Fujitsu ART90 Series User manual

OPERATING MANUAL
ART90 Series
AIR CONDITIONER
DUCT TYPE
SU MO TU WE TH FR SA
AM
PM
369 12 15 18 21
KEEP THIS OPERATION MANUAL
FOR FUTURE REFERENCE
P/N9365350034
9365350034_Cover 4/25/05, 1:47 PM1

1
SAFETY PRECAUTIONS
●Before using the appliance, read these “PRECAUTIONS” thoroughly and operate in the correct way.
●The instructions in this section all relate to safety; be sure to maintain save operating conditions.
●“DANGER”, “WARNING” and “CAUTION” have the following meanings in these instructions:
CONTENTS
SAFETY PRECAUTIONS ................................................ 1
NAME OF PARTS ........................................................... 2
PREPARATORY OPERATION ......................................... 3
OPERATION ................................................................... 3
TIMER FUNCTIONS ....................................................... 5
ON/OFF TIMER ............................................................... 5
WEEKLY TIMER ............................................................. 6
TEMPERATURE SET BACK TIMER ............................... 8
OPERATING TIPS ........................................................... 9
CARE AND MAINTENANCE........................................ 10
SELF-DIAGNOSIS ........................................................ 10
TROUBLESHOOTING .................................................. 11
TEMPERATURE AND HUMIDITY RANGE .................. 12
DANGER!
●Do not attempt to install this air conditioner by yourself.
●This unit contains no user-serviceable parts. Always consult authorized service personnel for repairs.
●When moving, consult authorized service personnel for disconnection and installation of the unit.
●Do not become over-exposed to cold air by staying in the direct path of the air flow of the air conditioner for
extended periods of time.
●Do not insert fingers or objects into the outlet port or intake grilles.
●Do not start and stop air conditioner operation by turning off the electrical breaker and so on.
●In the event of a malfunction (burning smell, etc.), immediately stop operation, turn off the electrical breaker,
and consult authorized service personnel.
CAUTION!
●Provide occasional ventilation during use.
●Do not direct air flow at fireplaces or heating apparatus.
●Do not climb on, or place objects on the air conditioner.
●Do not expose the air conditioner directly to water.
●Do not operate the air conditioner with wet hands.
●Turn off power source when not using the unit for extended periods.
●Always turn off the electrical breaker whenever cleaning the air conditioner or changing the air filter.
●Connection valves become hot during heating; handle with care.
●Check the condition of the installation stand for damage.
●Do not place animals or plants in the direct path of the air flow.
●When restarting after a long period of disuse in the winter, do:
Turn the power switch on at least 12 hours before starting the unit.
●Do not drink the water drained from the air conditioner.
●Do not use in applications involving the storage of foods, plants or animals, precision equipment, or art
works.
●Do not apply any heavy pressure to radiator fins.
●Operate only with air filters installed.
●Do not block or cover the intake grille and outlet port.
●Ensure that any electronic equipment is at least one metre away from either the indoor or outdoor units.
●Avoid installing the air conditioner near a fireplace or other heating apparatus.
●When installing the indoor and outdoor unit, take precautions to prevent access to infants.
●Do not use inflammable gases near the air conditioner.
WARNING!
CAUTION!
DANGER! This mark indicates procedures which, if improperly performed, are most likely to re-
sult in the death of or serious injury to the user or service personnel.
This mark indicates procedures which, if improperly performed, might lead to the death
or serious injury of the user.
This mark indicates procedures which, if improperly performed, might possibly result
in personal harm to the user, or damage to property.
9365350034_P1-P15 4/25/05, 1:48 PM1

2
NAME OF PARTS
Fig. 2 Outdoor Unit
Fig. 3 Remote controller
Start/Stop Button
Set Temperature Button
Master Control Button
Fan Control Button
THERMO SENSOR Button
ENERGY SAVE Button
Timer Mode (CLOCK ADJUST)
Button
DAY (DAY OFF) Button
SET BACK Button
Set Time Button
DELETE Button
DAY OFF
DELETE SET
ENERGY
SAVE THERMO SENSOR
SET BACK
DAY
CLOCK ADJUST
SU MO TU WE TH FR SA
369 12 15 18 21
SET Button
Operation Lamp
Timer and Clock Display
Operation Mode Display
Fan Speed Display
Operation Lock Display
Temperature Display
Function Display
Defrost Display
Thermo Sensor Display
Energy Save Display
Fig. 1 Indoor Unit
Air intake
Air outlet
Air intake
Outlet port
Intake port
Drain pipe
(Main)
Drain pipe
(safet
y
)
●Install this with the power
supply chain during on-site
installation.
Electrical Breaker
9365350034_P1-P15 4/25/05, 1:48 PM2

3
PREPARATORY OPERATION
To set the operation mode
● Operation mode setting
● Room temperature setting
● Fan speed setting
OPERATION
Instructions relating to heating are applicable only to “HEAT & COOL MODEL”(Reverse Cycle).
To start/stop operation
CLOCK ADJUST
Press the timer mode (CLOCK
ADJUST) button for 2 seconds
or more. The time display on
the remote controller will flash.
2
DAY OFF
DAY
SU MO TU WE TH FR SA
Press the DAY button and select the current day.
A appears around the selected day.
Press the set time buttons to set the current time.
Press repeatedly to adjust the current time in 1-
minute increments. Press and hold to adjust the
current time in 10-minute increments.
ex. Monday 10:00
Press again to end.
CLOCK ADJUST
SU MO TU WE TH FR SA
1
34
AUTO COOL DRY HEATFAN
Lower Raise
Temperature setting range
AUTO ............................................... 18 to 30 °C
COOL/DRY ....................................... 18 to 30 °C
HEAT ................................................ 16 to 30 °C
Operation lamp
Air conditioner ON: Lit brightly
Air conditioner OFF: Not lit
Press the start/stop button.
Press the master control button to set the operation mode.
If DRY is selected, the fan speed will be set to AUTO.
Press the set temperature buttons to set the room temperature.
Follow the instruction in the "CUTTING THE JUMPER LINE" section of the IN-
STALLATION INSTRUCTION SHEET and change the Fan speed display.
Set the current day and time
9365350034_P1-P15 4/25/05, 1:48 PM3

4
OPERATION
Press the ENERGY SAVE button to start or stop the energy-sav-
ing air conditioner operation.
For details on the function, refer to page 9.
ENERGY
SAVE
THERMO
SENSOR
Child lock function
DAY OFF
DELETE SET
SET BACK
DAY
CLOCK ADJUST
Press the DAY (DAY OFF) button and SET button simulta-
neously for 2 seconds or more to activate the child lock
function and lock all buttons on the remote controller.
Press the buttons again for 2 seconds or more to deacti-
vate the child lock function.
When the child lock function is activated, the mark
appears. If any button is pressed during the child lock,
the CL display flashes.
Room temperature sensor selection
Press the THERMO SENSOR button to select whether the
room temperature is detected at the indoor unit (remote
sensor) or the remote controller.
When the thermo sensor display appears, the room
temperature is detected at the remote controller.
NOTES
•This function is locked at the factory. In order to detect the room temperature correctly, consult authorized service
personnel when using this function.
•If this function is locked, the location where the room temperature is detected cannot be changed and the
mark flashes when the THERMO SENSOR button is pushed.
Indoor unit
Energy save
9365350034_P1-P15 4/25/05, 1:48 PM4

5
TIMER FUNCTIONS
OFF timer (See page 5.)
Use this timer function to stop air conditioner operation. The timer operates and air conditioner operation stops
after the set time has passed. The timer can be set up to 24 hours in advance.
ON timer (See page 5.)
Use this timer function to start air conditioner operation. The timer operates and air condition operation starts
after the set time has passed. The timer can be set up to 24 hours in advance.
WEEKLY timer (See page 6.)
Use this timer function to set operating times for each day of the week.
Use the DAY OFF setting to switch off timed operation for a selected day in the coming week.
Because all days can be set together, the weekly timer can be used to repeat the timer settings for all of the days.
Temperature SET BACK timer (See page 8.)
Use this timer function to change the set temperature in the operation times set for each day of the week.
This can be used together with other timer settings.
ON/OFF TIMER
Press the timer mode button to se-
lect the ON timer or OFF timer.
2
•Press the DELETE button to cancel the timer mode.
•The timer mode can also be canceled by changing the timer mode using the timer mode button.
1
CLOCK ADJUST
NON
STOP
OFF
TIMER
ON
TIMER
WEEKLY
TIMER
No display
SU MO TU WE TH FR SA
Press the set time buttons to set the time.
After the time is set, the timer will start automatically.
The amount of time until the OFF timer operates that is dis-
played on the timer display decreases as time passes.
From 1 to 24 hours ex. OFF timer set for 6 hours
● To cancel
DELETE
To set the ON/OFF timer
9365350034_P1-P15 4/25/05, 1:48 PM5

6
SU MO TU WE TH FR SA
369 12 15 18 21
WEEKLY TIMER
Press the timer mode button to select the weekly timer.
2
Press the SET button for 2 sec-
onds or more.
1
3
CLOCK ADJUST
SU MO TU WE TH FR SA
369 12 15 18 21
● Day of the week setting
DAY OFF
DAY SET
12
Press the DAY button to select the day of the week, and then press the
SET button to confirm the setting.
For ALL, all of the days can be set together when a appears around
each day.
ALL SU MO TU WE TH FR SA
SU MO TU WE TH FR SA
369 12 15 18 21
4
● Time setting
Press the set time buttons to set the time, and then press the SET button
to confirm the setting and proceed to the next ON or OFF time setting.
Up to two ON and OFF times can be set per day.
Press the DAY button to complete the time setting and return to the day
of the week setting.
When the operating time is set, the
mark appears.
5
Repeat steps 3and 4.
To complete the weekly timer settings, press the SET
button for 2 seconds or more.
SET
● To delete the operating time
DELETE
If the DELETE button is pressed during
steps 3or 4, the operating time for the
selected day will be deleted.
If all the days are selected, the operating
times for all of the days will be deleted.
NOTES
•The operating time can be set in 30-minute increments only.
•The OFF time can be carried over to the next day.
•The ON timer and the OFF timer functions cannot be set using the weekly timer. Both an ON and OFF time must be set.
SET
Weekly timer setting
SET
12
DAY OFF
DAY
3
ON-1 OFF-1 ON-2 OFF-2
ex. The timer is set for 7:00-18:00.
9365350034_P1-P15 4/25/05, 1:48 PM6

7
WEEKLY TIMER
● To start
CLOCK ADJUST
SU MO TU WE TH FR SA
369 12 15 18 21
369 12 15 18 21
When the weekly timer is selected, the
timer starts automatically.
The operating time for the current
day is displayed.
ex. Operating time 7:00-18:00
● To cancel
•Press the DELETE button to cancel
the timer mode.
•The timer mode can also be
canceled by changing the timer
mode using the timer mode button.
To set the DAY OFF (for a holiday)
1
During the weekly timer,
press the SET button for 2
seconds or more to set the
day.
SET
Select the day to set the DAY
OFF.
Press the DAY (DAY OFF)
button for 2 seconds or
more to set the DAY OFF.
Press the SET button for 2
seconds or more to com-
plete the DAY OFF setting.
24
DAY OFF
DAY
SET
3
DAY OFF
DAY
SU MO TU WE TH FR SA
369 12 15 18 21
SU MO TU WE TH FR SA
369 12 15 18 21
●To cancel
Follow the same procedures as
those for setup.
ex. The DAY OFF is set for Monday.
NOTES
•The DAY OFF setting is only available for days for which weekly settings already exist.
•If the operating time carries over to the next day (during a next day setting), the effective DAY OFF range will be set as
shown below.
● Normal ● Next day setting
Setting dayPreceding day Next day Setting dayPreceding day Next day
•The DAY OFF setting can only be set one time. The DAY OFF setting is canceled automatically after the set day has
passed.
mark: Indicates the DAY OFF
ON OFF ON OFF
DAY OFF
WEEKLY WEEKLY
WEEKLY
WEEKLY
ON OFF ON OFF
DAY OFF
DELETE
WEEKLY timer operation
9365350034_P1-P15 4/25/05, 1:48 PM7

8
TEMPERATURE SET BACKTIMER
Press the SET BACK button to change to the SET BACK con-
firmation display.
The SET BACK operating time and the set temperature will
be displayed.
2
Press the SET button for 2
seconds or more.
1
3
● Day setting ● Operating time setting
Follow the same procedures to set the operating time as those for the weekly timer. The DELETE button is also used
as described in the procedures for the weekly timer.
4
NOTES
•The SET BACK timer only changes the set temperature, it cannot be used to start or stop air conditioner operation.
•The SET BACK timer can be set to operate up to two times per day but only one temperature setting can be used.
•The SET BACK timer can be used together with the ON, OFF, and weekly timer functions.
•The SET BACK operating time is displayed only in the SET BACK confirmation display. (Refer to step 1 for the SET BACK
confirmation display.)
SET BACK
SET
SU MO TU WE TH FR SA
369 12 15 18 21
DAY OFF
DAY
13
SET
2
SET
4
SU MO TU WE TH FR SA
369 12 15 18 21
ex. When setting all days together
● Temperature setting Press the set temperature buttons to set
the temperature. (The temperature setting
range is the same as the range for the
operation mode.)
ex. Operating time 15:00–22:00
5
Repeat steps 3and 4.
Press the SET button for 2 sec-
onds or more to complete the
temperature SET BACK timer
settings.
SET
ON OFF
24°C24°C
28°C
SET BACK temperature
Normal temperature
Temperature SET BACK timer operation
● To start
SET BACK
Press the SET BACK button. The SET BACK confirmation display appears
for 5 seconds, and then the timer starts automatically.
ex. Display during SET BACK timer operation
(The operating time will not be displayed.)
● To cancel
Press the SET BACK button, and then
press the DELETE button while the
SET BACK confirmation display is dis-
played. Even if the SET BACK button
is pressed again, the SET BACK timer
will be canceled.
Temperature SET BACK timer setting
SU MO TU WE TH FR SA
369 12 15 18 21
If there is no existing
SET BACK tempera-
ture setting, “- -”will
be displayed for the
temperature.
SET BACK
1
DELETE
2
SU MO TU WE TH FR SA
9365350034_P1-P15 4/25/05, 1:48 PM8

9
OPERATING TIPS
Mode operation: AUTO
COOLING MODEL
•When the room temperature is 2 °C higher than the set
temperature, the mode will switch between Cooling and
Drying.
•When in DRY operating mode, FAN will stop when the
room temperature becomes the same as the set tempera-
ture or below.
HEAT & COOL MODEL (Reverse Cycle)
Auto changeover function
•When AUTO CHANGEOVER is selected, the air conditioner
selects the appropriate operation mode (Cooling or Heat-
ing) according to your room’s present temperature.
•When AUTO CHANGEOVER is first selected, the fan will
operate at stop for about one minute while the unit deter-
mines the current conditions of the room and accordingly
selects the proper operation mode.
•When the air conditioner has adjusted your room’s tem-
perature to near the thermostat setting, it will begin moni-
tor operation. In the monitor operation mode, the fan will
operate at stop. If the room temperature subsequently
changes, the air conditioner will once again select the ap-
propriate operation (Heating, Cooling) to adjust the tem-
perature to the value set in the thermostat. (The monitor
operation range is ±2 °C relative to the thermostat setting.)
AUTO restart
•Should the power supply to the air conditioner be inter-
rupted by a power failure, the air conditioner will restart
automatically in the previously selected mode once the
power is restored.
•Use of other electrical appliances (electric shaver, etc.) or
nearby use of a wireless radio transmitter may cause the
air conditioner to malfunction. In this event, temporarily
turn off the circuit breaker turn it on again and then use
the remote controller to resume operation.
Heating performance
•This air conditioner operates on the heat-pump principle,
absorbing heat from outdoor air and transferring that heat
indoors. As a result, the operating performance is reduced
as outdoor air temperature drops. If you feel that insuffi-
cient heating performance is being produced, we recom-
mend you to use this air conditioner in conjunction with
another kind of heating appliance.
•Heat-pump air conditioners heat your entire room by
recirculating air throughout the room, with the result that
some time may be required after first starting the air
conditioner until the room is heated.
Energy save
•The energy conservation mode (ENERGY SAVE) raises the
set temperature slightly in the cooling mode and lowers
the set temperature in the heating mode to economically
control the operation of the unit.
•If you press the ENERGY SAVE button while the unit is in
the timer mode, the unit will go into the conservation mode
when the unit starts with the timer.
•If you turn off the air conditioner while in the conservation
mode, the mode will be shut off.
•The temperature set on the remote controller will not
change if the energy save mode is used.
Hot start (for heating)
The indoor unit prevents cold drafts when heating operation
begins.
The indoor unit fan does not operate until the heat exchanger
reaches the set temperature.
Defrosting (for heating)
When the outdoor temperature is low and the humidity high,
frost will collect on the outdoor unit, reducing heater efficiency.
When this happens, the computer will automatically start the
defrost cycle. During the defrost cycle, the indoor fan will
shut down and will be displayed on the remote
controller. It will take anywhere from 4 to 15 minutes before
the air conditioner starts up again.
Group Control
One remote controller can control up to 16 air conditioners.
All of the air conditioners will be operated with the same
settings.
Dual Remote Controllers (optional)
An additional remote controller can be added up to the
maximum of two remote controllers. Either remote controller
can control the air conditioner. However, the timer functions
cannot be used at the slave unit.
Commercial Mode
Instructions relating to heating are applicable only to “HEAT & COOL MODEL”(Reverse Cycle).
During cooling operation
When the ENERGY SAVE is
pressed, the thermostat setting
is automatically raised 1 °C every
60 minutes, until the thermostat
is raised a total of 2 °C.
27
25
26
Energy save
23
22
21
20
19
Energy save
During heating operation
When the ENERGY SAVE is
pressed, the thermostat setting
is automatically lowered 1 °C
every 30 minutes, until the ther-
mostat is lowered a total of 4 °C.
60 min.
30 min.
30 min.
30 min.
With this jumper line cut, the air conditioner cancels preven-
tion control of cool air at Heating mode or fan-cut during the
monitoring status at Auto mode, and it outputs the air of set
fan speed. Commercial mode does not apply to Dry mode
and it operates as per normal. *Refer to the INSTALLATION
INSTRUCTION SHEET for commercial mode setting.
9365350034_P1-P15 4/25/05, 1:48 PM9

10
CARE AND MAINTENANCE
SELF-DIAGNOSIS
1
2
Stop the air conditioner operation.
Press the set temperature buttons simultaneously for 5 seconds or more to
start the self-diagnosis.
SU MO TU WE TH FR SA
SU MO TU
WE TH FR SA
Unit number (usually 0)
Error code
ex. Self-dia
g
nosis checkex. Error display
3
Press the set temperature buttons simultaneously for 5 seconds or more to stop the self-diagnosis.
CAUTION!
Before cleaning the unit, be sure to stop the unit and power supply. (Turn off the electrical breaker.)
Cleaning the air filter
If dirt is allowed to collect in the air filter, the airflow will be reduced, leading to reduced performance, and increased operation
noise. Be sure to clean the filters regularly.
How to clean
Use a vacuum cleaner to remove dust and dirt from the air filter, or wash in a synthetic detergent. After washing, dry in a
shaded place, then reinstall.
●When used for extended periods, the unit may accumulate dirt inside, reducing its performance. We recommend that the
unit be inspected regularly, in addition to your own cleaning and care. For more information, consult authorized service
personnel.
●When cleaning the unit’s body, do not use water hotter than 40 °C, harsh abrasive cleansers, or volatile agents like benzene
or thinner.
●Do not expose the unit body to liquid insecticides or hairspray.
●If the unit will not be operated for a period of one month or more, be sure to allow the inner parts of the unit to dry
thoroughly, in advance, by operating the unit in fan mode for half a day.
When the error indication “E:EE”is displayed, inspection of the air conditioning system is necessary. Please consult author-
ized service personnel.
9365350034_P1-P15 4/25/05, 1:48 PM10

11
TROUBLESHOOTING
Symptom
Doesn’t operate immedi-
ately:
Noise is heard:
Smells:
Mist or steam are
emitted:
Air flow is stopped:
Water is produced from
the outdoor unit:
thermo sensor
display on the remote
controller is flashing:
Problem
●If the unit is stopped and then immediately started again, the
compressor will not operate for about 3 minutes, in order to
prevent fuse blowouts.
●Whenever the electrical breaker is turned off then on again, the
protection circuit will operate for about 3 minutes, preventing
unit operation during that period.
●During operation and immediately after stopping the unit, the
sound of water flowing in the air conditioner’s piping may be
heard. Also, noise may be particularly noticeable for about 2 to 3
minutes after starting operation (sound of coolant flowing).
●During Heating operation, a sizzling sound may be heard
occasionally. This sound is produced by the Automatic Defrost-
ing operation.
●Some smell may be emitted from the indoor unit. This smell is
the result of room smells (furniture, tobacco, etc.) which have
been taken into the air conditioner.
●During Cooling, a thin mist may be seen emitted from the indoor
unit. This results from the sudden Cooling of room air by the air
emitted from the air conditioner, resulting in condensation and
misting.
●During Heating operation, the outdoor unit’s fan may stop, and
steam may be seen rising from the unit. This is due to Automatic
Defrosting operation.
●When Heating operation starts, the fan stops temporarily to
allow internal parts to warm up.
●During Heating operation, if the room temperature rises above
the thermostat setting, the indoor and the outdoor unit will stop.
If you wish to warm the room further, set the thermostat for a
higher setting.
●During Heating operation, the unit will temporarily stop opera-
tion (between 2 and 16 minutes) as the Automatic Defrosting mode
operates. During Automatic Defrosting operation, will be
shown on the remote controller display.
●The fan may stop when the unit is monitoring the room’s tem-
perature.
●During Heating operation, water may be produced from the
outdoor unit due to Automatic Defrosting operation.
●The room temperature sensor may be malfunctioning. Please
consult authorized service personnel.
See Page
—
—
9
—
—
9
—
9
—
9
—
NORMAL
FUNCTION
Instructions relating to heating are applicable only to “HEAT & COOL MODEL”(Reverse Cycle).
WARNING!
In the event of a malfunction (burning smell, etc.), immediately stop operation, turn off the electrical breaker,
and consult authorized service personnel.
Merely turning off the unit’s power switch will not completely disconnect the unit from the power source.
Always be sure to turn off the electrical breaker to ensure that power is completely off.
Before requesting service, perform the following checks:
9365350034_P1-P15 4/25/05, 1:48 PM11

12
Symptom
Doesn’t operate at all:
Poor Cooling (or Heating)
performance:
See Page
—
5 to 7
—
CHECK ONCE
MORE
Items to check
●Has there been a power failure?
●Has a fuse blown out, or a circuit breaker been tripped?
●Is the timer operating?
●Is the air filter dirty?
●Are the air conditioner’s intake grille or outlet port blocked?
●Did you adjust the room temperature settings (thermostat)
correctly?
●Is there a window or door open?
●In the case of Cooling operation, is a window allowing bright
sunlight to enter? (Close the curtains.)
●In the case of Cooling operation, are there heating apparatus and
computers inside the room, or are there too many people in the
room?
If the problem persists after performing these checks, or if you notice burning smells, stop operation immediately, turn off the
electrical breaker, and consult with authorized service personnel.
TROUBLESHOOTING
TEMPERATURE AND HUMIDITY RANGE
Outdoor temperature:
About 0 to 46 °C
Indoor temperature:
About 18 °C to 30 °C
Indoor humidity:
Below approximately 80 %.
If the air conditioner is used continuously
for many hours, water may condense on
the surface and drip.
Outdoor temperature:
About –10 to 21 °C
Indoor temperature:
About below 30 °C
Cooling
Heating
Permissible ranges are as follows:
If the unit is used under higher temperature conditions than
those noted here, the automatic protection circuit may
operate, interrupting the operation. If the unit is used under
lower temperature conditions than those noted here, the
heat exchanger may freeze, causing water leakage or other
malfunction.
●Do not use the air conditioner for any purpose other than
room cooling, room heating, or fan.
9365350034_P1-P15 4/25/05, 1:48 PM12

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
9365350034_P1-P15 4/25/05, 1:48 PM13

9365350034_P1-P15 4/25/05, 1:48 PM14

9365350034_P1-P15 4/25/05, 1:48 PM15