FRENCH FITNESS T300 User manual

FF-T300
FRENCH FITNESS T300
LIGHT COMMERCIAL TREADMILL
ASSEMBLY MANUAL













4
5
3
6
4
8
5
9
6
11
7
13
8
15
9
17
10
24
11
27
12
28
13
31

8

9

10

11

12

13

14

15

16

17
I. Parameter Specification
Motion Parameters under different running modes:
· Lowest speed displayed: 1 km/h
· Highest speed displayed: 25 km/h
· Longest running time under TIME MODE: 99 mins
· Shortest running time under TIME MODE: 8 mins
· Longest running distance under DISTANCE MODE: 99km
· Shortest running distance under DISTANCE MODE: 1km
· Largest calorie consumption under CALORIE MODE: 990 cals
· Smallest calorie consumption under CALORIE MODE: 20 cals
· Shortest running time of P01-P12 automatic program: 8 mins
· Longest running time of P1-P12 automatic program: 99 mins
· Lowest incline displayed: section 0
· Highest incline displayed: section 18
II. Specification on Display Window of Electronic Meter
Content displayed on electronic meter:
SPEED window: 1. Display speed when running
2. When automatic program is set, display corresponding speed of section 1
TIME window: 1. Display running time when running
2. When automatic program is set, display the set running time
3. When fat rate test is set, display all parameters set
DISTANCE window: 1. Display running distance when running

18
2. When automatic program is set, display the serial number of the program
CALORIE window:
1. Display calories consumed when running
HEART RATE window: 1. Display the corresponding heart rate when both hands
grasp the heartbeat sheet steel
INCLINE window: 1. Display the running incline when running
2. When automatic program is set, display the corresponding incline of section 1
LATTICE window: 1. Display 400-meter-long annular runway under full-manual
operation mode 2. When automatic program is set, display corresponding speed program graph;
after startup, circularly display program graph of speed and
incline. Current motion section speed or incline graphblinks.
3. When safety key is disconnected, display: SAFETY KEY DISCONNECTED
4. When quick stop switch is on, display: QUICK STOP OPEN
5. During fat rate test, display: FATRATETEST
6. When inputting gender, display: MALE
7. When inputting age, display: INPUT AGE
8. When inputting height, display: INPUT HEIGHT
9. When inputting weight, display: INPUT WEIGHT
10. When starting fat rate test, display: FATTEST, PLEASEWAIT
III. Functional Specifications on Keys
1. Functional keys on keyboard plate:
· Speed shortcut: 3 (4, 8, 12)
· Incline shortcut: 3 (4, 8, 12)
· START key STOP key
· PROG key MODE key
· PREV key NEXT key
· Volume + key Volume -key
· Speed + key Speed - key
· Incline + key Incline - key
IV. Specification on Functions and Operation of Keys
· START —functional description: startsmotor
Operation instruction:
1. This key may start motor when electronic meter is under full-manual operation mode
2. This key may start motor when electronic meter is under countdown mode
3. This key may start motor when electronic meter is under automatic program mode
· STOP—functional description: stops motor
Operation instruction:
1. This key may stop motor when electronic meter is on
2. When the motor comes to a full stop, all data are reset. Switch to full-manual operation mode.
· PROG—functional description: selects automatic program and FAT
Operation instruction:
1. This key may access to setting of automatic program when electronic meter is under
full-manual operation mode

19
2. After under automatic program setting, fat rate test setting may be available if continue to use
this key.
3. Operation process: automatic program setting —fat rate test setting —Full-manual
operation mode
· MODE—functional description: selects countdown mode
Operation instruction: 1. This key may access to setting of countdown mode when
electronic meter is under full-manual operation mode
2. This key may be used to set next parameter under fat rate test setting mode
4. Operation processes in standby: Time countdown- Distance countdown- Calorie
countdown- Full-manual operation mode
5. Operation processes under fat rate test setting: Set gender—Set age—Set
height—Set weight—Fat rate test
· SPEED +/- —functional description: Adjust speed when running and parameter values under
parameter setting
Operation instruction: 1. May adjust the running speed when electronic meter is on
2. May adjust parameter values set when under parameter setting
· INCLINE +/- —functional description: Adjust incline when running and parameter values under
parameter setting
Operation instruction: 1. May adjust incline when electronic meter is on
2. May adjust parameter values set under parameter setting
· Speed shortcut—functional description: Directly select speed when running and directly set a speed
value on custom-defined program screen
Operation instruction: 1. May directly set corresponding speed when electronic meter is
on
· Incline shortcut—functional description: Directly select incline when running and directly set a
speed value under custom program setting
Operation instruction: 1. May directly set corresponding incline when electronic meter is
on
· PREV/NEXT—functional description: Select songs in USB
Operation instruction: 1. May switch songs in connection with USB (when MP3 jack is in
vacancy) after power on and connect safety key
· Volume +/- —functional description: Adjust volume of songs inUSB
Operation instruction: 1. May adjust the volume of songs in connection with USB
(when MP3 jack is in vacancy) after power on and connect safety key
V. Specification on Running Modes
A. Manual Mode Functions
Switch to manual mode: Enter full-manual operation mode after electronic meter and the
screen are on. Press STARTto run under manual operation
mode.

20
Operation instruction: Initial speed is 1KM/H. Positive counting of time, distance, and
calorie is started from 0. Adjust running speed through SPEED +/- and incline through
INCLINE +/-.
If the running time exceeds 99 h and 59 min, system will not stop and the time will
recount from 0.
B. Countdown Mode Functions
1. Switch to time countdown mode: Select time countdown mode through MODE under
full-manual operation mode. Then, the TIME window displays 30:00
mins which flashes., displaying that the running time may be adjusted
through SPEED +/- or INCLINE +/-, set range being 8:00-99:00
mins and press START to run under time countdown mode.
Operation instruction: Initial speed is 1KM/H. T
IME window counts down as per the set running time. Positive counting of distance and calorie
windows is started from 0. Adjust the running speed through SPEED
+/- and incline through INCLINE +/-. When the set time counts down
to 0, the electronic meter gradually stops. Once the speed reduces to
0, lattice window immediately displays “End” in company with 5
prompt tones (each per second). Five seconds later, all data are reset
and the electronic meter automatically goes back to initial standby
state.
2. Switch to distance countdown mode: Select distance countdown mode through MODE under
full-manual operation mode. Then, the DISTANCE window
displays 1.0 km which flashes. Required running distance may be
adjusted through SPEED +/- or INCLINE +/-, set range being
1.0~99.0 km and press START to run under distance countdown
mode.
Operation instruction: Initial speed is 1KM/H. DISTANCE window counts down as per the set
distance. Positive counting of time and calorie is started from 0.
Adjust the running speed through SPEED +/- and incline through
INCLINE +/-. When distance counts down to 0, the electronic meter
gradually stops. Once the speed reduces to 0, speed window
immediately displays “End” in company with 5 prompt tones (each
per second). Five seconds later, all data are reset and the electronic
meter automatically goes back to initial standby state.
3. Switch to calorie countdown mode: Select calorie countdown mode through MODE under
full-manual operation mode. Then, the CALORIE window
displays 50 flashes. Running calorie may be adjusted through
SPEED +/- or INCLINE +/-, setting range being 20~990. Press
START to run under calorie countdown mode.
Operation instruction: Initial speed is 1KM/H. CALORIE window counts down as per the set
calorie. Positive counting of time and distance is started from 0.
Adjust speed through SPEED +/- and incline through INCLINE +/-.