Friedrich FPHFC36A3B Wi-Fi Guide

1 PB
Service/ Parts Manual
Floating Air Pro Single- Zone
Cassette and Ducted
9261402_02
Type Model Model Revision
Outdoor Condensor FPHFR9A3A
Outdoor Condensor FPHFR12A3A
Outdoor Condensor FPHFR18A3A
Outdoor Condensor FPHFR24A3A
Outdoor Condensor FPHFR36A3A
Indoor Cassette FPHFC09A3A FPHFC09A3B Wi-Fi
Indoor Cassette FPHFC12A3A FPHFC12A3B Wi-Fi
Indoor Cassette FPHFC18A3A FPHFC18A3B Wi-Fi
Indoor Cassette FPHFC24A3A FPHFC24A3B Wi-Fi
Indoor Cassette FPHFC36A3A FPHFC36A3B Wi-Fi
Indoor Ducted FPHFD09A3A
Indoor Ducted FPHFD12A3A
Indoor Ducted FPHFD18A3A
Indoor Ducted FPHFD24A3A
Indoor Ducted FPHFD36A3A
Indoor Accessory FPCG0912
Indoor Accessory FPWC1
Indoor Accessory FPCG182436

2 PB
TABLE OF CONTENTS
Table of Contents
INTRODUCTION‑ 5
Important Safety Information‑ 5
Personal Injury Or Death Hazards‑ 7
Model Identication Guide‑ 8
Product Appearance ‑ Ducted and Cassette‑ 9
Product Appearance‑ Outdoor Units‑ 10
SPECIFICATIONS‑ 11
Product Specications Single‑Zone‑Cassette ‑ 11
Product Specications Single‑Zone Concealed Ducted ‑ 12
Product Dimensions: 9k, 12k, and 18k Ducted Indoor Units‑ 13
Product Dimensions: 24k Ducted Indoor Units‑ 14
Product Dimensions: 9k and 12k Cassette‑ 15
Product Dimensions: 18‑36k Cassette‑ 16
Product Dimensions: 9‑12k Outdoor Units‑ 17
Product Dimensions: 18k Outdoor Units‑ 18
Product Dimensions: 24k Outdoor Units‑ 19
Product Dimensions: 36k Outdoor Units‑ 20
Capacity Characteristics Chart‑ 21
Single Zone Ducted‑ 21
Sound Pressure Data‑ Ducted Indoor‑ 31
Sound Pressure Data ‑Cassettes‑ 33
Sound Pressure Data ‑Outdoor Units‑ 35
Air Flow Distribution 9k‑ 37
Air Flow Distribution 12k‑ 38
Air Flow Distribution 18‑24k‑ 39
Air Flow Distribution 36k ‑ 40
ESP (External Static Pressure) chart (Duct Type) 9k‑ 41
ESP (External Static Pressure) chart (Duct Type) 12k‑ 42
ESP (External Static Pressure) chart (Duct Type) 18k‑ 43
ESP (External Static Pressure) chart (Duct Type) 24k‑ 44
ESP (External Static Pressure) chart (Duct Type) 36k‑ 45
Refrigerant Cycle 9‑18k Outdoor Units‑ 46
Refrigerant Cycle 24k Outdoor Units‑ 47
CORRECTION FACTORS‑ 49
Height Correctiion Factors‑ 49
OPERATION‑ 52
Display Panel‑ 52
Cassette Remote Control‑ 53
Button Identication‑ 53
Batteries‑ 54
Operation Modes‑ 55
Airow direction Control‑ 56
Smart Mode‑ 57
46°Heat Mode‑ 58
Timer Mode‑ 59
Clock Button‑ 60
Sleep Mode‑ 61
Indoor Unit Control Mode‑ 62
Outdoor Unit Control Mode‑ 64
Control Logic Description‑ 65
INSTALLATION‑ 69
Outdoor Units‑ 69

3 PB
TABLE OF CONTENTS
Leak Check, Evacuation, and Charging (Triple Evacuation)‑ 71
Field Settings (ESP Setting) Duct Type Only‑ 73
Field Settings (Indoor Unit Parameter Revision)‑ 74
Field Settings (Queery by 7 segment display)‑ 77
Field Settings (Function Settings)‑ 79
INSTALLATION‑ 80
Field Settings Outdoor Unit Dip Switch‑ 80
Checklist‑ 81
Operation Test‑ 82
Cassette and Ducted Condensate Pump Drain Line‑ 82
Fresh Air Intake‑ 83
R‑410A SEALED SYSTEM REPAIR‑ 84
Service Valves Appearance‑ 84
Pumping Down‑ 85
Gas Charging (After Repair)‑ 86
Replace 9‑18k Outdoor unit Compressor and Motor‑ 87
Replace 24k Outdoor unit Compressor and Motor‑ 88
Replace 36k Outdoor unit Compressor and Motor‑ 89
Replace 9k and 12k Duct Type unit Compressor and Motor‑ 90
Replace 18k Duct Type unit Compressor and Motor‑ 91
Replace 24k Duct Type unit Compressor and Motor‑ 92
Replace 36k Duct Type unit Compressor and Motor‑ 93
Replace 9k, 12k, and18k Cassette Type unit Compressor and Motor‑ 94
Replace 9k, 12k, and18k Cassette Type unit Compressor and Motor‑ 95
Replace 9k, 12k, and18k Cassette Type unit Compressor and Motor‑ 96
Replace 24k and 36k Cassette Compressor and Motor Type unit Compressor and Motor‑ 97
TROUBLESHOOTING‑ 98
9‑18k Outdoor Unit‑ 100
24‑36k Outdoor Units‑ 101
Outdoor Unit Fault Code‑ 103
Indoor Unit Fault Codes ‑ 106
Drive fault code (3.0/3.5HP) ‑ 110
Drive Fault Code (24K/36K)‑ 111
E36 Fault Code‑ 113
COMPONENTS TESTING ‑ 115
Indoor Unit Fan Motor‑ 115
Compressor‑ 116
EEV Stepper Coil‑ 119
Check Refrigerant System‑ 120
Test System Flow‑ 121
Check Fuse and Capacitor‑ 122
9‑18k Ducted Control Board ‑ 123
24‑36k Ducted units and 9‑36k Cassettes Control Board‑ 124
9‑12k Outdoor Unit Control Board‑ 125
18k Outdoor Unit Control Board‑ 126
24k Outdoor Unit Control Board‑ 127
36k Outdoor Unit Control Board‑ 128
24‑36k Outdoor Unit Drive Board‑ 129
WIRING DIAGRAMS‑ 130
Ducted Indoor Units 9k, 12k, and 18k‑ 130
Ducted Indoor Units 24‑36k‑ 131
9k‑36k Indoor Cassette Units‑ 132
9‑18k Outdoor Units‑ 133

4 PB
TABLE OF CONTENTS
24k Outdoor Units‑ 134
36k Outdoor Units‑ 135
PARTS CATALOG‑ 136
Introduction‑ 136
9K Outdoor Condensor‑ 137
12K Outdoor Condensor‑ 142
18K Outdoor Condensor‑ 147
24K Outdoor Condensor‑ 152
36K Outdoor Condensor‑ 157
9K, 12K Indoor Cassette‑ 162
18K Indoor Cassette‑ 164
24K Indoor Cassette‑ 166
36K Indoor Cassette‑ 168
9K, 12K, Ducted Indoor‑ 170
18K Ducted Indoor‑ 174
24k Ducted Indoor‑ 178
36k Ducted Indoor‑ 182
APPENDIX‑ 186
Appendix 1: Reference Sheet of Celsius and Farenheit‑ 186
Appendix 2: Pipe Expanding Method‑ 187
Appendix 3 Resistance Table Of Outdoor Compressor Discharge Temperature‑ 188
Appendix 4 Ambient Air Sensor Indoor And Outdoor Unit ‑ 191
ACCESSORIES‑ 194
LIMITED WARRANTY‑ 195
CUSTOMER SATISFACTION and QUALITY ASSURANCE‑ 196
FRIEDRICH AUTHORIZED PARTS DEPOTS‑ 196

5 PB
INTRODUCTION
The information in this manual is intended for use by a qualified technician who is familiar with the safety procedures
required for installation and repair, and who is equipped with the proper tools and test instruments required to service
this product.
Installation or repairs made by unqualified persons can result in subjecting the unqualified person making such repairs
as well as the persons being served by the equipment to hazards resulting in injury or electrical shock which can be
serious or even fatal.
Safety warnings have been placed throughout this manual to alert you to potential hazards that may be encountered. If
you install or perform service on equipment, it is your responsibility to read and obey these warnings to guard against
any bodily injury or property damage which may result to you or others.
Important Safety Information
Your safety and the safety of others is very
important.
We have provided many important safety messages in this manual and on your appliance. Always read
and obey all safety messages.
This is a safety Alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol with the word “WARNING”
or “CAUTION”. These words mean:
Indicates a hazard which, if not avoided, can result in severe personal
injury or death and damage to product or other property.
Indicates a hazard which, if not avoided, can result in personal injury and
damage to product or other property.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of
injury, and tell you what will happen if the instructions are not followed.
Indicates property damage can occur if instructions are not followed.
WARNING
NOTICE
CAUTION
WARNING
Refrigeration system
under high pressure
Do not puncture, heat, expose to flame or
incinerate.
Only certified refrigeration technicians should
service this equipment.
R410A systems operate at higher pressures
than R22 equipment. Appropriate safe service
and handling practices must be used.
Only use gauge sets designed for use with
R410A.
Do not use standard R22 gauge sets.

6 PB
Important Safety Information INTRODUCTION
WARNING
Please read this manual thoroughly prior to equipment
installation or operation. It is the installer’s responsibility
to properly apply and install the equipment. Installation
must be in conformance with the NFPA 70-2008 National
Electric Code or current edition, International Mechanic
code 2009 or current edition and any other applicable local
or national codes.
WARNING
Refrigeration system under high pressure. Do not
puncture, heat, expose to flame or incinerate. Only certified
refrigeration technicians should service this equipment.
R410A systems operate at higher pressures than R22
equipment. Appropriate safe service and handling practices
must be used. Only use gauge sets designed for use with
R410A. Do not use R22 gauge sets. Failure to do so can
result in property damage, personal injury, or death.
WARNING
Electrical shock hazard.
Turn OFF electric power before service or installation.
Unit must be properly grounded.
Unit must have correct fuse or circuit breaker
protection. Unit’s supply circuit must have the correct
wire conductor size. All electrical connections and
wiring must be installed by a qualified electrician and
conform to the National Electrical Code and all local
codes which have jurisdiction. Failure to do so can
result in property
damage, personal injury and/or death.
Your safety and the safety of others are very
important.
We have provided many important safety messages in
this manual and on your appliance. Always read and
obey all safety messages.
This is the safety Alert symbol.
This symbol alerts you to potential
hazards that can kill or hurt you
and others.
All safety messages will follow the
safety alert symbol with the word
“WARNING” or “CAUTION”.
These words mean:
Indicates a hazard which, if not avoided, can result in
severe personal injury or death and damage to product or other
property.
Indicates a hazard which, if not avoided, can result in
personal injury and damage to product or other property. All
safety messages will tell you how to reduce the chance of
injury, and tell you what will happen if the instructions are not
followed.
Indicates property damage can occur if instructions
are not followed.
Indicates property damage can occur if instructions
are not followed.
WARNING
CAUTION
NOTICE
To ensure proper operation, Friedrich requires that all equipment is not operated during active construction phases. This includes active stages of
completing framing, drywalling, spackling, sanding, painting, flooring, and moulding in the equipment’s designated conditioning space. The use of
this equipment during construction could result in premature failure of the components and/or system and is in violation of our standard warranty
guidelines. The operation of newly installed equipment during construction will accelerate the commencement and/or termination of the warranty
period.
CAUTION
DO NOT OPERATE EQUIPMENT DURING ACTIVE STAGES OF CONSTRUCTION

7 PB
INTRODUCTION
Personal Injury Or Death Hazards
ELECTRICAL HAZARDS:
• Shutdown and/or disconnect all electrical power to the unit before performing inspections, maintenance, or
service.
• Make sure to follow proper lockout/tag out procedures.
• Always work in the company of a qualied assistant if possible.
• Capacitors, even when disconnected from the electrical power source, retain an electrical charge potential
capable of causing electric shock or electrocution. Wait a few minutes after shutdown to allow the capacitors to
discharge the stored energy.
• Handle, discharge, and test capacitors according to safe, established, standards, and approved procedures.
• Extreme care, proper judgment, and safety procedures must be exercised if it becomes necessary to test or
troubleshoot equipment with the power turned on to the unit.
• Do not spray water on the air conditioning unit while the power is on.
• Electrical component malfunction caused by water could result in electric shock or other electrically unsafe
conditions when the power is restored and the unit is turned on, even after the exterior is dry.
• Use air conditioner on a single dedicated circuit within the specied amperage rating.
• Ensure the unit that the unit is properly grounded.
• Do not cut or modify the power supply cord or remove the ground prong of the plug.
• Never operate the unit on an extension cord.
• Follow all safety precautions and use approved protective safety equipment such as: gloves, goggles, and
clothing. Ensure that properly insulated tools, and testing equipment are are used as well to protect against
equipment damage and reduce the risk of injury.
• Failure to follow proper safety procedures and these warnings can result in serious injury or possibly death.
SAFETY
FIRST
WARNING AVERTISSEMENT
ADVERTENCIA
Do not remove, disable or
bypass this unit’s safety
devices. Doing so may
cause fire, Doing so may
cause fire, injuries, or
death.
Ne pas supprime, désactiver ou
contourner cette l´unité des
dispositifs de sécurité, faire vous
risqueriez de provoquer le feu, les
blessures ou la mort.
No eliminar, desactivar o
pasar por alto los dispositivos
de seguridad de la unidad. Si
lo hace podría producirse
fuego, lesiones o muerte.

8 PB
INTRODUCTION
Model Identification Guide
FP HS W 09
A1A- A
Model Type:
FR- Floating Air Premier
FP - Floating Air Pro
FS- F loating Air Sele ct
Application :
W- Wallmounted
D- Ducted (Insider)
C- Cassette
R- Remo te Condense r
Function :
HS – H ea t Pump Single
HM – Heat Pump Multi
HF – Heat Pump F lex Single and
Multizon e
Coolin g
BTU/HR
Model
Approximate
Introductory
Chara cter:
Voltag e
A- 201 9
B- 202 0
C- 202 1
D- 202 2
1- 115 Volts
3- 230 Volts
MODEL IDENTIFICATION GUIDE
Marketing Suffix :
Letter indicates modification to existing mode l
Figure 101

9 PB
INTRODUCTION
Product Appearance - Ducted and Cassette
Model
(Btu/h)
Duct type
Indoor Unit
9K/12K
18K
Model
(Btu/h) Indoor Unit
9K/12K
18K/ 24k
Cassette type
Figure 102
Figure 103

10 PB
INTRODUCTION
Product Appearance- Outdoor Units
Figure 104

11 PB
SPECIFICATIONS
Product Specifications Single-Zone-Cassette
PERFORMANCE RATINGS 9k 12k 18k 24k 36k
INDOOR MODEL FPHFC09A3A
FPHFC09A3B Wi-Fi
FPHFC12A3A
FPHFC12A3B Wi-Fi
FPHFC18A3A
FPHFC18A3B Wi-Fi
FPHFC24A3A
FPHFC24A3B Wi-Fi FPHSC36A3B Wi-Fi
OUTDOOR MODEL FPHFR09A3A FPHFR12A3A FPHFR18A3A FPHFR24A3A FPHFR36A3A
SPECIFICATIONS
CAPACITY COOLING (RATED) Btu 9000 12000 18000 24000 36000
CAPACITY COOLING (MIN~MAX) Btu 4850-11600 5800-13100 8000-19200 8600-25200 12600-36800
CAPACITY HEATING @47F
(RATED) Btu 9000 12000 11942 24000 42600
CAPACITY HEATING @17F
(RATED) Btu 5120 6800 7500 19600 27300
CAPACITY HEATING (MIN~MAX) Btu 4340-12280 6000-14400 7000-21200 7600-28400 15000-42600
SENSIBLE HEAT RATIO 76% 77% 76% 76% 79%
COP (@47°F) 4.00 3.80 3.90 3.61 3.31
SEER 18 19 19 19 19.5
EER 12.5 12.5 12.7 12.5 10.6
HSPF 10.00 10.00 10.00 10.00 10.50
MOISTURE REMOVAL Pts/h 2 3 5 5.1 7.61
AIRFLOW (LOW, MED, HIGH ) CFM 235/285/309 235/294/353 380/457/588 400/530/647 676/794/941
SOUND RATING - INDOOR H/M/L dB(A) 40/33/28 35/32/29 38/35/33 43/39/36 49/43/39
SOUND RATING - OUTDOOR dB(A) 52 54 68 54 61
OPERATING RANGE (COOLING) °F 5-118 5-118 5-118 -4-118 -4-118
OPERATING RANGE (HEATING) °F -4-75 -4-75 -4-75 -4-75 -4-75
ELECTRICAL DATA
POWER SOURCE V, Ø, Hz 208-230/60/1 208-230/60/1 208-230/60/1 208-230/60/1 208-230/60/1
POWER AND COMMUNICATION
CABLE TYPE 14/4 AWG 600V THHN
14/4 AWG
600V THHN
14/4 AWG
600V THHN
14/4 AWG
600V THHN
14/4 AWG
600V THHN
MINIMUM AMPACITY A 23 23 23 23 27
COOLING WATTS W 720 960 1420 1920 3380
COOLING AMPS A 3.6 4.3 6.3 8.6 14.6
HEATING AMPS A 3.5 4.1 6.5 8.7 14.0
MAX. TD FUSE/BREAKER A 20 30 30 30 50
REFRIGERATION SYSTEM
REFRIGERANT R410a R410a R410a R410a R410a
COMPRESSOR TYPE Rotary Rotary Rotary Rotary Rotary
CONNECTIONS Flare Flare Flare Flare Flare
LIQUID LINE O.D. in 1/4 1/4 1/4 3/8 3/8
SUCTION LINE O.D. in 3/8 3/8 1/2 5/8 3/4
FACTORY PRECHARGE ft 25 25 25 25 25
REFRIGERANT CHARGE oz 33.5 45.9 56.5 75.3 111
MIN./MAX. LINE LENGTH ft 10-82 10-82 10-98 25-164 25-164
MAX. HEIGHT DIFFERENCE ft 33 49 49 98 98
Figure 201

12 PB
SPECIFICATIONS
Product Specifications Single-Zone Concealed Ducted
PERFORMANCE RATINGS 9k 12k 18k 24k 36k
INDOOR MODEL FPHFD09A3A FPHFD12A3A FPHFD18A3A FPHFD24A3A FPHSD36A3A
OUTDOOR MODEL FPHFR09A3A FPHFR12A3A FPHFR18A3A FPHFR24A3A FPHFR36A3A
SPECIFICATIONS
CAPACITY COOLING (RATED) Btu 9000 12000 18000 24000 36000
CAPACITY COOLING (MIN~MAX) Btu 4850-11600 5800-13100 8000-19200 8600-25200 12600-36800
CAPACITY HEATING @470F
(RATED) Btu 9000 12000 18000 24000 36000
CAPACITY HEATING @170F
(RATED) Btu 6200 8200 14700 19600 22000
CAPACITY HEATING (MIN~MAX) Btu 4340-12280 6000-14400 7000-21200 7600-28400 15000-42600
SENSIBLE HEAT RATIO 76% 76% 76% 76% 76%
COP (@47°F) 3.2 3.2 3.4 3.6 3
SEER 17 19 19 18 18
EER 12 11 12.2 12.5 10.9
HSPF 10.00 10.00 10.00 10.00 9.50
MOISTURE REMOVAL Pts/h 2 3 5 5.1 7.61
AIRFLOW (LOW, MED, HIGH ) CFM 235/285/309 235/285/338 370/440/529 501/574/647 618/735/853
SOUND RATING - INDOOR H/M/L dB(A) 29/27/26 36/33/30 38/35/33 38/36/34 49/43/39
SOUND RATING - OUTDOOR dB(A) 52 54 68 54 61
OPERATING RANGE (COOLING) °F 5-118 5-118 5-118 -4-118 -4-118
OPERATING RANGE (HEATING) °F -4-75 -4-75 -4-75 -4-75 -4.75
ELECTRICAL DATA
POWER SOURCE V, Ø, Hz 208-230/60/1 208-230/60/1 208-230/60/1 208-230/60/1 208-230/60/1
POWER AND COMMUNICATION
CABLE TYPE 14/4 AWG 600V THHN
14/4 AWG
600V THHN
14/4 AWG
600V THHN
14/4 AWG
600V THHN
14/4 AWG
600V THHN
MINIMUM AMPACITY A 23.0 23.0 23.0 23.0 4.6
COOLING WATTS W 750 1091 1610 2200 3300
COOLING AMPS A 3.7 4.8 7.0 8.6 14.4
HEATING AMPS A 4.1 4.8 7.3 8.7 15.2
MAX. TD FUSE/BREAKER A 20 30 30 30 50
REFRIGERATION SYSTEM
REFRIGERANT R410a R410a R410a R410a R410a
COMPRESSOR TYPE Rotary Rotary Rotary Rotary Rotary
CONNECTIONS Flare Flare Flare Flare Flare
LIQUID LINE O.D. in 1/4 1/4 1/4 3/8 3/8
SUCTION LINE O.D. in 3/8 3/8 1/2 5/8 3/4
FACTORY PRECHARGE ft 25 25 25 25 25
REFRIGERANT CHARGE oz 33.5 45.9 56.5 75.3 111
MIN./MAX. LINE LENGTH ft 10-82 10-82 10-98 25-164 25-164
MAX. HEIGHT DIFFERENCE ft 33 49 49 98 98
Figure 202

13 PB
SPECIFICATIONS
Product Dimensions: 9k, 12k, and 18k Ducted Indoor Units
Air outlet
Gas pipe
Air inlet
Liquid pipe
Drain pipe
Air outlet
Electric box
Air inlet
a b c d
9K/12K 37- 13/16
(961)
Model
( Btu/h)
18K
7-1/12(190)
6-11/16(170)
3-7/8(98)
3-3/8 (85)
1-3/8(35)
8-3/4(222)
6-11/16(170)
5(127)
5-1/4(134)
5-3/16(131)
14-3/4(375)
17-5/8(447)
6-1/2(165)
35- 13/16
(910)
29-1/2
(749)
30
(786)
48-7/16
(1231)
46-7/16
(1180)
40-1/8
(1019)
41- 5/8
(1056)
Unit: Inches “ (mm)
Figure 203

14 PB
SPECIFICATIONS
Product Dimensions: 24k Ducted Indoor Units
Model
Unit: Inches”(mm)
Figure 204

15 PB
SPECIFICATIONS
Product Dimensions: 9k and 12k Cassette
2-1/16(52)
2-7/16
(62) 22-7/16(570)
24-7/16(620)
24-7/16(620)
2(51)
3-11/16
(93)
12(305)
10-13/16(275)
12-11/16(323)
24-7/16(620)
20-7/8(530)
20-1/4(515)
24-7/16(620)
22-5 /8~23-1/4(575~590)
22-5/8~23-1/4(575~590)
5-7/16
(138)
5-1/16 (128)
1-5/8
(41)
(131)
3-1/8
(79)
5-3/16
8-7/16 (215)
1-7/8(48)
Unit: Inches “ (mm)
Figure 205

16 PB
SPECIFICATIONS
Product Dimensions: 18-36k Cassette
9-3/4(248)
33-1/16(840)
37- 3/8(95 0)
(490 )
(478 )
(520 )
37-3/8(950)
33-7/8~35-13/16(860~910)
29-7/8(760)
)29-7/8(760
33-7/8~35-13/16(860~910)
33-1/8(841)
5 (127)
4-1/32(102)
4-5/16
(110)
7-1/8
(180) 5-1/8
(130)
(45 )
4-5/8 (118)
4-1/32 (102)
Unit: Inches “ (mm)
Figure 206

17 PB
SPECIFICATIONS
Product Dimensions: 9-12k Outdoor Units
11(250)
Inches “(mm)
Figure 207

18 PB
SPECIFICATIONS
Product Dimensions: 18k Outdoor Units
Inches “(mm)
Figure 208

19 PB
SPECIFICATIONS
Product Dimensions: 24k Outdoor Units
7(180)
4-5/16(110)10-1/4(260)=5X2-1 /16(52)
33-1/16(840)
7-1/4(185) 22- 7/8(580)
37- 3/8(950)
40- 7/8(1032)
3-1/4(82)
13- 9/16(344)
16-1/4(414)
14-15/16(380)
13-3/8(340)
1-5/8(41)
2-3/4(70)
5/8(15)
Unit: Inches “ (mm)
Figure 209

20 PB
SPECIFICATIONS
Product Dimensions: 36k Outdoor Units
4
Inches “ (mm)
Figure 210