33
30*70*T2.0 Square tube plug
2
34
∮10*∮15*∮25 Plastic spacer
4
35
∮25*∮4.2*6 Side strip buckle
8
36
∮25*∮4.2*4.5 Side strip buckle
8
37
R-type wire clamp
2
38
Oil cap
1

9
92
M8*75 Hexagon socket head cap screws
Length:20
4
93
M10*40 Hexagon socket head cap screws
Length:15
1
94
M10*55 Hexagon socket head cap screws
Length:15
1
95
M10*25 Hexagon socket head cap screws
4
96
M8*60 Cylindrical head socket head cap screws
3
97
M8*70 Cylindrical head socket head cap screws
1
98
M8*25 Countersunk head hex head screw
8
99
ST2.5*8 Cross recessed round head self tapping
screw
6
100
ST3.0*8 Cross recessed round head self tapping
screw
12
101
ST4.0*13 Cross recessed round head self
tapping screw
9
102
ST4.0*16 Cross recessed round head self
tapping screw
61
103
ST4.2*13 headφ8 Cross round head self-drilling
screw
2
104
ST4.2*16 headφ8 Cross round head self-drilling
screw
38
105
ST4.2*25 headφ10 Cross round head self-drilling
screw
4
106
M8 lock nut
4
39
Fuel tank
1
40
∮48*∮8*23 Moving wheel
2
41
Running deck
1
42
Rear roller
1
43
Front roller
1
44
∮49*∮5*5 circle*60 compressed
spring
2
45
Gas spring
1
46
M6 L-shaped wrench
1
47
M5 L-shaped wrench
1
48
Tubing bushing ∮8.0*t0.3*15
1
49
Multi-function wrench
1
50
Heart rate iron (R)
2
51
Heart rate iron (L)
2
52
Speaker net cover (R)
1
53
Speaker net cover (L)
1

10
4X M8*20
4X(M8X55
SCREW)
4X(M8*20)
Step 1: installation of complete machine
1. Hold the Column and slowly pull to the fixing hole position.
2. Fix Column onto Pedestal with M8*20,M8*55 screw and M8 flat gasket.
3. Fix Display Meter onto the Column with M8*20 screw and M8 flat gasket.
①
③
4X(M8X20)
M8 Flat gasket
②
4X(M8*20)
4X(M8*55)screw
M8 Flat
gasket

11
Step 2: Assembly of left and right side covers
1.Remove the package stator that hold the frame and the base, and be careful not to hurt
someone when the frame bounces off.
2. Fix the left and right side covers on both sides of pedestal with M4*15 screw and lock them.
4X(M4*15 SCREW)
Finally, please ensure that all screws are tightened after all accessories are assembled.

12
Operating instruction of readmill:
Power socket with ground line must be used for your safety when you use the treadmill.
1. Insert power plug into socket and turn on power switch a (light turns red). You will hear
“beep” and window on instrument panel displays;
2. Place safety lock at yellow position of instrument panel, when the treadmill can be
normally used. Please clamp the safety lock onto your clothes when using the machine to avoid
accidents. You can open the safety lock at any time to immediately stop the motor to avoid
falling over. Please place the safety lock back and start starting program to use the machine again.
POWER PLUG

13
A. SCREEN DISPLAY:
1.“INCL” window:
Display the current incline value, display range is 0-20 Incline.
2.“SPEED” window:
The current speed value is displayed in the running state, display range is 1.0-22.0KM/h.
When the countdown is started, "3", "2", and "1" are displayed.
3.“DIS.” window:
Show distance:
The movement distance is displayed. The positive count is from 0.00-99.90. After overflow, it is
cleared and recounted. The reverse count is decremented from the set value to zero. When the
countdown reaches 0, the treadmill runs smoothly and the speed window displays “End ", 5 seconds
after the complete stop, enter the standby state.
In the running state, each time a run is completed, the number of turns is displayed for 2 seconds. “P01-
P02-...-P12-FAT” is displayed during program selection and setting.
4.“TIME” window:
The exercise time is displayed. The positive timing is from 0:00-99:59. When the time is up to 99:59,

14
the treadmill runs smoothly and stops running and displays “End”. After 5 seconds, it stops to enter the
standby state; the countdown is set. The time is decremented to zero. When the countdown reaches 0:00,
the treadmill runs smoothly and stops running. The speed window displays “End”, and 5 seconds after the
complete stop, it enters the standby state.
5.“CAL./PUL.”window:
Show Calories:
The calorific value is displayed. When the calorie value is displayed, the positive count is from 0.0-
999.0. After overflow, it is cleared and recounted. When the count is reversed, it counts down from the set
value to 0. When the countdown reaches 0, the treadmill The steady down speed stops running and “End” is
displayed, and the standby state is entered 5 seconds after the complete stop. Heartbeat display:
The heartbeat value of the user is displayed. When the user holds the heartbeat sensor handle in both hands,
the system can automatically detect the heartbeat frequency of the user and display it in this window. The
heartbeat value display range is 50-200 beats/min. (This data is for reference only and cannot be used as
medical data.)
B.KEY BUTTON FUNCTION:
1. “PROG” is the program key: In the standby state, press this button to cycle through “P01-P02-...- P12-
FAT”.
2. “P01-P12” is a built-in program.
3. "FAT" is a fat test.
4. “MODE” is the mode selection button: press this button to cycle through “0:00”, “30:00”, “1.0”, “50.0”
(“0:00” is manual mode, “15:00” is time) In the countdown mode, “1.0” is the distance countdown mode,
and “50.0” is the calorie countdown mode.) When selecting various modes, the speed and incline “+ or -”
keys can be used to set the relevant countdown value. After the setting is completed, Press the "START"
button to start the treadmill.
5. “START” is the start button: When the power is turned on and the safety lock is closed, press this
button at any time to start the treadmill.
6. “STOP” is stop button: This button can be used to stop the treadmill from running and reset to zero
during exercise.
7. “SPEED+”,“SPEED-”is Speed+/- button: When in standby state to adjust the set value. It is used
to adjust the speed after starting. The adjustment range is 0.1 km/time, and it automatically increases or
decreases continuously when it is held for more than 0.5 seconds.
8. “INCLINE+”、“INCLINE-”is Incline+/- button: When in standby state to adjust the set value.
It is used to adjust the slope after starting. The adjustment range is 1 segment/time. When it is continuously
pressed for more than 0.5 seconds, it will automatically increase or decrease continuously.
9. “SPEED: 4,8,12”KM/H is speed shortcut button: Speed settings can be made quickly.
10.“INCLINE:4,8,12”% is Incline shortcut button: Incline settings can be made quickly.
11. Entertainment function operation instructions:
The product is connected to the power supply. At this time, the MP3 audio source is inserted, and the
speaker can play MP3 music; insert the USB device, the product
The music in the USB will be played automatically; Volume - :
press this button to decrease the volume; Volume +: press this
button to increase the volume; Previous song: Press this button
for the previous song; Next song: press this button for the next
song; Play/Pause: Press this button to play or pause music.
C. QUICK START (MANUAL MODE):
1. Turn on the power switch and properly attach the magnetic safety lock to the safety lock position under
the panel.
2. Press the “START” start button, the system enters the 3 second countdown, the buzzer sounds,

15
and the speed window displays the countdown. After the 3 second countdown, the treadmill starts running
at 1 km/h.
3. After starting, use the “SPEED+” and “SPEED -”keys to adjust the speed of the treadmill as
needed; use the “INCLINE+” and “INCLINE -”keys to adjust the gradient of the treadmill.
D.OPERATION DURING EXERCISE:
1. Press the “SPEED -”button to decrease the running speed of the treadmill.
2. Press the “SPEED+” button to increase the running speed of the treadmill.
3. Pressing the “INCLINE -”button will reduce the slope of the treadmill.
4. Press the “INCLINE+” button to increase the slope of the treadmill.
5. Press the stop button to slow down the running opportunity until it stops running.
6. When the athlete holds the heartbeat handle with both hands, the heartbeat data is
displayed for about 3 seconds.
E.MANUAL MODE:
1. In the standby mode, press the “START” button directly, the treadmill starts running at 1.0 km/h speed
and incline 0; other windows start counting from 0, press “INCLINE+”, “INCLINE -”, “SPEED+” ",
"SPEED -" button changes the incline and speed.
2. In the standby mode, press the “MODE” button to enter the time countdown mode. The “TIME” window
displays “30:00” and flashes. Press the “INCLINE+”, “INCLINE -”, “SPEED+”, “SPEED - ”buttons. The
movement time can be set from 5:00 to 99:00.
3. In the time countdown mode, press the “MODE” button to enter the distance countdown mode, the
“DIS” window displays “1.00” and flashes, press the “INCLINE+”, “INCLINE -”, “SPEED+”, “SPEED -
”buttons The movement distance can be set, and the distance setting range is 0.50-99.9.
4. In the distance countdown mode, press the “MODE” button to enter the calorie countdown mode, the
“CAL” window displays “50.0” and flashes, press the “INCLINE+”, “INCLINE -”, “SPEED+”, “SPEED -
”buttons Calories can be set, the calorie setting range is: 10.0-999.0.
5. Select one of the three countdown modes and press the start button after the setting is completed. The
treadmill will start running after 3 seconds delay. Press “INCLINE+”, “INCLINE -”, “SPEED+”, “SPEED
-”to adjust. Speed and Incline; Press the stop button to stop the treadmill.
F. THE BUILT-IN PROGRAM:
There are 12 built-in programs P01-P12 in the system. In the standby state, press the “PROG” key speed
window to display “P01-P12”. After selecting the favorite program, the “TIME” window will flash at the
same time; the preset time is 30:00. Press "INCLINE+", "INCLINE -", "SPEED+", "SPEED -" to set the
required exercise time, then press the "START" button to start the built-in program. The built-in program is
divided into 20 segments, each movement time. = set time / 20.
When entering the next paragraph, the system will generate “Bi-Bi-Bi-”3 sound prompts. The speed and
slope of the system will change with the block change. In the meantime, you can press “INCLINE+”,
“INCLINE -”, “SPEED+”, “SPEED - The key changes the speed and slope, but when the program enters
the next paragraph, it will return to the speed and slope of the segment. After running a program, the system
will issue 3 prompts for “B iB i- B i”, and the treadmill will drop smoothly. The speed stops running and
“End” is displayed, and the standby state is entered 5 seconds after the complete stop.
G. THE PROGRAM DESCRIPTION:
SPEED stands for speed and INCLINE stands for slope (18 slopes, each slope is 1/18 of the total
slope). Each program divides the exercise time into 20 equal parts, each with a corresponding speed
and slope.

16
Table：
TIMES
PROGRAM
SETTING TIME / 20 = EVERY GRADE TIME
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
P01
Slow walk
SPEED
3
4
5
5
6
5
5
4
5
5
6
5
5
4
5
5
6
5
5
3
INCLINE
2
2
3
2
3
2
3
2
3
3
2
2
3
3
2
2
3
3
2
2
P02
Fast walk
SPEED
3
5
6
7
7
6
6
7
7
6
6
7
7
6
6
7
7
6
5
3
INCLINE
3
4
5
5
4
4
3
3
4
4
5
5
4
4
3
3
4
4
2
2
P03
Variable
speed
running
SPEED
5
10
6
11
7
12
8
12
9
6
10
7
11
8
12
7
11
9
6
3
INCLINE
3
4
5
6
5
4
5
6
5
4
5
6
5
4
5
6
5
4
3
2
P04
Light run
SPEED
5
7
8
9
9
9
8
8
9
9
9
8
8
9
9
9
8
8
6
5
INCLINE
2
2
3
3
4
4
3
3
4
4
3
3
4
4
3
3
4
4
3
2
P05
Aerobic
running
SPEED
5
8
10
11
11
10
10
9
9
10
10
11
11
10
10
11
11
8
6
5
INCLINE
3
3
4
4
5
5
4
4
5
5
4
4
5
5
4
4
5
5
3
2
P06
Road
running
SPEED
4
6
7
8
9
10
10
9
9
10
10
10
9
9
10
10
10
8
6
3
INCLINE
0
0
1
1
1
2
2
2
1
1
1
0
0
1
1
2
2
1
1
0
P07
Beach run
SPEED
4
7
8
8
9
9
10
8
8
9
9
10
9
8
9
9
8
8
5
3
INCLINE
2
5
1
4
2
6
4
6
3
0
1
5
2
6
3
0
2
5
3
1
P08
Mountain
running
SPEED
4
6
8
9
9
8
8
9
9
9
8
8
8
9
9
9
8
7
5
3
INCLINE
6
8
12
6
11
8
10
6
8
10
12
10
8
12
7
10
10
8
6
2
P09
Body
sculpting
SPEED
5
7
10
11
12
11
11
10
9
10
11
11
12
11
11
10
10
9
8
4
INCLINE
2
3
4
5
6
6
5
5
4
4
5
5
6
6
5
5
4
4
3
2
P10
Lose
weight
SPEED
6
8
10
11
12
12
11
9
10
11
12
11
10
11
12
10
12
8
8
4
INCLINE
4
5
6
7
6
5
6
7
6
5
6
7
6
5
6
7
6
7
5
2
P11
Fat burning
SPEED
6
9
11
12
12
12
11
11
10
11
12
12
11
12
12
11
11
10
9
5
INCLINE
2
4
6
8
7
6
7
8
7
6
7
8
7
6
7
8
7
6
3
2
P12
Women
style
SPEED
3
6
8
8
8
9
9
8
8
8
9
9
8
8
8
9
9
7
5
3
INCLINE
2
2
3
3
3
2
2
3
3
3
2
2
3
3
3
2
2
3
3
2
H. BODY TEST:
In the standby mode, press the “Program” button continuously to enter the body mass index (FAT)
detection function, press the “Mode” button to enter the F-1, F-2, F-3, F-4, F-5 interface (F -1--sex, F-
2—age, F-3—height, F-4—weight, F-5-physical test), press “Speed+”, “Speed-”, “Incline+”, The
“Incline-”button can be used to set the parameters of 01—04 (the parameters are as shown in the table
below). After setting, press the “Mode” button to enter the F-5 physique detection interface. At this time,
hold the heart rate board with both hands 5-6. After the second, your body mass index will be displayed
to see if your weight and height are commensurate. The body mass index (FAT) is a
measure of a person's height and weight, not the body proportion, FAT is suitable for any male and
female, and other health. The indicators together provide the basis for adjusting the weight. The ideal

17
FAT should be between 20-24. If it is lower than 19, it means too thin. If it is between 25 and 29, it is
overweight, and if it exceeds 30, it is considered obese. (This data is for reference only and cannot be used
as medical data.)
F-1
Sex
01 Male
02 Female
F-2
Age
10------99
F-3
Hight
100----200
F-4
Weight
20-----150
F-5
FAT
≤19
Under weight
FAT
=(20---24)
Normal weight
FAT
=(25---29)
Over weight
FAT
≥30
Obesity
DISPLAY RANGE：
Setting parameter
Initial
Set the Initial
value
Set Range
Display range
Time (Min:Sec)
0:00
30:00
5:00-99:00
0:00－99:59
Incline (Segement)
0
N/A
N/A
0-20
Speed (KM/H)
0.0
N/A
N/A
1.0-22.0KMH
Distance (KM)
0.00
1.00
0.50-60.0
0.00－60.0
Heart rate(times /
minute)
P
N/A
N/A
50-200
Calories(Kcal)
0.0
50.0
10.0-999.0
0.0－999.0
I. SAFETY LOCK FUNCTION:
In any state, pulling off the safety lock can stop the running of the treadmill urgently, the treadmill will
stop urgently, the speed window will display "--", and the buzzer will give a "Bi-Bi" alarm 3; No other
operations can be performed outside of the shutdown. After the safety lock is properly re- installed, the
treadmill re-enters the standby state and waits for an input command.
J. POWER SAVING MODE:
The system has a power-saving function. If there is no key command input within 10 minutes in the
standby state, the system enters the power-saving mode, automatically turns off the display, and presses
any key to wake up the system again.
K. MP3 FUNCTION:
When connected to an MP3 or other audio device after power-on, the Display meter can play music. The
size of the sound is controlled on the audio device. Please pay attention to the size of the sound so as not
to affect the quality of the sound and the built-in audio circuit.
L. SHUTDOWN:
The treadmill can be turned off at any time by turning off the power switch so that it does not damage the
treadmill.
M. NOTE:
1. Check if the power is loaded before the exercise; check if the safety lock is valid.
2. An abnormal situation occurs during the movement, the safety lock can be pulled off, the running
opportunity is quickly decelerated to stop; then the safety lock is placed, the device is reset, and the input
command is awaited.
3. If there is any problem with this machine, please contact the dealer. Non-professionals, please do not
attempt to disassemble or repair to avoid damage to the equipment.

18
N. Fault Analysis and Handling：
Fault or phenomenon
Possible cause
Solve Method
Treadmill no display
A.Does not have a power supply, or no
power.
Connect the power cord to the AC, or
check the outlet.
B.Power switch is not turned on.
Set the power switch to the ON
position.
C.Drive is not powered or damaged.
Press the overload protector again or
replace the drive.
D.Electronic meter signal line
disconnection.
Replace the signal cable and reconnect
it.
E.Meter damage.
Change the Meter.
F.(LCD) backlight is not bright.
Need to repair, check the backlight, or
replace the backlight.
Treadmill display is
incomplete, lack of strokes
A.Display driver IC solder or solder.
Need to repair, check solder joints, re-
weld in place.
B.(Liquid Crystal) Conductive strip
slides, not fixed in place.
Reassemble the LCD.
C.Display driver IC is defective.
Need to repair, solder new display
driver IC.
Treadmill movement is not
smooth, powerless or jittery
A.There is resistance in the
transmission part.
Adjust the transmission part, or add
lubricant.
B.The belt is too tight or too loose.
Adjust the belt tension.
C.Drive torque is too small or too large.
Adjust the torque potentiometer to the
proper position.
M
E
T
E
R
D
I
S
P
A
L
Y
--- or---- (or display
E00/E07 according to
customer requirements)
A.Safety lock off.
Place the security lock on the panel to
pull or insert the card.
B.The magnetron is not sucking.
Magnetron installed to the correct
position.
E01-Communication
failure (the drive did not
receive the meter
signal);
E13-Communication
failure (the meter does
not receive the drive
signal)
A.The signal line of the electronic
watch is not connected or the contact is
poor.
Re-plug the line.
B.There is a short circuit or open circuit
in the signal line of the electronic
watch.
Change the signal cable.
C.Electronic meter signal line failure.
Change the Electronic Meter.
D.Drive signal line failure.
Change the Drive.
E02- Stall protection
(explosion protection or
main motor
abnormality)
A.The motor cable is not plugged in, or
the motor is open inside.
Re-plug the motor cable,or change the
Motor.
B.Drive IGBT breakdown damage
Change the Drive.
C.External AC voltage is too low
Stop using, ask the electrician to
troubleshoot.
E03-No speed sensing
signal (with speed
sensing driver)
A.The speed signal line is not
connected, or the sensor is damaged.
Re-plug the speed signal line,or change
the sensor.
B.Drive sensing line is bad
Change the Drive.
E04-Lift self-test
learning failure (with
lifting drive)
A.Lifting motor line or signal line is not
plugged
Check if the line connect is wrong, re-
plug the signal line.
B. lift motor bad
Change the Lift motor.
C.Drive bad
Change the Drive.
E05-Overcurrent
protection
A.Excessive load
System protection, restart when you
manually block
B.
The drive part is stuck or blocked
Adjust the transmission part, or add
lubricant
C.Internal short circuit of the motor
Change the motor.
D.Drive burnout
Change the Drive.
E06-Usually the motor
A.The motor cable is not plugged in
properly
Re-plug the motor cable.

19
is damaged
B.Internal damage of the motor
Change the Motor.
C.Motor idling
When the current is too small, please
report the error. Please install the test.
E08-Storage 24C02
error (outside 24C02
driver)
A.The storage IC is not plugged in (non-
switching power supply)
Re-insert into the IC holder, pay
attention to the PIN1 foot position.
B.The storage IC is damaged, or the
related line is bad.
Change the storage IC,or change the
Drive.
E09-Inverted error (with
inverted drive)
A.The treadmill is erected or placed
horizontally
Adjust the treadmill,placed
horizontally.
B.Bad drive inverted line
Change the Drive.
E10-Usually the motor
instantaneous peak
current abnormality,
over current protection
A.Drive torque is too large
Adjust the torque potentiometer to the
proper position.
B.Internal short circuit of the motor
Change the Motor.
C.The drive part is stuck
Adjust the transmission part, or add
lubricant
E11-External AC
voltage over voltage
(according to customer
requirements)
AC over voltage: higher than 270VAC
for 220V system; higher than 150VAC
for 110V system
Stop using, ask the electrician to
troubleshoot
E14-External AC
voltage under voltage
(according to customer
requirements)
AC under voltage: less than 160VAC
for 220V systems; less than 70VAC for
110V systems
Stop using, ask the electrician to
troubleshoot
O. Calorie calculation formula
70.3×V(Km/h)×t(h)×(1+?%)
In the case of ascending to 0, the calories burned per mile are 70.3 kcal.

20
Maintenance of electric treadmill:
Appropriate maintenance is the only way to keep your treadmill in optimum state. Wrong
maintenance will damage or shorten the service life of treadmill.
Important reminder:
•Please don’t clean the treadmill with sandpaper or solvent. The controller of treadmill shall
not be directly exposed to sunlight or damp to prevent damage.
•Frequently inspect and lock all parts of treadmill and immediately replace the damaged parts.
Regulate running belt
Adjustment of running belt is equipped with two functions: adjustment of degree of tightness and
central position of running belt. The running belt has been adjusted when leaving the factory, but
it will be stretched after use to deviate from central position to cause damage by wearing trim strip
and rear protecting cover. It is normal to stretch the running belt in use.
Adjust running belt
If the running belt is slip or not smooth when you use the treadmill, you can improve it by
adjusting degree of tightness of running belt.