Fujitsu Primepower200 User manual

P321-E122-04EN
PRIMEPOWER
PRIMEPOWER200
PRIMEPOWER400
PRIMEPOWER600

Preface
This manual explains the features, functions, installation and additions to the PRIMEPOWER200,
PRIMEPOWER400 and PRIMEPOWER600 servers and is intended for experienced users with a basic knowledge
of UNIX and UNIX servers.
This preface describes the following items:
 SAFE OPERATION
 Introduction to Chapters
 Related Manuals
 Warning Message Conventions
 Operating Environment
 Prohibited Uses
 FCC Class A Notice
 Trademarks
 Copyright
SAFE OPERATION
Using This Manual
This manual contains important information regarding the use and handling of this product. Read
this manual thoroughly. Pay special attention to the section "Important Warnings". Use the product
according to the instructions and information available in this manual.
FUJITSU makes every efforts to prevent users and bystanders from being injured or from suffering
damage to their property. Use the product according to this manual.
i

Introduction to Chapters
The structure of this manual is as follows:
CHAPTER 1 Features of the PRIMEPOWER Servers
Chapter 1 gives an overview of the features of the PRIMEPOWER of servers.
CHAPTER 2 PRIMEPOWER200 Pedestal Server
Chapter 2 gives an overview of the PRIMEPOWER200 Pedestal Server, names and functions of
parts, preparations for use, and expansion.
CHAPTER 3 PRIMEPOWER200 Rackmount (4U) Server
Chapter 3 gives an overview of the PRIMEPOWER200 Rackmount (4U) Server, names and
functions of parts, preparations for use, and expansion.
CHAPTER 4 PRIMEPOWER400 Pedestal Server
Chapter 4 gives an overview of the PRIMEPOWER400 Pedestal Server, names and functions of
parts, preparations for use, and expansion.
CHAPTER 5 PRIMEPOWER400 Rackmount (4U) Server
Chapter 5 gives an overview of the PRIMEPOWER400 Rackmount (4U) Server, names and
functions of parts, preparations for use, and expansion.
CHAPTER 6 PRIMEPOWER400 Rackmount (10U) Server
Chapter 6 gives an overview of the PRIMEPOWER400 Rackmount (10U) Server, names and
functions of parts, preparations for use, and expansion.
CHAPTER 7 PRIMEPOWER600 Pedestal Server
Chapter 7 gives an overview of the PRIMEPOWER600 Pedestal Server, names and functions of
parts, preparations for use, and expansion.
CHAPTER 8 PRIMEPOWER600 Rackmount (10U) Server
Chapter 8 gives an overview of the PRIMEPOWER600 Rackmount (10U) Server, names and
functions of parts, preparations for use, and expansion.
CHAPTER 9 Expansion Disk Cabinet
Chapter 9 gives an overview of the Expansion Disk Cabinet, names and functions of parts,
installation, configuration of the disk drive bay, and hot-swapping of redundant components.
CHAPTER 10 Expansion File Unit Type-2
Chapter 10 gives an overview of the Expansion File Unit Type-2, names and functions of parts,
installation, configuration of the disk drive bay, and hot-swapping of redundant components.
CHAPTER 11 Internal I/O Units
Chapter 11 gives an overview of how to use the various internal I/O devices.
CHAPTER 12 RCI Commands
Chapter 12 gives an overview of the RCI commands.
CHAPTER 13 Troubleshooting
Chapter 13 helps the user isolate the causes of system failures, and suggests possible solutions.
CHAPTER 14 Glossary
Chapter 14 explains the meaning of the various specialized terms used in this manual.
ii

Related Manuals
The following manuals contain related material:
"Enhanced Support Facility User’s Guide"
"Enhanced Support Facility Installation Guide"
"Enhanced Support Facility Machine Administration Instructions"
Warning Message Conventions
A warning message consists of a label and statements. The following warning message types are displayed to
prevent users and bystanders from being injured or from suffering property damage.
WARNING
This indicates a hazardous situation that could result in death or serious injury if the user does not
perform the procedure correctly.
CAUTION
This indicates a hazardous situation that could result in minor or moderate personal injury if the user
does not perform the procedure correctly. It also indicates that damage to the product or other
property may occur of the user does not perform the procedure correctly.
IMPORTANT
This indicates information that could help the user use the product more efficiently.
How warning messages are displayed in the manual
Each warning message is accompanied by an indicator of the warning type, followed by a more detailed
explanation.
(Example)
WARNING
Electric shock/fire
If you detect an abnormality such as heat build-up, smoke or foul
odor, immediately turn the AC main line switch OFF, or disconnect
the power cable, and contact a service engineer. Failure to do so
might cause electric shock or fire.
Important warning messages are summarized under "Important Warnings".
iii

Operating Environment
This product has been designed and produced to be used safely by general users in a general office environment.
When using this product, observe the installation and handling precautions described in this manual.
Prohibited Uses
This Product is designed, developed and manufactured as contemplated for general use, including without
limitation, general office use, personal use and household use, but is not designed, developed and manufactured as
contemplated for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could lead
directly to death, personal injury, severe physical damage or other loss (hereinafter "High Safety Required Use"),
including without limitation, nuclear power core control, airplane control, air traffic control, mass transport
operation control, life support, weapon launching control. You shall not use this Product without securing the
sufficient safety required for the High Safety Required Use. Hence, if these products are used in such hazardous
environments, FUJITSU LIMITED and SUN MICROSYSTEMS, INC. Do not warrant them at all. If you wish to
use this Product for High Safety Required Use, please consult with our sale person in charge before such use.
Documents produced by FUJITSU may contain technology controlled under the Foreign Exchange and Foreign
Trade Control Law of Japan. Those documents containing such technology should not be exported from Japan or
transferred to anyone other than residents of Japan without first obtaining license from the Ministry of
International Trade and Industry of Japan in accordance with the above law.
FCC Class A Notice
CAUTION
This equipment has been tested and found to comply with the limits for a Class digital
device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment.This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
This product is compliant with harmonics guidelines.
Trademarks
 Solaris is a trademark of Sun Microsystems Inc.
 SPARC64 is a registered trademark or trademark of SPARC International, Inc. in the United States and other
countries, under license by Fujitsu Ltd.
iv

Copyright
All rights reserved. This product and related documentation are protected by copyright and distributed under
licenses already restricting its use, copying, distribution, and recompilation. No part of this product or related
documentation may be reproduced in any form by any means without prior written authorization of Fujitsu
Limited and its licensors, if any.
The contents of this manual may be revised without prior notice.
All Rights Reserved, Copyright (c) FUJITSU LIMITED 2001
v

Safety Cautions
Important Warnings
The following types of warnings are found in this manual:
WARNING
This indicates a hazardous situation could result in death or serious injury if the
user does not perform the procedure correctly.
Normal Operation Warnings
task
Electric shock/fire
Electric shock/fire
Do not deform, damage or strip the power cable.
Doing so might cause electric shock or fire.
If you detect an abnormality such as heat build-up,
smoke or foul odor, immediately turn the main line
switch OFF, or disconnect the power cable, and
contact a service engineer. Failure to do so might
cause electric shock or fire.
Warning
vi

CAUTION This indicates a hazardous situation that could result in minor or moderate
personal injury if the user does not perform the procedure correctly. Also,
damage to the product or other property may occur.
Normal Operation Cautions
Task
Data destruction:
Data destruction:
Data destruction:
Data destruction:
Data destruction:
Data destruction:
Data destruction:
Data destruction:
Unit damage/
Data destruction:
Unit damage:
Pressing the RESET switch while the system is running may
cause data to be lost.
Caution
Install "Enhanced Support Facility" before operating the system.
Without this package, incorrect front panel operations and
hardware errors may cause the system to shutdown or cause data
to be lost.
Pressing the REQUEST switch while the system is running
may cause data to be lost.
Do not turn the console (unit connected to serial port) on
after turning the PRIMEPOWER on, or turn the console off while
the PRIMEPOWER is on. Doing so might cause system
malfunction and cause data to be lost.
Before turning the power off, check the following points.
Otherwise, data may be lost.
Are there any currently executing programs?
Are there any current users?
Are floppy disks or tape cartridges still inserted in
their drives?
If necessary, back up files before turning the power off.
If improper commands are used at the ok prompt, data may be
lost. If you need to use any other commands except those given
in this manual, you should fully understand the function and usage
of the command before using it.
Except in any emergency, never turn the AC main line switch or
disconnect the power cable while the PRIMEPOWER is turned on.
If you do, data in the disk drive may be lost.
Before you eject a floppy disk, be sure to either execute
the Solaris eject command, or perform eject operation in the
application you are using. Failure to do so might cause data to be
lost. Also, do not eject a floppy disk while the access
LED is on. Doing so may damage the disk.
Pay attention to the following points when handling the
hard disk units. If these precautions are not observed,
the magnetic disk unit may be damaged or data lost.
Do not subject the unit to exceeds impact.
Do not bring the unit near to equipment (motors,
speakers, etc.) that generate strong magnetic fields.
Do not store the unit at locations likely to cause
condensation inside the unit or at locations subject to
sudden changes in temperature or humidity.
Do not connect I/O units to the maintenance port.
Connecting I/Os to the SCF port may damage this unit.
vii

Product Handling Cautions
Maintenance
WARNING
The following operations on this product and options provided by FUJITSU
should be performed by a service engineer, and should not be performed by the
user. Otherwise, the user may create the risk of electric shock, injury or fire.
 New installation and moving of units
 Removal of the front, rear and side panel covers
 Mounting/removal of built-in option units
 Connection/disconnection of external interface cables
 Maintenance (repair and periodic diagnosis and maintenance)
CAUTION The following operations on this product and options provided by FUJITSU
should be performed by a service engineer, and should not be performed by the
user. Otherwise, the user may cause the products to malfunction.
 Unpacking of option adapter, etc. delivered to the customer
 Removal of the front panel, rear panel and side panel covers
 Mounting/removal of built-in option units
 Connection/disconnection of external interface cables
 Maintenance (repair and periodic diagnosis and maintenance)
viii

Remodeling and Recycling of This Product
If this product is remodeled with secondhand parts,overhauled, or recycled as is, users and bystanders may be
injured and property damaged unexpectedly.
ix

CONTENTS
CHAPTER 1 Features of the PRIMEPOWER Servers 1
CHAPTER 2 PRIMEPOWER200 Pedestal Server 3
2.1 Overview
:::::::::::::::::::::::::::::::::::::: 4
2.2 Names and Functions of Parts
:::::::::::::::::::::::::::: 5
2.2.1 Front side
::::::::::::::::::::::::::::::::::: 5
2.2.2 Control panel
::::::::::::::::::::::::::::::::: 6
2.2.3 Rear side
::::::::::::::::::::::::::::::::::: 8
2.3 Preparations for Use
::::::::::::::::::::::::::::::::: 10
2.3.1 Installation notes
::::::::::::::::::::::::::::::: 10
2.3.2 Installation specifications
::::::::::::::::::::::::::: 12
2.3.3 Connecting the console
:::::::::::::::::::::::::::: 14
2.3.4 Turning the power on
::::::::::::::::::::::::::::: 14
2.3.5 Turning the power off
::::::::::::::::::::::::::::: 16
2.3.6 Installing the Enhanced Support Facility package
::::::::::::::: 17
2.3.7 How to enable/disable the break signal
:::::::::::::::::::: 18
2.3.8 LAN expansion note
::::::::::::::::::::::::::::: 19
i

2.4 Expanding the Server Unit :::::::::::::::::::::::::::::: 20
2.4.1 Adding CPU modules
::::::::::::::::::::::::::::: 21
2.4.2 Adding memory modules
::::::::::::::::::::::::::: 21
2.4.3 Adding hard disk drives
:::::::::::::::::::::::::::: 22
2.4.4 Adding PCI cards
::::::::::::::::::::::::::::::: 24
CHAPTER 3 PRIMEPOWER200 Rackmount (4U) Server 25
3.1 Overview
:::::::::::::::::::::::::::::::::::::: 26
3.2 Names and Functions of Parts
:::::::::::::::::::::::::::: 27
3.2.1 Front side
::::::::::::::::::::::::::::::::::: 27
3.2.2 Control panel
::::::::::::::::::::::::::::::::: 27
3.2.3 Rear side
::::::::::::::::::::::::::::::::::: 30
3.3 Preparations for Use
::::::::::::::::::::::::::::::::: 31
3.3.1 Installation notes
::::::::::::::::::::::::::::::: 31
3.3.2 Installation specifications
::::::::::::::::::::::::::: 33
3.3.3 Connecting the console
:::::::::::::::::::::::::::: 34
3.3.4 Turning the power on
::::::::::::::::::::::::::::: 35
3.3.5 Turning the power off
::::::::::::::::::::::::::::: 37
3.3.6 Installing the Enhanced Support Facility package
::::::::::::::: 38
3.3.7 How to enable/disable the break signal
:::::::::::::::::::: 39
3.3.8 LAN expansion note
::::::::::::::::::::::::::::: 40
3.4 Expanding the Server Unit
:::::::::::::::::::::::::::::: 41
3.4.1 Adding power supply units
:::::::::::::::::::::::::: 42
3.4.2 Adding CPU modules
::::::::::::::::::::::::::::: 42
3.4.3 Adding memory modules
::::::::::::::::::::::::::: 43
3.4.4 Adding hard disk drives
:::::::::::::::::::::::::::: 43
3.4.5 Adding PCI cards
::::::::::::::::::::::::::::::: 44
ii

CONTENTS
CHAPTER 4 PRIMEPOWER400 Pedestal Server 45
4.1 Overview
:::::::::::::::::::::::::::::::::::::: 46
4.2 Names and Functions of Parts
:::::::::::::::::::::::::::: 47
4.2.1 Front side
::::::::::::::::::::::::::::::::::: 47
4.2.2 Control panel
::::::::::::::::::::::::::::::::: 48
4.2.3 Rear side
::::::::::::::::::::::::::::::::::: 51
4.3 Preparations for Use
::::::::::::::::::::::::::::::::: 52
4.3.1 Installation notes
::::::::::::::::::::::::::::::: 52
4.3.2 Installation specifications
::::::::::::::::::::::::::: 53
4.3.3 Connecting the console
:::::::::::::::::::::::::::: 55
4.3.4 Turning the power on
::::::::::::::::::::::::::::: 55
4.3.5 Turning the power off
::::::::::::::::::::::::::::: 57
4.3.6 Installing the Enhanced Support Facility package
::::::::::::::: 58
4.3.7 How to enable/disable the break signal
:::::::::::::::::::: 59
4.3.8 LAN expansion note
::::::::::::::::::::::::::::: 60
4.4 Expanding the Server Unit
:::::::::::::::::::::::::::::: 61
4.4.1 Adding power supply units
:::::::::::::::::::::::::: 62
4.4.2 Adding CPU modules
::::::::::::::::::::::::::::: 63
4.4.3 Adding memory modules
::::::::::::::::::::::::::: 63
4.4.4 Adding hard disk drives
:::::::::::::::::::::::::::: 64
4.4.5 Adding PCI cards
::::::::::::::::::::::::::::::: 65
CHAPTER 5 PRIMEPOWER400 Rackmount (4U) Server 67
5.1 Overview
:::::::::::::::::::::::::::::::::::::: 68
5.2 Names and Functions of Parts
:::::::::::::::::::::::::::: 68
5.2.1 Front side
::::::::::::::::::::::::::::::::::: 69
5.2.2 Control panel
::::::::::::::::::::::::::::::::: 69
5.2.3 Rear side
::::::::::::::::::::::::::::::::::: 72
iii

5.3 Preparations for Use ::::::::::::::::::::::::::::::::: 73
5.3.1 Installation notes
::::::::::::::::::::::::::::::: 73
5.3.2 Installation specifications
::::::::::::::::::::::::::: 75
5.3.3 Connecting the console
:::::::::::::::::::::::::::: 76
5.3.4 Turning the power on
::::::::::::::::::::::::::::: 77
5.3.5 Turning the power off
::::::::::::::::::::::::::::: 78
5.3.6 Installing the Enhanced Support Facility package
::::::::::::::: 80
5.3.7 How to enable/disable the break signal
:::::::::::::::::::: 80
5.3.8 LAN expansion note
::::::::::::::::::::::::::::: 81
5.4 Expanding the Server Unit
:::::::::::::::::::::::::::::: 82
5.4.1 Adding power supply units
:::::::::::::::::::::::::: 84
5.4.2 Adding CPU modules
::::::::::::::::::::::::::::: 85
5.4.3 Adding memory modules
::::::::::::::::::::::::::: 86
5.4.4 Adding hard disk drives
:::::::::::::::::::::::::::: 86
5.4.5 Adding PCI cards
::::::::::::::::::::::::::::::: 87
CHAPTER 6 PRIMEPOWER400 Rackmount (10U) Server 89
6.1 Overview
:::::::::::::::::::::::::::::::::::::: 90
6.2 Names and Functions of Parts
:::::::::::::::::::::::::::: 91
6.2.1 Front side
::::::::::::::::::::::::::::::::::: 91
6.2.2 Control panel
::::::::::::::::::::::::::::::::: 92
6.2.3 Rear side
::::::::::::::::::::::::::::::::::: 94
6.3 Preparations for Use
::::::::::::::::::::::::::::::::: 96
6.3.1 Installation notes
::::::::::::::::::::::::::::::: 96
6.3.2 Installation specifications
::::::::::::::::::::::::::: 99
6.3.3 Connecting the console
:::::::::::::::::::::::::::: 100
6.3.4 Turning the power on
::::::::::::::::::::::::::::: 101
6.3.5 Turning the power off
::::::::::::::::::::::::::::: 103
iv

CONTENTS
6.3.6 Installing the Enhanced Support Facility package ::::::::::::::: 104
6.3.7 How to enable/disable the break signal
:::::::::::::::::::: 105
6.3.8 LAN expansion note
::::::::::::::::::::::::::::: 106
6.4 Expanding the Server Unit
:::::::::::::::::::::::::::::: 107
6.4.1 Adding power supply units
:::::::::::::::::::::::::: 110
6.4.2 Adding CPU modules
::::::::::::::::::::::::::::: 111
6.4.3 Adding memory modules
::::::::::::::::::::::::::: 111
6.4.4 Adding hard disk drives
:::::::::::::::::::::::::::: 112
6.4.5 Adding PCI cards
::::::::::::::::::::::::::::::: 113
CHAPTER 7 PRIMEPOWER600 Pedestal Server 115
7.1 Overview
:::::::::::::::::::::::::::::::::::::: 116
7.2 Names and Functions of Parts
:::::::::::::::::::::::::::: 117
7.2.1 Front side
::::::::::::::::::::::::::::::::::: 117
7.2.2 Control panel
::::::::::::::::::::::::::::::::: 118
7.2.3 Rear side
::::::::::::::::::::::::::::::::::: 121
7.3 Preparations for Use
::::::::::::::::::::::::::::::::: 122
7.3.1 Installation notes
::::::::::::::::::::::::::::::: 122
7.3.2 Installation specifications
::::::::::::::::::::::::::: 124
7.3.3 Connecting the console
:::::::::::::::::::::::::::: 126
7.3.4 Turning the power on
::::::::::::::::::::::::::::: 126
7.3.5 Turning the power off
::::::::::::::::::::::::::::: 128
7.3.6 Installing the Enhanced Support Facility package
::::::::::::::: 129
7.3.7 How to enable/disable the break signal
:::::::::::::::::::: 130
7.3.8 LAN expansion note
::::::::::::::::::::::::::::: 131
7.4 Expanding the Server Unit
:::::::::::::::::::::::::::::: 132
7.4.1 Adding power supply units
:::::::::::::::::::::::::: 134
7.4.2 Adding CPU modules
::::::::::::::::::::::::::::: 135
v

7.4.3 Adding memory modules ::::::::::::::::::::::::::: 135
7.4.4 Adding hard disk drives
:::::::::::::::::::::::::::: 136
7.4.5 Adding PCI cards
::::::::::::::::::::::::::::::: 137
CHAPTER 8 PRIMEPOWER600 Rackmount (10U) Server 139
8.1 Overview
:::::::::::::::::::::::::::::::::::::: 140
8.2 Names and Functions of Parts
:::::::::::::::::::::::::::: 141
8.2.1 Front side
::::::::::::::::::::::::::::::::::: 141
8.2.2 Control panel
::::::::::::::::::::::::::::::::: 142
8.2.3 Rear side
::::::::::::::::::::::::::::::::::: 144
8.3 Preparations for Use
::::::::::::::::::::::::::::::::: 146
8.3.1 Installation notes
::::::::::::::::::::::::::::::: 146
8.3.2 Installation specifications
::::::::::::::::::::::::::: 148
8.3.3 Connecting the console
:::::::::::::::::::::::::::: 149
8.3.4 Turning the power on
::::::::::::::::::::::::::::: 150
8.3.5 Turning the power off
::::::::::::::::::::::::::::: 151
8.3.6 Installing the Enhanced Support Facility package
::::::::::::::: 152
8.3.7 How to enable/disable the break signal
:::::::::::::::::::: 153
8.3.8 LAN expansion note
::::::::::::::::::::::::::::: 154
8.4 Expanding the Server Unit
:::::::::::::::::::::::::::::: 155
8.4.1 Adding power supply units
:::::::::::::::::::::::::: 158
8.4.2 Adding CPU modules
::::::::::::::::::::::::::::: 158
8.4.3 Adding memory modules
::::::::::::::::::::::::::: 160
8.4.4 Adding hard disk drives
:::::::::::::::::::::::::::: 160
8.4.5 Adding PCI cards
::::::::::::::::::::::::::::::: 162
CHAPTER 9 Expansion Disk Cabinet 165
9.1 Overview
:::::::::::::::::::::::::::::::::::::: 166
vi

CONTENTS
9.2 Names and Functions of Parts :::::::::::::::::::::::::::: 166
9.2.1 Front side
::::::::::::::::::::::::::::::::::: 167
9.2.2 Rear side
::::::::::::::::::::::::::::::::::: 169
9.3 Preparations for Use
::::::::::::::::::::::::::::::::: 171
9.3.1 Installation notes
::::::::::::::::::::::::::::::: 171
9.3.2 Installation specifications
::::::::::::::::::::::::::: 172
9.4 Disk Drive Configuration
::::::::::::::::::::::::::::::: 174
9.5 Hot-swapping Redundant Components
:::::::::::::::::::::::: 175
9.5.1 Power supply units
:::::::::::::::::::::::::::::: 175
9.5.2 Hard disk drives
::::::::::::::::::::::::::::::: 176
CHAPTER 10 Expansion File Unit Type-2 177
10.1 Overview
:::::::::::::::::::::::::::::::::::::: 178
10.2 Names and Functions of Parts
:::::::::::::::::::::::::::: 178
10.2.1 Front side
::::::::::::::::::::::::::::::::::: 178
10.2.2 Rear side
::::::::::::::::::::::::::::::::::: 179
10.3 Preparations for Use
::::::::::::::::::::::::::::::::: 180
10.3.1 Installation notes
::::::::::::::::::::::::::::::: 180
10.3.2 Installation specifications
::::::::::::::::::::::::::: 182
10.4 Disk Drive Configurations
:::::::::::::::::::::::::::::: 182
10.5 Hot-swapping Redundant Components
:::::::::::::::::::::::: 183
10.5.1 Power supply units
:::::::::::::::::::::::::::::: 183
10.5.2 Hard disk drives
::::::::::::::::::::::::::::::: 184
CHAPTER 11 Internal I/O Units 185
11.1 Hard Disk Drives
::::::::::::::::::::::::::::::::::: 186
11.1.1 SCSI ID
::::::::::::::::::::::::::::::::::: 186
11.1.2 Handling precautions
::::::::::::::::::::::::::::: 186
vii

11.1.3 Formatting hard disk drives :::::::::::::::::::::::::: 186
11.1.4 Backing up data
::::::::::::::::::::::::::::::: 187
11.1.5 Hot-swapping hard disk drives
:::::::::::::::::::::::: 187
11.2 CD-ROM Drive
::::::::::::::::::::::::::::::::::: 188
11.2.1 Names and functions of parts
::::::::::::::::::::::::: 188
11.2.2 CD-ROM discs
:::::::::::::::::::::::::::::::: 189
11.2.3 CD-ROM disc handling precautions
:::::::::::::::::::::: 189
11.2.4 Inserting a CD-ROM disc
::::::::::::::::::::::::::: 190
11.2.5 Ejecting a CD-ROM disc
::::::::::::::::::::::::::: 190
11.3 DAT Drive (DDS3)
:::::::::::::::::::::::::::::::::: 191
11.3.1 Names and functions of parts
::::::::::::::::::::::::: 191
11.3.2 SCSI ID
::::::::::::::::::::::::::::::::::: 192
11.3.3 OS settings
:::::::::::::::::::::::::::::::::: 193
11.3.4 Data cartridges
:::::::::::::::::::::::::::::::: 194
11.3.5 Data cartridge handling precautions
:::::::::::::::::::::: 195
11.3.6 Write-protecting a data cartridge
::::::::::::::::::::::: 196
11.3.7 Loading a data cartridge
::::::::::::::::::::::::::: 196
11.3.8 Ejecting a data cartridge
::::::::::::::::::::::::::: 196
11.3.9 Cleaning the tape heads
:::::::::::::::::::::::::::: 197
11.4 DAT Drive (DDS4)
:::::::::::::::::::::::::::::::::: 198
11.4.1 Names and functions of parts
::::::::::::::::::::::::: 198
11.4.2 SCSI ID
::::::::::::::::::::::::::::::::::: 199
11.4.3 OS settings
:::::::::::::::::::::::::::::::::: 200
11.4.3.1 PRIMEPOWER200 Non-Pedestal Servers
:::::::::::::::::: 200
11.4.3.2 PRIMEPOWER200 Pedestal Servers
::::::::::::::::::::: 201
11.4.4 Data cartridges
:::::::::::::::::::::::::::::::: 203
11.4.5 Data cartridge handling precautions
:::::::::::::::::::::: 204
11.4.6 Write-protecting a data cartridge
::::::::::::::::::::::: 205
11.4.7 Loading a data cartridge
::::::::::::::::::::::::::: 205
viii