Fujitsu FTP-628WSL210 Series User manual

Mobile Printer
FTP-628WSL210 Series
User's Guide
FUJITSU COMPONENT LIMITED

1
I In nt tr ro od du uc ct ti io on n
Thank you for purchasing the FTP-628WSL210 Series Mobile Printer
(hereafter referred to as “this product”).
This User's Guide (hereafter referred to as “this guide”) contains
precautions to use it safely and correctly.
Before using this product, please be sure to read complete this guide
to use it correctly.
In addition, please keep this guide handy for future reference.
If you have any suggestions or comments on this guide, please do
not hesitate to let us know.
Bluetooth® is registered trademark of Bluetooth SIG..
Apple is registered trademark of Apple Inc., registered in the U.S. and
other countries.
iPhone and iPad are registered trademarks of Apple Inc.
Android is trademarks of Google Inc.
All other product names and servis names are trademarks or registered
trademarks of their respective companies.
All Rights Reserved, Copyright ©
FUJITSU COMPONENT LIMITED 2012

2
P Pr re ec ca au ut ti io on ns s
■ Change of contents
The contents of this guide and this product are subject to change without
notice for the improvement.
■ Use to high safety application
This product was designed and manufactured assuming general purpose
use, such as standard industrial, general, personal and home use. This
product was not designed and manufactured for a “high safety
application”, that is, an application which demands extremely high safety
and which may have a serious influence on society and expose
individuals to serious danger if high safety is not assured (nuclear
reaction control in a nuclear facility, aircraft automatic flight control, air
traffic control, transport control in a mass transport system, medical
equipment for life support, missile launch control of a weapons system),
or an application which requires extremely high reliability (submarine
relay, space satellite), Therefore do not use this product for a high safety
application. If you are not certain whether this device is in a high safety
application category, contact Fujitsu Component Ltd. sales personnel
prior to use.
We shall take no responsibility for any damage caused by the use of this
product in a high safety application.
■ Copyright
This product and this guide are copyrighted works of
FUJITSU COMPONENT LIMITED.
This product and this manual must not be reproduced, duplicated, used,
or modified, partially or in full, without permission.

3
■ Regulatory Compliance
For Customers in USA (FCC)
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not
expressly approved by the party responsible for compliance could void
the userʼs authority to operate this equipment. (Example- use only
shielded interface cables when connecting to computer or peripheral
devices).

4
For Customers in CANADA (Industry Canada)
This equipment complies with Industry Canada RSS210 rules.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) this device must accept any interference received,
including interference that may cause undesired operation.
For Customers in EU (CE Marking)
This product is in conformance with the requirements of European
Council Directive:
R&TTE Directive 1995/5/EC
Applied standards:
EN 60950-1
EN 300 328
EN 301 489-1
EN 301 489-17
■ Export
This device may contain commodities, technology or software subject to
export laws and regulations from the US and other countries. Diversion
contrary to the country law is prohibited.
■ Warranty
We shall take no responsibility for any failure caused with wrong
operation or wrong environment.
Moreover, we cannot take responsibility of the loss, of the passive
damages or of the claim of the third party, even if it is caused by using or
breakdown of this product.
In addition, the range of the guarantee of the failure of this product will
never exceed the amount of money paid as a price of this product in any
case.

5
S Sa af fe et ty y P Pr re ec ca au ut ti io on ns s
■ Meaning of Symbols
The following symbols are used in this guide. Please understand
well the meaning of each symbol and read this guide.
Warning Indicates possibility of causing severe
personal injury or death if not used properly.
Caution
Indicates that a minor or some personal injury
may occur or that the product itself or other userʼs
property may be damaged.
Indicates danger, warning and caution.
A concrete content is described on the side of this
symbol.
Indicates an action that must not be performed.
A concrete content is described on the side of this
symbol.
Indicates an action that must be performed.
A concrete content is described on the side of this
symbol.
Important Indicates important points by using this product.

6
■ Ge n e r i c P r e c a u t i o n s
Warning
Fire
- Do not burn or heat.
Failure to observe this may cause smoke or fire or
breakdown.
Fire
- Do not pour water.
This equipment is not waterproof. Failure to observe this
may cause fire or burst or breakdown.
Fire
- Do not use or store the equipment in a hot
environment.
Failure to observe this may cause smoke or fire or
breakdown.
Fire
- Do not throw or drop.
Failure to observe this may cause fire or burst or breakdown.
Fire
- Do not use with wet hand. Do not drip or drop liquid
such as drinking waters, clips or other foreign matter.
Failure to observe this may cause fire or electric shock.
Break-
down
- In the event of the occurrence of heat or unusual smells
or smoke or excessive noise during use, please stop
using it immediately. Unplug the power cable, remove
the battery and please contact your sales
representative or maintenance engineer.
Break-
down
- Do not use in locations of corrosive gas or salt wind.
Failure to observe this may cause failure.
Modify
- Do not modify or disassemble.
Failure to observe this may cause fire or burst or breakdown.

7
Caution
Fire
- Do not use direct sun or dusty place that contains the oil
and iron.
Failure to observe this may cause heat, fire, or failure.
Fire
- If charging is not completed beyond the predetermined
charging time, unplug the charger, please stop the
charge.
The battery may leak by overcharging.
Fire
- Do not apply force to the cable.
Failure to observe this may cause fire or electric shock.
Injury
- Do not use while driving a vehicle or walking.
Failure to observe this may cause traffic accidents and
injuries caused by falls.
Break-
down
- Install the printer as far as possible from equipment
having large radiation noise, such as a high voltage
device and a large motor.
Failure to observe this may cause malfunction or breakdown.
Break-
down
- Separate the power line from other devices which
generate noise. (Large motor etc.)
Failure to observe this may cause malfunction or breakdown.
Failure
- Before using this product, be sure to read complete
user's guide to use it correctly.
It may cause the failure by wrong use.

8
■ Printer
Warning
Fire
- Do not put metal objects or flammable objects into the
gaps of the case.
Failure to observe this may cause fire, or electric shock.
Accident
- Do not use the printer in a location that is prohibited the
generation of radio waves.
Might be in an accident by the malfunction of the instrument.
Burn
- Surely turn off the printer power and check that the
printer head is sufficiently cooled down before cleaning.
Failure to observe this may cause burn injury.
Burn
- During or immediately after operation, do not touch the
print head and the support plate and the motor. Heat is
not immediately discharged after the stop.
Failure to observe this may cause burn injury.
Caution
Injury
- Be careful not to get a hand or hair caught in moving
part.
Failure to observe this may cause burn injury.
Injury
- Never insert fingers or metal into the paper insertion
and eject slots of the paper cutter.
Failure to observe this may cause equipment failure or injury.
Stop
- When printing continuously at a rate high printing,
head temperature warning may occur and printing may
stop.