Fuji Xerox DocuPrint M228 z User manual

Unpack the machine and check the components
Read the Safety Guide first, then read this Quick Setup Guide for the correct installation
procedure.
NOTE:
• The available connection interfaces vary depending on the model.
• The illustrations in this Quick Setup Guide are based on the DocuPrint M268 z.
• The USB cable is a standard accessory.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or
100BASE-TX Fast Ethernet Network.
Remove the packing materials and install the toner cartridge
Load paper in the paper tray
Connect the power cord and turn on the machine
Configure the machine for faxing (for DocuPrint M228 fb / DocuPrint M228 z / DocuPrint M268 z)
If you do not plan to use the fax feature on this machine, go to step 5.
A
Drum Unit
(Pre-installed)
USB Interface Cable Quick Setup Guide CD‑ROM
B
(For DocuPrint M228 fb /
DocuPrint M228 z /
DocuPrint M268 z)
Inbox Toner
Cartridge
Telephone Line Cord
(For DocuPrint M228 fb /
DocuPrint M228 z /
DocuPrint M268 z)
Safety Guide Basic User's Guide
Connect the telephone line cord
A
B
B
A
A
B
3
4
2
1
Adjust the paper guides.
NOTE:
• To complete fax setup on your machine, see the Basic User's Guide.
• Your machine is programmed to automatically receive faxes. To change this default mode, see the Basic User's Guide.
Remove the orange part. Remove the orange part.
Insert the paper with the print side face-up.
Quick Setup Guide
DocuPrint M228 b / DocuPrint M228 db / DocuPrint M228 fb /
DocuPrint M228 z / DocuPrint M268 dw / DocuPrint M268 z
ME7183E3-1 (Edition 1)
October 2014
Copyright © 2014 by Fuji Xerox Co., Ltd.
Fuji Xerox Co., Ltd.

Configuration using the CD-ROM (Windows®)
Follow the on-screen instructions to continue installation until
either the Connect the machine or the Connection Type
screen appears.
Finish
5A
Download the full driver and software package by visiting the Fuji Xerox website at http://www.fujixeroxprinters.com/.
After you download the driver and software package, follow the on-screen instructions until either the Connect the machine or the Connection Type screen appears. Refer to
5A Configuration using the CD-ROM (Windows®).
For USB Connection
For Wired Network Connection
Connect a network cable first.
Follow the on-screen
instructions to continue
installation.
Configuration without using the CD-ROM (Windows®without CD-ROM drive or Macintosh)
5B
NOTE:
If the Fuji Xerox screen does not appear
automatically, go to Computer.
(For Windows®8: click the (File Explorer)
icon on the taskbar, and then go to Computer.)
Double-click the CD-ROM icon, and then double-
click start.exe.
(DocuPrint M228 b / DocuPrint M228 db /
DocuPrint M228 fb / DocuPrint M228 z)
Connect the machine
(DocuPrint M268 dw / DocuPrint M268 z)
Connection Type
If your wireless LAN access point/router supports automatic wireless (one-push) setup (WPS/AOSS™), you can set up your machine without using a computer.
One-push wireless setup for mobile devices (Wireless models only)
5C
Press the WPS or AOSS™ button on your
wireless LAN access point/router.
Press the WiFi button on your machine.
Wireless setup is now complete.
Wireless Network Connection
[Recommended]
Select this option if you have a USB cable to
use temporarily for wireless setup.
Select this option if you do not have a USB cable.
Follow the on-screen
instructions to continue
installation.
Finish
Finish
Follow the on-screen
instructions to continue
installation.
For Wireless Network Connection
We recommend preparing a USB cable
to use temporarily during the wireless
setup.