FujiFilm Drypix 5000 User manual

DRYPIX 5000
Operation Manual
8th Edition: July 2008
897N0316F (006-240-70)
This Operation Manual describes details on how to operate the
DRYPIX 5000 and cautions to be observed when operating it. Please
read the Operation Manual thoroughly before actually operating the
DRYPIX 5000 system. After reading this manual, store it nearby the
DRYPIX 5000 so that you can see it whenever necessary.

ii 006-240-70 2008.07
Introduction
Thank you for purchasing the Fuji Medical Dry Laser Imager DRYPIX 5000.
This operation manual for the DRYPIX 5000 provides detailed explanations of operation methods
and cautions to promote proper understanding of functions and more effective usage.
We ask that first-time users read this manual thoroughly before actually using the DRYPIX 5000.
After reading this manual, please store it nearby the DRYPIX 5000 so that it may be used to
ensure that the machine is used under the best conditions.
Installation may only be conducted by authorized service personnel.
Process waste correctly, as stipulated by local law or any regulations that apply.
When discarding the DRYPIX 5000 that incorporates the lithium battery, be sure to contact service
engineer because it cannot be disposed of as a general waste.
This system is classified as a medical device under EC Directive 93/42/EEC.
This equipment has been designed on the assumption that the patient would not come into direct
contact with it or for operation by appropriately trained operator.
The LCD display lamps in this product contain mercury, which must be recycled or disposed of in
accordance with local, state, or federal laws.
Caution: Rx Only (Federal law restricts this device to sale by or on the order of a physician.)
The DRYPIX 5000 uses Vx Works.
Copyright of Vx Works belongs to Wind River Systems,Inc.
Trademark
FCR is a trademark or a registered trademark of FUJIFILM Corporation.
Copyright Reserved
Windows®NT is the registered trademark of US Microsoft Corporation in the U. S. A. and other countries.
Windows®XP is the registered trademark of US Microsoft Corporation in the U. S. A. and other countries.
Windows®is the registered trademark of US Microsoft Corporation in the U. S. A. and other countries.
All other company names and product names described in this manual are the trademarks or registered
trademarks of their respective holders.
Copyright © 2003-2008 FUJIFILM Corporation. All rights reserved.
1 No part or all of this manual may be reproduced in any form without prior permission.
2 The information contained in this manual may be subject to change without prior notice.
3 FUJIFILM Corporation shall not be liable for malfunctions and damages resulting from installation,
relocation, remodeling, maintenance, and repair performed by other than dealers specified by
FUJIFILM Corporation.
4 FUJIFILM Corporation shall not be liable for malfunctions and damage of FUJIFILM Corporation
products due to products of other manufacturers not supplied by FUJIFILM Corporation.
5 FUJIFILM Corporation shall not be liable for malfunctions and damage resulting from remodeling,
maintenance, and repair using repair parts other than those specified by FUJIFILM Corporation.
6 FUJIFILM Corporation shall not be liable for malfunctions and damage resulting from negligence
of precautions and operating methods contained in this manual.
7 FUJIFILM Corporation shall not be liable for malfunctions and damage resulting from use under
environment conditions outside the range for this product, such as power supply, installation
environment, etc., contained in this manual.
8 FUJIFILM Corporation shall not be liable for malfunctions and damage resulting from natural
disasters such as fires, earthquakes, floods, lightning, etc.
CAUTIONS
This Operation Manual is applicable to software versions V13.0/V7.0.
(V13.0 is for Windows XP and V7.0 is for Windows NT.)

iii
006-240-20 2004.03
Chapter 1 Introduction
Chapter 2 System Overview
Chapter 3 Basic Operation
Chapter 4 Utility Operation
Chapter 5 Troubleshooting
Chapter 6 Regular Care and Maintenance
Chapter 7 Specifications
Contents at a Glance
1
2
3
4
5
6
7

iv 006-240-60 2007.03
Contents
Contents
Chapter 1 Introduction
1.1 What is the DRYPIX 5000? ..................................................................................... 1-2
1.2 System Features ..................................................................................................... 1-2
1.3 Safety ..................................................................................................................... 1-3
1.4 Operational Precautions .......................................................................................... 1-4
1.4.1 Laser Handling Precautions .......................................................................... 1-4
1.4.2 Preventing Electric Shock ............................................................................. 1-4
1.4.3 Ventilation Precautions ................................................................................. 1-4
1.4.4 Handling Precautions.................................................................................... 1-4
1.5 Electromagnetic Compatibility (EMC) ...................................................................... 1-5
1.5.1 Classification ................................................................................................ 1-5
1.6 Precautions for Storing or Handling the DI-HL, DI-HLc, and DI-ML Films for
the Fuji Medical Dry Laser Imager ........................................................................... 1-6
1.6.1 Precautions for Storing or Handling Unused Films ........................................ 1-6
1.6.2 Precautions for Storing or Handling Recorded Films ..................................... 1-6
1.6.3 Other ............................................................................................................ 1-6
1.7 Other Precautions for Using the Equipment ............................................................ 1-7
1.7.1 Precautions for Inserting the Shutter ............................................................. 1-7
1.8 Location of Each Label ........................................................................................... 1-8
Chapter 2 System Overview
2.1 System Configuration ............................................................................................. 2-2
2.2 Hardware Configuration .......................................................................................... 2-3
[1] DRYPIX 5000 Main Unit ..................................................................................... 2-3
[2] Operation Panel ................................................................................................. 2-5
Chapter 3 Basic Operation
3.1 Routine Operations ................................................................................................. 3-2
Starting Up the System ............................................................................ 3-3
Reading (Storing) Images ......................................................................... 3-5
Printing Images (film output) ..................................................................... 3-5
Shutting Down the System ...................................................................... 3-6
3.2 Supplying Film (Replacing the Film Pack) ................................................................ 3-7
3.3 Urgent Print ............................................................................................................ 3-13
3.4 Deleting a Print Job ................................................................................................ 3-14
3.5 Print Job Details ..................................................................................................... 3-16

v
006-240-60 2007.03
Chapter 4 Utility Operation
4.1 What is Utility? ........................................................................................................ 4-2
4.2 Starting Up and Quitting the Utility .......................................................................... 4-3
4.2.1 Starting Up the Utility .................................................................................... 4-3
4.2.2 Quitting the Utility ......................................................................................... 4-3
4.3 Auto F.D.C.............................................................................................................. 4-4
4.4 Test Pattern ............................................................................................................ 4-8
4.5 Unlock Tray ............................................................................................................ 4-12
4.6 Print Queue ............................................................................................................ 4-15
4.7 Set Counters .......................................................................................................... 4-17
4.8 Economy Mode ...................................................................................................... 4-20
4.8.1 Transition Time ............................................................................................. 4-21
4.8.2 Scheduler ..................................................................................................... 4-24
4.8.3 Calendar ....................................................................................................... 4-27
4.8.4 Save Power .................................................................................................. 4-33
4.9 Set Alarm................................................................................................................ 4-35
4.10 Automated F.D.C. .................................................................................................. 4-37
4.11 Set Date/Time ........................................................................................................ 4-38
4.12 Software Version .................................................................................................... 4-40
4.13 Reprint ................................................................................................................... 4-41
4.14 Time Interval Determined for Animation Display ...................................................... 4-45
Chapter 5 Troubleshooting
5.1 Items to be Confirmed First ..................................................................................... 5-2
5.2 Error Window .......................................................................................................... 5-4
5.3 When the Film Jams ............................................................................................... 5-5
5.4 Failing in Reading a Barcode................................................................................... 5-27
5.5 Failing in Loading Films ........................................................................................... 5-30
5.6 Failing in Auto F.D.C. (Automatic Density Calibration) .............................................. 5-34
5.7 Failing in Placing a Cleaning Roller .......................................................................... 5-35
5.8 Storing the Equipment Operation History ................................................................ 5-37
5.9 Failing in Turning the Power Switch OFF After Pressing the SHUTDOWN Button .... 5-38

vi 006-240-60 2007.03
Chapter 6 Regular Care and Maintenance
6.1 Cleaning the Cleaning Roller with Water .................................................................. 6-2
6.2 Cleaning the Suction Filter ...................................................................................... 6-5
Chapter 7 Specifications
1 System Components ................................................................................................. 7-2
1.1 Standard Components ..................................................................................... 7-2
1.2 Options ............................................................................................................ 7-2
1.3 Supplies ........................................................................................................... 7-2
2 Processing Capacity .................................................................................................. 7-2
3 Applicable Film .......................................................................................................... 7-2
4 Recording Pixel Size .................................................................................................. 7-2
5 CR Image Size Reduction .......................................................................................... 7-2
6 Gray Scale ................................................................................................................. 7-2
7 Maximum Density ...................................................................................................... 7-3
8 Power Supply Conditions........................................................................................... 7-3
9 Environmental Conditions .......................................................................................... 7-3
10 External View and Weight .......................................................................................... 7-4
10.1 External Dimensions and Weight ...................................................................... 7-4
10.2 Internal Construction ........................................................................................ 7-5
Maintenance and Inspection
1 User’s Maintenance and Inspection Items
1.1 Daily Inspection
1.2 Periodical Inspection
2 Maintenance and Inspection Items Assigned to Specified Dealer

1-1
006-240-20 2004.03
1
Chapter 1
Introduction

1-2 006-240-40 2006.09
Introduction
1.1 What is the DRYPIX 5000?
The Fuji Medical Dry Laser Imager DRYPIX 5000 is a device that prints digital image data
transferred via the DICOM network from the FCR Image Reader or CT, MRI and other
imaging modalities onto dedicated film in the selected format.
1.2 System Features
The main features of the Fuji Medical Dry Laser Imager DRYPIX 5000 are as follows.
1Water, developer, fixer and other chemicals are completely unnecessary, doing away
with the need for drainage and exhaust facilities and related construction. There is also
no need for space to store chemicals.
2Chemical handling, replenishment, disposal processing and the related time and effort
are not necessary. Moreover, environmental pollution is prevented.
3Film can be handled under daylight room conditions, doing away with the need for
darkrooms.
4You can select blue-base film (DI-HL), clear-base film (DI-HLc), or blue-base film for
mammography use (DI-ML) depending on the intended use. It is possible to determine
type of film that is to be used for each tray.
5Compact size does not limit installation site selection.
Fuji Medical Dry Laser Imager, model DRYPIX 5000 is indicated for use in providing
diagnostic quality medical images on film for aid in physician diagnosis, including the
printing of images and associated identification information from various digital imaging
source modalities, including but not limited to, Computed Tomography (CT), Magnetic
Resonance Imaging (MRI), Ultrasound, Computed Radiography, Digital Radiography, Digital
Mammography and Nuclear Medicine.
Note: For digital Mammography images, the high resolution mode (50 micron recording
pixel size) is used.

1-3
006-240-20 2004.03
Introduction
1-3
1
2
3
4
5
6
7
1.3 Safety
This section contains safety precautions required for the safe operation of this equipment.
Carefully read and follow these precautions before using the equipment.
If these precautions are not followed, injuries or damage to the equipment may occur.
The safety precautions are marked as WARNING or CAUTION, and additional information
“”. The meanings of these precautions are as follows:
WARNING
Indicates hazardous situations that may lead to serious injury or even death if
the precaution is not or could not be followed.
CAUTION
Indicates hazardous situations that may lead to mild or moderate injury if the
precaution is not or cannot be followed. Precautions against accidents causing
only physical damage.
Indicates procedures requiring special attention, instructions that must be fol-
lowed, supplementary explanations, etc.

1-4 006-240-60 2007.03
Introduction
1.4 Operational Precautions
1.4.1 Laser Handling Precautions
DRYPIX 5000 Laser Unit Specifications
Class 3B
Medium Semiconductor laser
Wavelength 660 nm
Maximum Output 50 mW (CW)
WARNING
The DRYPIX 5000 incorporates a Class 3B laser with a maximum output of
50mW.
To prevent exposure to its laser beams, observe the following precautions.
• Never remove the protective covers.
• When opening the outer covers for coping with film jams, be sure to observe
procedures set forth in the Operation Manual.
• Always contact a qualified service engineer immediately if you suspect there
is a malfunction.
CAUTION
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
1.4.2 Preventing Electric Shock
WARNING
The power supply to the DRYPIX 5000 is AC100/110/120V.
To avoid possible electrical shock, users should observe the following precau-
tions.
• Avoid installation sites where water may splash on the equipment.
• Make sure that the equipment is properly grounded to a protective earth lead
for indoor wiring.
• Make sure that all cable connections have been properly connected.
WARNING
Inside the DRYPIX 5000 are parts through which a high voltage is conducted,
putting the user at risk for electric shock. Never remove any covers other than
the eject and front covers.
1.4.3 Ventilation Precautions
CAUTION
Be sure to install this equipment in a well-ventilated environment.
Good ventilation must attend its use (at least 54m3/hour for one unit).
1.4.4 Handling Precautions
CAUTION
If the room temperature increases abruptly when the equipment is cold, dew
condensation may occur. Exercise care so that dew condensation does not
occur because it may cause the equipment to be damaged.