Fujitsu PRIMERGY RX600 S5 User manual

Options Guide - English
PRIMERGY RX600 S5 Server
Options Guide
August 2012

Comments…Suggestions…Corrections…
The User Documentation Department would like to
know your opinion of this manual. Your feedback helps
us optimize our documentation to suit your individual
needs.
Feel free to send us your comments by e-mail to
E-Mail: [email protected]su.com.
Certified documentation
according to DIN EN ISO 9001:2000
To ensure a consistently high quality standard and
user-friendliness, this documentation was created to
meet the regulations of a quality management system
which complies with the requirements of the standard
DIN EN ISO 9001:2000.
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Copyright and Trademarks
© cognitas. Gesellschft für Technik-Dokumentation mbH 2010 Pfad: C:\Programme\FCT\tim_app\tim_local\work\PICHOL\OBJ_DOKU-4867-001.fm
Copyright © 2010 Fujitsu Technology_Solutions GmbH.
All rights reserved.
Delivery subject to availability; right of technical modifications reserved.
All hardware and software names used are trademarks of their respective manufacturers.
– The contents of this manual may be revised without prior notice.
– Fujitsu assumes no liability for damages to third-party copyrights or other rights arising from
the use of any information in this manual.
– No part of this manual may be reproduced in any form without the prior written permission
of Fujitsu.
Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of
Microsoft Corporation in the USA and other countries.
Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries
in the USA and other countries.

RX600 S5 Options Guide
Before reading this manual
For your safety
This manual contains important information for safely and correctly using this
product.
Carefully read the manual before using this product. Pay particular attention to
the accompanying manual "Safety notes and other important information" and
ensure these safety notes are understood before using the product. Keep this
manual and the manual "Safety notes and other important information" in a safe
place for easy reference while using this product.
Radio interference
This product is a "Class A" ITE (Information Technology Equipment). In a
domestic environment this product may cause radio interference, in which case
the user may be required to take appropriate measures. VCCI-A
Aluminum electrolytic capacitors
The aluminum electrolytic capacitors used in the product's printed circuit board
assemblies and in the mouse and keyboard are limited-life components. Use of
these components beyond their operating life may result in electrolyte leakage
or depletion, potentially causing emission of foul odor or smoke.
As a guideline, in a normal office environment (25°C) operating life is not
expected to be reached within the maintenance support period (5 years).
However, operating life may be reached more quickly if, for example, the product
is used in a hot environment. The customer shall bear the cost of replacing
replaceable components which have exceeded their operating life. Note that
these are only guidelines, and do not constitute a guarantee of trouble-free
operation during the maintenance support period.
High safety use
This product has been designed and manufactured for general uses such as
general office use, personal use, domestic use and normal industrial use. It has
not been designed or manufactured for uses which demand an extremely high
level of safety and carry a direct and serious risk to life or body if such safety
cannot be ensured.

OptionsGuide RX600 S5
© cognitas. Gesellschft für Technik-Dokumentation mbH 2010 Pfad: C:\Programme\FCT\tim_app\tim_local\work\PICHOL\OBJ_DOKU-4867-001.fm
These uses include control of nuclear reactions in nuclear power plants,
automatic airplane flight control, air traffic control, traffic control in mass
transport systems, medical devices for life support, and missile guidance control
in weapons systems (hereafter, "high safety use"). Customers should not use
this product for high safety use unless measures are in place for ensuring the
level of safety demanded of such use. Please consult the sales staff of Fujitsu if
intending to use this product for high safety use.
Measures against momentary voltage drop
This product may be affected by a momentary voltage drop in the power supply
caused by lightning. To prevent a momentary voltage drop, use of an AC
uninterruptible power supply is recommended.
(This notice follows the guidelines of Voltage Dip Immunity of Personal
Computer issued by JEITA, the Japan Electronics and Information Technology
Industries Association.)
Technology controlled by the Foreign Exchange and Foreign Trade
Control Law of Japan
Documents produced by Fujitsu may contain technology controlled by the
Foreign Exchange and Foreign Trade Control Law of Japan. Documents which
contain such technology should not be exported from Japan or transferred to
non-residents of Japan without first obtaining authorization in accordance with
the above law.
Harmonic Current Standards
This product conforms to harmonic current standard JIS C 61000-3-2.
Only for the Japanese market: About SATA hard disk drives
The SATA version of this server supports hard disk drives with SATA / BC-SATA
storage interfaces. Please note that the usage and operation conditions differ
depending on the type of hard disk drive used.
Please refer to the following internet address for further information on the
usage and operation conditions of each available type of hard disk drive:
http://primeserver.fujitsu.com/primergy/harddisk/

RX600 S5 Options Guide
Only for the Japanese market:
IAlthough described in this manual, some sections do not apply to the
Japanese market. These options and routines include:
– USB Flash Module (UFM)
– Replacing the lithium battery

OptionsGuide RX600 S5
© cognitas. Gesellschft für Technik-Dokumentation mbH 2010 Pfad: C:\Programme\FCT\tim_app\tim_local\work\PICHOL\OBJ_DOKU-4867-001.fm

RX600 S5 Options Guide
Contents
1 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1.1 Concept and target groups . . . . . . . . . . . . . . . . . . . 9
1.2 Documentation overview . . . . . . . . . . . . . . . . . . . 10
1.3 Extensions and conversions . . . . . . . . . . . . . . . . . 11
1.4 Notational conventions . . . . . . . . . . . . . . . . . . . . 12
2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 15
4 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
4.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . . 22
5 Main memory . . . . . . . . . . . . . . . . . . . . . . . . . . 25
5.1 Population rules . . . . . . . . . . . . . . . . . . . . . . . . 26
5.2 Expanding the main memory . . . . . . . . . . . . . . . . . 28
5.2.1 Filling empty slots of a populated board . . . . . . . . . . . . . 28
5.2.2 Installing an additional memory board . . . . . . . . . . . . . . 31
6 Processors . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
6.1 Installing additional processors . . . . . . . . . . . . . . . . 33
6.2 Replacing a processor . . . . . . . . . . . . . . . . . . . . . 41
6.3 Replacing the heat sink . . . . . . . . . . . . . . . . . . . . 45
7 Tape drives . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

OptionsGuide RX600 S5
Contents
© cognitas. Gesellschft für Technik-Dokumentation mbH 2010 Pfad: C:\Programme\FCT\tim_app\tim_local\work\PICHOL\OBJ_DOKU-4868-001.fm
7.1 Removing the module frame . . . . . . . . . . . . . . . . . . 48
7.2 Installing the tape drive . . . . . . . . . . . . . . . . . . . . . 50
7.3 Cabling the tape drive . . . . . . . . . . . . . . . . . . . . . 52
7.3.1 Cabling the USB tape drive . . . . . . . . . . . . . . . . . . . 53
7.3.2 Cabling the SAS tape drive . . . . . . . . . . . . . . . . . . . 55
8 Expansion cards and BBU . . . . . . . . . . . . . . . . . . . 57
8.1 Installing expansion cards . . . . . . . . . . . . . . . . . . . 58
8.2 Installing a BBU . . . . . . . . . . . . . . . . . . . . . . . . . 63
9 Further options . . . . . . . . . . . . . . . . . . . . . . . . . 69
9.1 TPM (Trusted Platform Module) . . . . . . . . . . . . . . . . . 69
9.2 UFM (USB Flash Module) . . . . . . . . . . . . . . . . . . . . 72
10 Completion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
11 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
11.1 Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

RX600 S5 Options Guide 9
1 Preface
The scalable PRIMERGY RX600 S5 Server is an Intel-based rack server for
critical company scenarios, e.g. a database management system for medium or
large-sized databases or as a consolidation basis to run a vast number of
different applications using virtualization technologies.
Thanks to its highly developed hardware and software components, the server
offers a high level of data security and availability. These include hot-plug HDD
modules, hot-plug system fans, hot-plug power supply units, the Server
Management ServerView Suite, Prefailure Detection and Analysis (PDA) and
Automatic Server Reconfiguration and Restart (ASR&R).
Security functions in the BIOS setup and on the system board protect the data
on the server against manipulation. Additional security is provided by the
lockable rack door.
The server is used exclusively as a rack model. It offers a whole host of
configuration options but only uses four height units in the 19-inch rack.
1.1 Concept and target groups
This Options Guide shows you how to extend and upgrade your server.
VCAUTION!
The activities described in this manual may only be performed by
technical specialists.
IThe installation and removal of the hot-plug components is described in
the Operating Manual supplied with the server.

10 OptionsGuide RX600 S5
Documentation overview Preface
© cognitas. Gesellschft für Technik-Dokumentation mbH 2010 Pfad: C:\Programme\FCT\tim_app\tim_local\work\PICHOL\OBJ_DOKU-4869-001.fm
1.2 Documentation overview
More information on your PRIMERGY RX600 S5 can be found in the following
documents:
– "Quick Start Hardware - PRIMERGY RX600 S5" leaflet
"はじめにお読みください -PRIMERGY RX600 S5" for the Japanese market
(only included as a printed copy)
– "Quick Start Software - Quick Installation Guide" DVD booklet
(only included with the ServerView Suite as a printed copy) except for the
Japanese market
– "Safety notes and other important information" manual
"安全上の注意およびその他の重要情報 " for the Japanese market
– "Warranty" manual
"保証書 " for the Japanese market
– "ServerView Suite Local Service Concept - LSC" manual
– "Returning used devices" manual and "Service Desk" leaflet
"サポート＆サービス " for the Japanese market
– "PRIMERGY RX600 S5 Server Operating Manual"
– "PRIMERGY RX600 S5 Server Options Guide"
– "System Board D2870 for PRIMERGY RX600 S5 Technical Manual"
– "D2870 BIOS Setup Utility for PRIMERGY RX600 S5" manual
IPRIMERGY manuals are available in PDF format on the
ServerView Suite DVD 2. The ServerView Suite DVD 2 is part of the
ServerView Suite supplied with every server.
If you no longer have the ServerView Suite DVDs, you can obtain the
relevant current versions using the order number U15000-C289 (the
order number for the Japanese market: please refer to the configurator
of the server http://primeserver.fujitsu.com/primergy/system.html).
The PDF files of the manuals can also be downloaded free of charge
from the Internet. The overview page showing the online documentation
available on the Internet can be found using the URL (for EMEA market):
http://manuals.ts.fujitsu.com. The PRIMERGY server documentation can
be accessed using the Industry standard servers navigation option.
For the Japanese market please use the URL:
http://primeserver.fujitsu.com/primergy/manual.html.

RX600 S5 Options Guide 11
Preface Extensions and conversions
Further sources of information:
– PRIMERGY Abbreviations and Glossary on the ServerView Suite DVD 2
– Manual for the monitor
– Documentation for the boards and drives
– Operating system documentation
– Information files in your operating system
1.3 Extensions and conversions
Main memory
The system board has space for up to eight memory boards, each of which can
be fitted with up to eight memory modules. The slots for the main memory are
suitable for 2 GB, 4 GB, 8 GB and 16 GB DDR3 1066/1333 MHz memory
modules. This allows a maximum memory capacity of 1024 GB (as soon as
16 GB memory modules are available).
Processors
The system board can be upgraded to include up to four processors. You may
only use processors of the same type; all processors must have the same
frequency and cache size.
Accessible drives
You can add a CD/DVD/BD drive in 0.5x5.25-inch format and a tape drive in
5.25x1.6-inch format.
Additional expansion cards in PCI slots
The system board offers 12 PCI Express slots:
– 2x hot-plug PCI Express 2.0 slots (x8)
– 1x PCI Express 2.0 slot (x16)
– 2x PCI Express 2.0 slots (x8)
– 3x PCI Express 2.0 slots (x4)
– 2x PCI Express 1.0 slots (x4)
– 1x PCI Express 1.0 slot (x1), dedicated for I/O riser board
– 1x PCI Express 2.0 slot (x8), dedicated for SAS controller card

12 OptionsGuide RX600 S5
Notational conventions Preface
© cognitas. Gesellschft für Technik-Dokumentation mbH 2010 Pfad: C:\Programme\FCT\tim_app\tim_local\work\PICHOL\OBJ_DOKU-4869-001.fm
Additional power supplies
The server can be fitted with up to four hot-plug power supplies to achieve
redundancy and to run in full configuration (for a description see the Operating
Manual).
Battery Backup Unit (BBU)
Two optional intelligent battery backup units are available for SAS RAID
controllers to protect their memory contents in the event of a power failure.
Trusted Platform Module (TPM)
The server can be fitted with a TPM (Trusted Platform Module). This module
enables programs from third-party manufacturers to store key information.
USB Flash Module (UFM)
The server can be fitted with two USB Flash Modules (UFM).
These modules can be used as optional memory for embedded software
solutions (e.g. VMware) or as a software dongle.
1.4 Notational conventions
The following notational conventions are used in this manual:
Text in italics indicates commands or menu items.
"Quotation marks" indicate names of chapters and terms that are being
emphasized.
Êdescribes activities that must be performed in the order
shown.
VCAUTION! pay particular attention to texts marked with this symbol.
Failure to observe this warning may endanger your life,
destroy the system or lead to the loss of data.
Iindicates additional information, notes and tips.

RX600 S5 Options Guide 13
2Procedure
VCAUTION!
●The actions described in this manual shall be performed by technical
specialists. A technical specialist is a person who is trained to install
the server including hardware and software.
●Repairs to the device that do not relate to CSS failures shall be
performed by service personnel. Please note that unauthorized
interference with the system will void the warranty and exempt the
manufacturer from all liability.
●Any failure to observe the guidelines in this manual, and any improper
repairs could expose the user to risks (electric shock, energy
hazards, fire hazards) or damage the equipment.
●Before installing/removing internal options to/from the server, turn off
the server, all peripheral devices, and any other connected devices.
Also unplug all power cords from the power outlet. Failure to do so
can cause electric shock.
ÊFirst of all, carefully read the safety instructions in the chapter "Safety
instructions" on page 15.
ÊMake sure that all necessary manuals (see the section "Documentation
overview" on page 10) are available; print the PDF files if required. Most
importantly, you will need the Operating Manual for the server and the
Technical Manual for the system board.
ÊShut the server down correctly, switch it off, disconnect the power cords and
open the server as described in the chapter "Preparation" on page 21.
ÊCarry out the expansion or upgrade of your server as described in the
pertinent chapter.
IInstallation and removal of the hot-plug components are described in
the Operating Manual.
ÊClose the server, connect it to the power outlet, and switch it on as described
in the chapter "Completion" on page 75.
ÊStart the operating system and make the appropriate configuration if
necessary (see the Operating Manual).

14 OptionsGuide RX600 S5
Procedure
© cognitas. Gesellschft für Technik-Dokumentation mbH 2010 Pfad: C:\Programme\FCT\tim_app\tim_local\work\PICHOL\OBJ_DOKU-4870-001.fm
IFor the latest information on optional products provided for the RX600 S5
see the configurator of this server:
https://sp.ts.fujitsu.com/dmsp/docs/cnfgrx600s5.pdf

RX600 S5 Options Guide 15
3 Safety instructions
IThe following safety instructions are also provided in the manual "Safety
notes and other important information".
This device meets the relevant safety regulations for IT equipment. If you have
any questions about whether you can install the server in the intended
environment, please contact your sales outlet or our customer service team.
VCAUTION!
●The actions described in this manual shall be performed by technical
specialists. A technical specialist is a person who is trained to install
the server including hardware and software.
●Repairs to the device that do not relate to CSS failures shall be
performed by service personnel. Please note that unauthorized
interference with the system will void the warranty and exempt the
manufacturer from all liability.
●Any failure to observe the guidelines in this manual, and any improper
repairs could expose the user to risks (electric shock, energy
hazards, fire hazards) or damage the equipment.
●Before installing/removing internal options to/from the server, turn off
the server, all peripheral devices, and any other connected devices.
Also unplug all power cords from the power outlet. Failure to do so
can cause electric shock.
Before starting up
VCAUTION!
●During installation and before operating the device, observe the
instructions on environmental conditions for your device.
●If the device is brought in from a cold environment, condensation may
form both inside and on the outside of the device.
Wait until the device has acclimatized to room temperature and is
absolutely dry before starting it up. Material damage may be caused
to the device if this requirement is not observed.
●Transport the device only in the original packaging or in packaging
that protects it from knocks and jolts.

16 OptionsGuide RX600 S5
Safety instructions
© cognitas. Gesellschft für Technik-Dokumentation mbH 2010 Pfad: C:\Programme\FCT\tim_app\tim_local\work\PICHOL\OBJ_DOKU-4871-001.fm
Installation and operation
VCAUTION!
●If the device is integrated in an installation that receives power from
an industrial (public) power supply network with the IEC309
connector, the (public) power supply protection must comply with the
requirements for the non-industrial (public) power supply networks for
the type A connector.
●The device automatically sets itself to a voltage in the range of 100 -
127 V / 200 - 240 V. Make sure that your local voltage is within this
range.
●This device has a specially approved power cable and must only be
connected to a safety socket on the rack mains socket strip.
●The ON/OFF button does not disconnect the device from the mains
voltage. To completely disconnect it from the mains voltage, remove
the power plug from the safety socket.
●Always connect the device and the attached peripherals to the same
power circuit. Otherwise you run the risk of losing data if, for example,
the server is still operating but the peripheral device (e.g. storage
subsystem) has failed during a power outage.
●Take notice that the data cables to peripheral devices are adequately
shielded.
●To the LAN wiring the requirements apply in accordance with the
standards EN 50173 and EN 50174-1/2. As minimum requirement
the use of a protected LAN line of category 5 for 10/100 Mbit/s
Ethernet, and/or of category 5e for Gigabit Ethernet is considered.
The requirements of the specification ISO/IEC 11801 are to be
considered.
●Route the cables in such a way that they do not form a potential
hazard and that they cannot be damaged. When connecting up a
device, refer to the relevant notes in this manual.
●Never connect or disconnect data transmission lines during a storm
(risk of lightning hazard).
●Make sure that no objects (such as bracelets or paper clips) fall into
or liquids spill into the device (risc of electric shock or short circuit).

RX600 S5 Options Guide 17
Safety instructions
VCAUTION!
●In emergencies (e.g. damaged casing, controls or cables, penetration
of liquids or foreign matter), switch off the device immediately, remove
the power plug from the safety socket and contact your sales outlet or
customer service team.
●Proper operation of the device (in accordance with IEC 60950-1/2
resp. EN 60950-1/2) is only ensured if the casing is completely
assembled and the rear covers for the installation openings have
been put in place (electric shock, cooling, fire protection, interference
suppression).
●Only install system expansions that satisfy the requirements and
rules governing safety and electromagnetic compatibility and relating
to telecommunications terminal equipment. If you install other
expansions, you may damage the system or violate the safety
regulations and regulations governing RFI suppression. Information
on which system expansions are suitable can be obtained from the
customer service centre or your sales outlet.
●The components or parts marked with a warning label (e.g. lightning
symbol) may only be opened, removed or exchanged by authorized,
qualified personnel.
●The warranty expires if the device is damaged during the installation
or replacement of system expansions.
●You may only set those resolutions and refresh rates specified in the
operating manual of the monitor. Otherwise, you may damage your
monitor. If you are in any doubt, contact your sales outlet or customer
service centre.
Batteries
VCAUTION!
●Incorrect replacement of batteries may result in a risk of explosion.
The batteries may only be replaced with identical batteries or with a
type recommended by the manufacturer (see the Technical Manual
for the system board).
●Replace the lithium battery on the system board in accordance with
the instructions in the Technical Manual for the system board.

18 OptionsGuide RX600 S5
Safety instructions
© cognitas. Gesellschft für Technik-Dokumentation mbH 2010 Pfad: C:\Programme\FCT\tim_app\tim_local\work\PICHOL\OBJ_DOKU-4871-001.fm
Working with CDs/DVDs/BDs and optical drives
When working with devices with optical drives, these instructions must be
followed.
VCAUTION!
●Only use CDs/DVDs/BDs that are in perfect condition, in order to
prevent data loss, equipment damage and injury.
●Check each CD/DVD/BD for damage, cracks, breakages etc. before
inserting it in the drive.
Note that any additional labels applied may change the mechanical
properties of a CD/DVD/BD and cause imbalance.
Damaged and imbalanced CDs/DVDs/BDs can break at high drive
speeds (data loss).
Under certain circumstances, sharp CD/DVD/BD fragments can
pierce the cover of the optical drive (equipment damage) and can fly
out of the device (danger of injury, particularly to uncovered body
parts such as the face or neck).
●High humidity and airborne dust levels are to be avoided. Electric
shocks and/or server failures may be caused by liquids such as water,
or metallic items, such as paper clips, entering a drive.
●Shocks and vibrations are also to be avoided.
●Do not insert any objects other than the specified CDs/DVDs/BDs.
●Do not pull on, press hard, or otherwise handle the CD/DVD/BD tray
roughly.
●Do not disassemble the optical drive.
●Before use, clean the optical disk tray using a soft, dry cloth.
●As a precaution, remove disks from the optical drive when the drive
is not to be used for a long time. Keep the optical disk tray closed to
prevent foreign matter, such as dust, from entering the optical drive.
●Hold CDs/DVDs/BDs by their edges to avoid contact with the disk
surface.

RX600 S5 Options Guide 19
Safety instructions
●Do not contaminate the CD/DVD/BD surface with fingerprints, oil,
dust, etc. If dirty, clean with a soft, dry cloth, wiping from the center to
the edge. Do not use benzene, thinners, water, record sprays,
antistatic agents, or silicone-impregnated cloth.
●Be careful not to damage the CD/DVD/BD surface.
●Keep the CDs/DVDs/BDs away from heat sources.
●Do not bend or place heavy objects on CDs/DVDs/BDs.
●Do not write with ballpoint pen or pencil on the label (printed) side.
●Do not attach stickers or similar to the label side. Doing so may cause
rotational eccentricity and abnormal vibrations.
●When a CD/DVD/BD is moved from a cold place to a warm place,
moisture condensation on the CD/DVD/BD surface can cause data
read errors. In this case, wipe the CD/DVD/BD with a soft, dry cloth
then let it air dry. Do not dry the CD/DVD/BD using devices such as a
hair dryer.
●To avoid dust, damage, and deformation, keep the CD/DVD/BD in its
case whenever it is not in use.
●Do not store CDs/DVDs/BDs at high temperatures. Areas exposed to
prolonged direct sunlight or near heating appliances are to be
avoided.
IYou can prevent damage from the optical drive and the CDs/DVDs/BDs,
as well as premature wear of the disks, by observing the following
suggestions:
– Only insert disks in the drive when needed and remove them after
use.
– Store the disks in suitable sleeves.
– Protect the disks from exposure to heat and direct sunlight.
Laser information
The optical drive complies with IEC 60825-1 laser class 1.
VCAUTION!
The optical drive contains a light-emitting diode (LED), which under
certain circumstances produces a laser beam stronger than laser
class 1. Looking directly at this beam is dangerous.
Never remove parts of the optical drive casing!

20 OptionsGuide RX600 S5
Safety instructions
© cognitas. Gesellschft für Technik-Dokumentation mbH 2010 Pfad: C:\Programme\FCT\tim_app\tim_local\work\PICHOL\OBJ_DOKU-4871-001.fm
Modules with electrostatic-sensitive components
Systems and components that might be damaged by electrostatic discharge
(ESD) are marked with the following label:
Figure 1: ESD label
When you handle components fitted with ESDs, you must observe the following
points under all circumstances:
●Remove the power plug before installing or removing components
containing ESDs.
●You must always discharge yourself of static charges (e.g. by touching a
grounded object) before working.
●The equipment and tools you use must be free of static charges.
●Only touch the components at the positions highlighted in green (touch
points).
●Do not touch any exposed pins or conductors on a component.
●Use a grounding cable designed for this purpose to connect yourself to the
system unit as you install components.
●Place all components on a static-safe base.
IYou will find a detailed description for handling ESD components in the
relevant European or international standards (DIN EN 61340-5-1,
ANSI/ESD S20.20).