Fujitsu PRIMEQUEST 1000 Series Service manual

C122-E110-10EN
FUJITSU Server
PRIMEQUEST 1000
Series
Tool Reference

Preface
This manual provides information on operation methods and settings, including details on the MMB, PSA, and EFI
functions. The manual is intended for system administrators.
For details on the regulatory compliance statements and safety precautions, see the PRIMEQUEST 1000 Series
Safety and Regulatory Information (C122-E115XA).
Errata and addenda for the manual
The PRIMEQUEST 1000 Series Errata and Addenda (C122-E119EN) provides errata and addenda for the manual.
Read the PRIMEQUEST 1000 Series Errata and Addenda (C122-E119EN) thoroughly in reference to the manual.
For Safe Operation
How to use this manual
This manual contains important information about the safe use of this product. Read the manual thoroughly to
understand the information in it before using this product. Be sure to keep this manual in a safe and convenient
location for quick reference.
Fujitsu makes every effort to prevent users and bystanders from being injured and to prevent property damage. Be
sure to use the product according to the instructions in the manual.
About this product
This product is designed and manufactured for standard applications. Such applications include, but are not limited
to, general office work, personal and home use, and general industrial use. The product is not intended for
applications that require extremely high levels of safety to be guaranteed (referred to below as "safety-critical"
applications). Use of the product for a safety-critical application may present a significant risk of personal injury
and/or death. Such applications include, but are not limited to, nuclear reactor control, aircraft flight control, air
traffic control, mass transit control, medical life support, and missile launch control. Customers shall not use the
product for a safety-critical application without guaranteeing the required level of safety. Customers who plan to
use the product in a safety-critical system are requested to consult the Fujitsu sales representatives in charge.
Storage of accessories
Keep the accessories in a safe place because they are required for server operations.
Organization and Notation of This Manual
This section describes the following topics:
-Organization of this manual
-Manuals for the PRIMEQUEST 1000 series
-Related manuals
-Abbreviations
-Notation
-Notation for the CLI (command line interface)
-Notes on notations
-Alert messages
-Product operating environment
-Trademarks
PRIMEQUEST 1000 Series Tool Reference
Preface
i C122-E110-10EN

Organization of this manual
This manual is organized as follows.
CHAPTER 1 MMB Web-UI (Web User Interface) Operations
Chapter 1 describes the menus used to manage and operate the PRIMEQUEST 1000 series server with the
MMB Web-UI. It also describes how to use the MMB Web-UI.
CHAPTER 2 MMB CLI (Command Line Interface) Operations
Chapter 2 describes the CLI (command line interface) provided by the MMB.
CHAPTER 3 PSA Web-UI (Web User Interface) Operations
Chapter 3 lists the menus used to operate PSA with the MMB Web-UI. It also describes the window and
menu operations for PSA operations.
CHAPTER 4 PSA CLI (Command Line Interface) Operations
Chapter 4 describes the commands for operating PSA from the CLI.
CHAPTER 5 UEFI Menu Operations
Chapter 5 describes the menu operations of the UEFI.
CHAPTER 6 UEFI Command Operations
Chapter 6 describes the command operations of the UEFI.
APPENDIX A Lists of Settings
Appendix A lists the setting items for each window.
Index
The index lists keywords and the pages that they refer to, helping readers quickly find the necessary
information in the manual.
Manuals for the PRIMEQUEST 1000 series
ThefollowingmanualshavebeenpreparedtoprovideyouwiththeinformationnecessarytousethePRIMEQUEST
1000 series.
You can access HTML versions of these manuals at the following sites:
Japanese-language site: http://jp.fujitsu.com/platform/server/primequest/manual/
Global site: http://jp.fujitsu.com/platform/server/primequest/manual-e/
Title Description Manual code
PRIMEQUEST 1000 Series
Getting Started Guide
Describes what manuals you should read and how to
access important information after unpacking the
PRIMEQUEST 1000 series server. (This manual comes
with the product.)
C122-E114XA
PRIMEQUEST 1000 Series
Safety and Regulatory
Information
Contains important information required for using the
PRIMEQUEST 1000 series safely.
C122-E115XA
PRIMEQUEST 1000 Series
Errata and Addenda
Provides errata and addenda for the PRIMEQUEST
1000 series manuals. This manual will be updated as
needed.
C122-E119EN
PRIMEQUEST 1000 Series Tool Reference
Preface
ii C122-E110-10EN

Title Description Manual code
PRIMEQUEST 1000 Series
General Description
Describes the functions and features of the
PRIMEQUEST 1000 series.
C122-B022EN
Fujitsu M10/SPARC M10
Systems/SPARC Enterprise/
PRIMEQUEST Common
Installation Planning
Manual
Provides the necessary information and concepts you
should understand for installation and facility planning
for SPARC M10 Systems, SPARC Enterprise, and
PRIMEQUEST installations.
C120-H007EN
PRIMEQUEST 1000 Series
Hardware Installation
Manual
Includes the specifications of and the installation
location requirements for the PRIMEQUEST 1000
series.
C122-H004EN
PRIMEQUEST 1000 Series
Installation Manual
Describes how to set up the PRIMEQUEST 1000 series
server, including the steps for installation preparation,
initialization, and software installation.
C122-E107EN
PRIMEQUEST 1000 Series
User Interface Operating
Instructions
Describes how to use the Web-UI and UEFI to assure
proper operation of the PRIMEQUEST 1000 series
server.
C122-E109EN
PRIMEQUEST 1000 Series
Administration Manual
Describes how to use tools and software for system
administration and how to maintain the system
(component replacement and error notification).
C122-E108EN
PRIMEQUEST 1000 Series
Tool Reference
Providesinformationonoperationmethodsandsettings,
including details on the MMB, PSA, and UEFI
functions.
C122-E110EN
PRIMEQUEST 1000 Series
Message Reference
Lists the messages that may be displayed when a
problem occurs during operation and describes how to
respond to them.
C122-E111EN
PRIMEQUEST 1000 Series
REMCSInstallationManual
Describes REMCS service installation and operation. C122-E120EN
PRIMEQUEST 1000 Series
Glossary
Defines the PRIMEQUEST 1000 series related terms
and abbreviations.
C122-E116EN
PRIMEQUEST 1000 Series
SAN Boot Environment
Configuration Manual
Gives a revised version of APPENDIX D Configuring
the SAN Boot Environment in the PRIMEQUEST 1000
Series Installation Manual (C122-E107EN). This
manualdescribesprocedures for installing the SANboot
environment and provides the latest information
including notes on design.
C122-E155EN
Related manuals
The following manuals relate to the PRIMEQUEST 1000 series.
You can access these manuals at the following site:
http://jp.fujitsu.com/platform/server/primequest/manual-e/
Contact your sales representative for inquiries about the ServerView manuals.
PRIMEQUEST 1000 Series Tool Reference
Preface
iii C122-E110-10EN

Title Description Manual code
ServerView Suite
ServerView Operations
Manager Quick Installation
(Windows)
Describes how to install and start ServerView
Operations Manager in a Windows environment.
None
ServerView Suite
ServerView Operations
Manager Quick Installation
(Linux)
Describes how to install and start ServerView
Operations Manager in a Linux environment.
None
ServerView Suite
ServerView Installation
Manager
Describes the installation procedure using
ServerView Installation Manager.
None
ServerView Suite
ServerView Operations
Manager Server
Management
Provides an overview of server monitoring using
ServerView Operations Manager, and describes
the user interface of ServerView Operations
Manager.
None
ServerView Suite
ServerView RAID
Management User Manual
Describes RAID management using ServerView
RAID Manager.
None
ServerView Suite
Basic Concepts
Describes basic concepts about ServerView
Suite.
None
ServerView Operations
Manager
Installation ServerView
Agents for Linux
Describes installation and update installation of
ServerView Linux Agent.
None
ServerView Operations
Manager
Installation ServerView
Agents for Windows
Describes installation and update installation of
ServerView Windows Agent.
None
ServerView Mission
Critical Option User
Manual
Describes the necessary functions unique to
PRIMEQUEST (notification via the MMB, hot
replacement command) and ServerView Mission
Critical Option (SVmco), which is required for
supporting these functions.
Also includes explanation of ServerView
Mission Critical Option for VM (SVmcovm)
required for VMware vSphere 5 server monitor.
None
ServerView RAID Manager
VMware vSphere ESXi 5
Installation Guide
Describes the installation and settings required to
use ServerView RAID Manager on the VMware
vSphere ESXi 5 server.
None
PRIMEQUEST 1000 Series Tool Reference
Preface
iv C122-E110-10EN

Title Description Manual code
MegaRAID SAS Software Provides technical information on using array
controllers. Refer to the manual from the SVS-
DVD2 supplied with the product or from the
following URL:
TheFujitsuTechnologySolutionsmanualsserver
http://manuals.ts.fujitsu.com
None
MegaRAID SAS Device
Driver Installation
Provides technical information on using array
controllers. Refer to the manual from the SVS-
DVD2 supplied with the product or from the
following URL:
TheFujitsuTechnologySolutionsmanualsserver
http://manuals.ts.fujitsu.com
None
Modular RAID Controller
Installation Guide
Provides technical information on using array
controllers. Refer to the manual from the SVS-
DVD2 supplied with the product or from the
following URL:
TheFujitsuTechnologySolutionsmanualsserver
http://manuals.ts.fujitsu.com
None
Abbreviations
This manual uses the following product name abbreviations.
Formal product name Abbreviation
Red Hat® Enterprise Linux® 5 (for Intel 64) Linux
RHEL5, RHEL
Red Hat® Enterprise Linux® 5 (for x86)
Red Hat® Enterprise Linux® 6 (for Intel 64) Linux
RHEL6, RHEL
Red Hat® Enterprise Linux® 6 (for x86)
Microsoft® Windows Server® 2003, Standard Edition Windows
Windows Server 2003
Microsoft® Windows Server® 2003, Enterprise Edition
Microsoft® Windows Server® 2003, Datacenter Edition
Microsoft® Windows Server® 2003, Standard x64 Edition
Microsoft® Windows Server® 2003, Enterprise x64 Edition
Microsoft® Windows Server® 2003, Datacenter x64 Edition
Microsoft® Windows Server® 2003 R2, Standard Edition
Microsoft® Windows Server® 2003 R2, Enterprise Edition
Microsoft® Windows Server® 2003 R2, Datacenter Edition
Microsoft® Windows Server® 2003 R2, Standard x64 Edition
PRIMEQUEST 1000 Series Tool Reference
Preface
v C122-E110-10EN

Formal product name Abbreviation
Microsoft® Windows Server® 2003 R2, Enterprise x64 Edition
Microsoft® Windows Server® 2003 R2, Datacenter x64 Edition
Microsoft® Windows Server® 2008 Standard Windows
Windows Server 2008
Microsoft® Windows Server® 2008 Enterprise
Microsoft® Windows Server® 2008 Datacenter
Microsoft® Windows Server® 2008 R2 Standard
Microsoft® Windows Server® 2008 R2 Enterprise
Microsoft® Windows Server® 2008 R2 Datacenter
Microsoft(R) Windows Server(R) 2012 Datacenter Windows
Windows Server 2012
Microsoft(R) Windows Server(R) 2012 Standard
VMware vSphere(R) 4 VMware, vSphere 4.x, VMware
4.x
VMware vSphere(R) 5 VMware, vSphere 5.x, VMware
5.x
VMware(R) ESX(R) 4 ESX, ESX 4.x
VMware(R) ESXi(TM) 5 ESXi, ESXi 5.x
Novell(R) SUSE(R) LINUX Enterprise Server 11 Service Pack 2 SLES11 SP2
Notation
This manual uses the following fonts and symbols to express specific types of information.
Font or
symbol
Meaning Example
italics Title of a manual that you should refer to See the PRIMEQUEST 1000 Series
Installation Manual (C122-E107EN).
[ ] Window names as well as the names of buttons,
tabs, and drop-down menus in windows are
enclosed in brackets.
Click the [OK] button.
Notation for the CLI (command line interface)
The following notation is used for commands.
Command syntax
Command syntax is represented as follows.
- Variables requiring the entry of a value are enclosed in angle brackets < >.
- Optional elements are enclosed in brackets [ ].
- Options for optional keywords are grouped in | (stroke) separated lists enclosed in brackets [ ].
PRIMEQUEST 1000 Series Tool Reference
Preface
vi C122-E110-10EN

- Options for required keywords are grouped in | (stroke) separated lists enclosed in braces { }.
Command syntax is written in a box.
Remarks
The command output shown in the PDF manuals may include line feeds at places where there is no line feed symbol
(\ at the end of the line).
Notes on notations
- In this manual, the Management Board and MMB firmware are abbreviated as "MMB."
- In this manual, IOBs and GSPBs (LIOBs and LGSPBs within partitions) are collectively referred to as IO
Units.
- Screenshots contained in this manual may differ from the actual product screen displays.
-The IP addresses, configuration information, and other such information contained in this manual are display
examples and differ from that for actual operation.
Alert messages
This manual uses the following alert messages to prevent users and bystanders from being injured and to prevent
property damage.
Thisindicates a hazardous situationthat is likelyto resultin death orserious personalinjury
if the user does not perform the procedure correctly.
This indicates a hazardous situation that could result in minor or moderate personal injury
if the user does not perform the procedure correctly. This also indicates that damage to the
product or other property may occur if the user does not perform the procedure correctly.
This indicates information that could help the user use the product more efficiently.
Alert messages in the text
An alert statement follows an alert symbol. An alert statement is indented on both ends to distinguish it from regular
text. Similarly, one space line is inserted before and after the alert statement.
Only Fujitsu certified service engineers should perform the following tasks on this product
and the options provided by Fujitsu. Customers must not perform these tasks under any
circumstances. Otherwise, electric shock, injury, or fire may result.
- Newly installing or moving equipment
- Removing the front, rear, and side covers
- Installing and removing built-in options
- Connecting and disconnecting external interface cables
- Maintenance (repair and periodic diagnosis and maintenance)
The List of important alert items table lists important alert items.
PRIMEQUEST 1000 Series Tool Reference
Preface
vii C122-E110-10EN

Product operating environment
This product is a computer intended for use in a computer room environment. For details on the product operating
environment, see the following manual:
PRIMEQUEST 1000 Series Hardware Installation Manual (C122-H004EN)
Note-If you have a comment or request regarding this manual, or if you find any part of this manual unclear, please
take a moment to share it with us by filling in the form at the following webpage, stating your points
specifically, and sending the form to us:
https://www-s.fujitsu.com/global/contact/computing/PRMQST_feedback.html
- The contents of this manual may be revised without prior notice.
-The PDF file of this manual is intended for display using Adobe® Reader® in single page viewing mode at
100% zoom.
- The PRIMEQUEST 1800E2/1800E model supports only 200 V power supply.
Trademarks
-Microsoft, Windows, and Windows Server are trademarks or registered trademarks of Microsoft Corporation
in the United States and/or other countries.
- Linux is a registered trademark of Linus Torvalds.
- Red Hat, the Shadowman logo and JBoss are registered trademarks of Red Hat, Inc. in the U.S. and other
countries.
- Intel and Xeon are trademarks or registered trademarks of Intel Corporation.
- Ethernet is a registered trademark of Fuji Xerox Co., Ltd. in Japan and is a registered trademark of Xerox
Corp. in the United States and other countries.
- VMware is a trademark or registered trademark of VMware, Inc. in the United States and other countries.
- Novell and SUSE Linux Enterprise Server are trademarks of Novell, Inc.
-Xen is a trademark or registered trademark of Citrix Systems, Inc. or its subsidiaries in the United States and
other countries.
- Other company names and product names are the trademarks or registered trademarks of their respective
owners.
- Trademark indications are omitted for some system and product names in this manual.
Safety Precautions
List of important alert items
This manual does not contain important alert items.
Warning labels
The following warning labels are affixed to this product. These labels are intended for the users of this product.
Never remove the warning labels.
PRIMEQUEST 1000 Series Tool Reference
Preface
viii C122-E110-10EN

* The label is affixed at either location.
Warning label location (PRIMEQUEST 1800E2/1800E rear)
Warning label location (PRIMEQUEST 1800E2/1800E rear) (IOBs removed)
PRIMEQUEST 1000 Series Tool Reference
Preface
ix C122-E110-10EN

Warning label location (PCI_Box)
Notes on Handling the Product
Adding optional products
For stable operation of the PRIMEQUEST 1000 series server, use only a Fujitsu certified product as an added
option.
Note that the PRIMEQUEST 1000 series server is not guaranteed to operate with any optional product not certified
by Fujitsu.
Maintenance
Only Fujitsu certified service engineers should perform the following tasks on this
product and the options provided by Fujitsu. Customers must not perform these tasks
under any circumstances. Otherwise, electric shock, injury, or fire may result.
- Newly installing or moving equipment
- Removing the front, rear, and side covers
- Installing and removing built-in options
- Connecting and disconnecting external interface cables
- Maintenance (repair and periodic diagnosis and maintenance)
Only Fujitsu certified service engineers should perform the following tasks on this
product and the options provided by Fujitsu. Customers must not perform these tasks
under any circumstances. Otherwise, product failure may result.
PRIMEQUEST 1000 Series Tool Reference
Preface
x C122-E110-10EN

- Unpacking an optional Fujitsu product, such as an optional adapter, delivered to
the customer
Modifying or recycling the product
Modifyingthisproductorrecycling a secondhand product by overhauling it withoutprior
approvalmay resultinpersonalinjury tousersand/orbystanders or damagetotheproduct
and/or other property.
Noteon erasingdatafrom harddisks whendisposing oftheproduct ortransferring
itDisposing of this product or transferring it as is may enable third parties to access the data on the hard disk and use
it for unforeseen purposes. To prevent the leakage of confidential information and important data, all of the data
on the hard disk must be erased before disposal or transfer of the product.
However, it can be difficult to completely erase all of the data from the hard disk. Simply initializing (reformatting)
the hard disk or deleting files on the operating system is insufficient to erase the data, even though the data appears
ata glance to have beenerased. This typeof operation onlymakes it impossibleto access thedata from theoperating
system. Malicious third parties can restore this data.
If you save your confidential information or other important data on the hard disk, you should completely erase the
data, instead of simply carrying out the aforementioned operation, to prevent the data from being restored.
To prevent important data on the hard disk from being leaked when the product is disposed of or transferred, you
will need to take care to erase all the data recorded on the hard disk on your own responsibility.
Furthermore, if a software license agreement restricts the transfer of the software (operating system and application
software) on the hard disk in the server or other product to a third party, transferring the product without deleting
the software from the hard disk may violate the agreement. Adequate verification from this point of view is also
necessary.
Support and service
SupportDesk (available only in Japan, for a fee)
Forstable systemoperation,werecommend concludingourSupportDeskagreement, whichprovidesa maintenance
andoperationsupportservice.SupportDeskagreementcustomersreceivea same-day response service for hardware
problems. They are eligible for regular checkups, remote notification of potential-failure predictions, and
information on system problems. Moreover, they can avail themselves of other services such as troubleshooting
supportby phone forhardwareandsoftwareproblems, and accesstooperationsupport information fromadedicated
website for our customers. For details, see "Product support" on the SupportDesk homepage (http://jp.fujitsu.com/
solutions/support/sdk/index.html).
Product and service inquiries
For all product use and technical inquiries, contact the distributor where you purchased your product, or a Fujitsu
salesrepresentative or systems engineer(SE). Ifyou donot knowthe appropriatecontact addressfor inquiriesabout
the PRIMEQUEST 1000 series, use the Fujitsu contact line.
Fujitsu contact line
We accept Web inquiries. For details, visit our website:
PRIMEQUEST 1000 Series Tool Reference
Preface
xi C122-E110-10EN

https://www-s.fujitsu.com/global/contact/computing/PRMQST_feedback.html
Warranty
If a component failure occurs during the warranty period, we will repair it free of charge in accordance with the
terms of the warranty agreement. For details, see the warranty.
Before requesting a repair
If a problem occurs with the product, confirm the problem by referring to 11.2 Troubleshooting in the
PRIMEQUEST 1000 Series Administration Manual (C122-E108EN). If the error recurs, contact your sales
representative or a field engineer. Confirm the model name and serial number shown on the label affixed to the
right front of the device and report it. Also check any other required items beforehand according to 11.2
Troubleshooting in the PRIMEQUEST 1000 Series Administration Manual (C122-E108EN). The system settings
saved by the customer will be used during maintenance.
Revision History
Edition Date Revised location (type) (*) Description
01 2010-02-09 - -
02 2010-03-12 All pages Incorporated differences in Errata and
Addenda (C122-E119-01EN)
03 2010-08-20 All pages
Incorporated differences in Errata and
Addenda (C122-E119-02EN to C122-
E119-10EN)
04 2011-04-28 All pages
- Added items about 1800E2
- Incorporated differences in
Errata and Addenda (C122-
E119-11EN to C122-
E119-18EN)
05 2011-05-31 All pages Incorporated differences in Errata and
Addenda (C122- E119-19EN)
06 2011-12-20 All pages
Incorporated differences in Errata and
Addenda (C122- E119-20EN to C122-
E119-24EN)
07 2012-04-03 Chapter 5 Added items about SR-IOV
08 2013-01-25 All pages
- Incorporated differences in
Errata and Addenda (C122-
E119-27EN to C122-
E119-30EN)
- Added items about Windows
Server 2012
- Applied changes to DIMM
capacity
PRIMEQUEST 1000 Series Tool Reference
Preface
xii C122-E110-10EN

Edition Date Revised location (type) (*) Description
09 2013-07-02 Chapter 5
- Updated descriptions about
[Configure Memory] menu
- Added Boot order after GSPB
replacement
10 2013-11-19 Chapter 1 Updated descriptions about [Schedule
List] window
* Chapter, section, and item numbers in the "Revised location" column refer to those in the latest edition of the
document. However, a number marked with an asterisk (*) denotes a chapter, section, or item in a previous edition
of the document.
This manual shall not be reproduced or copied without the permission of Fujitsu Limited.
Copyright 2010 - 2013 FUJITSU LIMITED
PRIMEQUEST 1000 Series Tool Reference
Preface
xiii C122-E110-10EN

PRIMEQUEST 1000 Series Tool Reference
Preface
xiv C122-E110-10EN

Contents
CHAPTER 1 MMB Web-UI (Web User Interface) Operations ........................................................................... 1
1.1 Web-UI Menus .......................................................................................................................................... 2
1.1.1 Web-UI menus (Administrator) ............................................................................................................ 2
1.1.2 Web-UI menus (Operator) ................................................................................................................... 8
1.1.3 Web-UI menus (Partition Operator) ................................................................................................... 14
1.1.4 Web-UI menus (User) ........................................................................................................................ 22
1.1.5 Web-UI menus (CE) .......................................................................................................................... 28
1.1.6 Web-UI menus in maintenance mode ............................................................................................... 34
1.1.7 Web-UI menus in maintenance mode (Administrator) ....................................................................... 35
1.1.8 Web-UI menus in maintenance mode (Operator) .............................................................................. 38
1.1.9 Web-UI menus in maintenance mode (Partition Operator) ............................................................... 42
1.1.10 Web-UI menus in maintenance mode (User) .................................................................................. 46
1.1.11 Web-UI menus in maintenance mode (CE) ..................................................................................... 49
1.1.12 Web-UI menus in maintenance mode (maintenance personnel) .................................................... 53
1.2 [System] Menu ........................................................................................................................................ 58
1.2.1 [System Status] window .................................................................................................................... 58
1.2.2 [System Event Log] window .............................................................................................................. 60
1.2.3 [Operation Log] window ..................................................................................................................... 65
1.2.4 [Partition Event Log] window ............................................................................................................. 69
1.2.5 [System Information] window ............................................................................................................. 73
1.2.6 [Firmware Information] window .......................................................................................................... 75
1.2.7 [System Setup] window ..................................................................................................................... 77
1.2.8 [System Power Control] window ........................................................................................................ 79
1.2.9 [LEDs] window ................................................................................................................................... 81
1.2.10 [Power Supply] window ................................................................................................................... 82
1.2.11 [Fans] window .................................................................................................................................. 84
1.2.12 [Temperature] window ..................................................................................................................... 86
1.2.13 [SB] menu ........................................................................................................................................ 87
1.2.14 [IOB] menu ...................................................................................................................................... 96
1.2.15 [GSPB] menu ................................................................................................................................. 100
1.2.16 [SASU] menu ................................................................................................................................. 103
1.2.17 [PCI_Box] menu ............................................................................................................................ 106
1.2.18 [Other Boards] menu ..................................................................................................................... 112
1.2.19 [MMB] menu .................................................................................................................................. 114
1.3 [Partition] Menu ..................................................................................................................................... 117
1.3.1 [Power Control] window ................................................................................................................... 117
1.3.2 [Schedule] menu .............................................................................................................................. 122
1.3.3 [DVD Switch] window ...................................................................................................................... 129
1.3.4 [Partition Configuration] window ...................................................................................................... 132
1.3.5 [Reserved SB Configuration] window .............................................................................................. 139
1.3.6 [Console Redirection Setup] window ............................................................................................... 141
1.3.7 [Partition#x] menu ............................................................................................................................ 145
1.4 [User Administration] Menu .................................................................................................................. 153
1.4.1 [User List] window ........................................................................................................................... 153
1.4.2 [Change Password] window ............................................................................................................ 158
1.4.3 [Who] window .................................................................................................................................. 159
1.5 [Network Configuration] Menu .............................................................................................................. 161
1.5.1 [Date/Time] window ......................................................................................................................... 161
1.5.2 [Network Interface] window ............................................................................................................. 164
1.5.3 [Management LAN Port Configuration] window .............................................................................. 171
1.5.4 [Network Protocols] window ............................................................................................................ 173
1.5.5 [Refresh Rate] window .................................................................................................................... 176
1.5.6 [SNMP Configuration] menu ............................................................................................................ 177
1.5.7 [SSL] menu ...................................................................................................................................... 183
1.5.8 [SSH] menu ..................................................................................................................................... 190
1.5.9 [Remote Server Management] window ........................................................................................... 192
PRIMEQUEST 1000 Series Tool Reference
Contents
xv C122-E110-10EN

1.5.10 [Access Control] window ............................................................................................................... 195
1.5.11 [Alarm E-Mail] window ................................................................................................................... 199
1.6 [Maintenance] Menu ............................................................................................................................. 204
1.6.1 [Firmware Update] menu ................................................................................................................. 204
1.6.2 [Backup/Restore Configuration] menu ............................................................................................ 205
1.6.3 [Maintenance Wizard] window ......................................................................................................... 209
1.6.4 [REMCS] menu ................................................................................................................................ 209
CHAPTER 2 MMB CLI (Command Line Interface) Operations ..................................................................... 211
2.1 Basic Operations with the CLI .............................................................................................................. 212
2.1.1 Access to the CLI via the serial interface ........................................................................................ 212
2.1.2 Access via the management LAN interface .................................................................................... 212
2.1.3 CLI command list ............................................................................................................................. 212
2.2 Setting Commands ............................................................................................................................... 227
2.2.1 add partition ..................................................................................................................................... 227
2.2.2 clear access_control ........................................................................................................................ 229
2.2.3 clear ssh_key ................................................................................................................................... 229
2.2.4 download ssh_key ........................................................................................................................... 230
2.2.5 power off .......................................................................................................................................... 230
2.2.6 power on .......................................................................................................................................... 232
2.2.7 reset ................................................................................................................................................. 233
2.2.8 nmi ................................................................................................................................................... 234
2.2.9 remove partition ............................................................................................................................... 235
2.2.10 set active_mmb ............................................................................................................................. 236
2.2.11 set date .......................................................................................................................................... 237
2.2.12 set gateway ................................................................................................................................... 238
2.2.13 set gateway_ipv6 ........................................................................................................................... 238
2.2.14 set hostname ................................................................................................................................. 239
2.2.15 set http ........................................................................................................................................... 240
2.2.16 set http_port ................................................................................................................................... 240
2.2.17 set https ......................................................................................................................................... 241
2.2.18 set https_port ................................................................................................................................. 241
2.2.19 set ip .............................................................................................................................................. 242
2.2.20 set ipv6 .......................................................................................................................................... 242
2.2.21 set maintenance_ip ....................................................................................................................... 243
2.2.22 set partition home .......................................................................................................................... 244
2.2.23 set partition mirror_mode ............................................................................................................... 245
2.2.24 set partition name .......................................................................................................................... 247
2.2.25 set ssh ........................................................................................................................................... 248
2.2.26 set ssh_port ................................................................................................................................... 249
2.2.27 set telnet ........................................................................................................................................ 249
2.2.28 set telnet_port ................................................................................................................................ 250
2.2.29 set timezone .................................................................................................................................. 250
2.3 Display Commands ............................................................................................................................... 252
2.3.1 show access_control ....................................................................................................................... 252
2.3.2 show active_mmb ............................................................................................................................ 253
2.3.3 show date ........................................................................................................................................ 253
2.3.4 show exit_code ................................................................................................................................ 254
2.3.5 show partition configuration ............................................................................................................. 254
2.3.6 show partition home ........................................................................................................................ 256
2.3.7 show partition name ........................................................................................................................ 257
2.3.8 show partition mirror_mode ............................................................................................................. 257
2.3.9 show timezone ................................................................................................................................. 258
2.3.10 show gateway ................................................................................................................................ 258
2.3.11 showgateway_ipv6 ........................................................................................................................ 259
2.3.12 show http ....................................................................................................................................... 259
2.3.13 show http_port ............................................................................................................................... 260
2.3.14 show https ..................................................................................................................................... 260
PRIMEQUEST 1000 Series Tool Reference
Contents
xvi C122-E110-10EN

2.3.15 show https_port ............................................................................................................................. 260
2.3.16 show ip .......................................................................................................................................... 261
2.3.17 showipv6 ........................................................................................................................................ 261
2.3.18 show hostname ............................................................................................................................. 262
2.3.19 show maintenance_ip .................................................................................................................... 262
2.3.20 show ssh ........................................................................................................................................ 263
2.3.21 show ssh_port ............................................................................................................................... 263
2.3.22 show telnet .................................................................................................................................... 263
2.3.23 show telnet_port ............................................................................................................................ 264
2.3.24 show network ................................................................................................................................. 264
2.3.25 show ntpq ...................................................................................................................................... 265
2.3.26 who ................................................................................................................................................ 267
2.3.27 help ................................................................................................................................................ 268
2.3.28 netck traceroute ............................................................................................................................. 273
2.3.29 netck arptbl .................................................................................................................................... 273
2.3.30 netck arping ................................................................................................................................... 274
2.3.31 netck ifconfig .................................................................................................................................. 275
2.3.32 netck stat ....................................................................................................................................... 275
2.4 Update Commands ............................................................................................................................... 277
2.4.1 update ALL ...................................................................................................................................... 277
2.4.2 show update_status ......................................................................................................................... 278
2.5 Other Commands ................................................................................................................................. 280
2.5.1 exit ................................................................................................................................................... 280
2.5.2 passwd ............................................................................................................................................ 280
2.5.3 ping .................................................................................................................................................. 281
CHAPTER 3 PSA Web-UI (Web User Interface) Operations ........................................................................ 283
3.1 Basic PSA Operations .......................................................................................................................... 284
3.2 PSA Web-UI Menus .............................................................................................................................. 286
3.2.1 PSA Web-UI menus (Administrator) ................................................................................................ 286
3.2.2 PSA Web-UI menus (Operator) ....................................................................................................... 287
3.2.3 PSA Web-UI menus (Partition Operator) ......................................................................................... 288
3.2.4 PSA Web-UI menus (User) ............................................................................................................. 290
3.2.5 PSA Web-UI menus (CE) ................................................................................................................ 291
3.3 [Partition Information] Window .............................................................................................................. 293
3.4 [CPUs] Window ..................................................................................................................................... 295
3.5 [DIMMs] Window ................................................................................................................................... 296
3.6 [PCI Devices] Window .......................................................................................................................... 297
3.6.1 [Ethernet Controller] window ........................................................................................................... 298
3.6.2 [Storage Controller] window ............................................................................................................ 303
3.6.3 [RAID Controller] window ................................................................................................................ 307
3.6.4 [Fibre Channel] window ................................................................................................................... 309
3.7 [Network] Menu ..................................................................................................................................... 315
3.7.1 [IPv4 Interfaces] window .................................................................................................................. 315
3.7.2 [IPv6 Interfaces] window .................................................................................................................. 317
3.8 [Hard Disks] Window ............................................................................................................................ 320
3.9 [Hardware Inventory] Window ............................................................................................................... 322
3.10 [Agent Log] Window ............................................................................................................................ 324
3.10.1 [Agent Log Filtering Condition] window ......................................................................................... 326
3.11 [Export List] Window ........................................................................................................................... 330
3.11.1 [Export] window ............................................................................................................................. 332
3.12 [PSA Logs Download] Window ........................................................................................................... 335
3.12.1 [PSA Logs Download] window ..................................................................................................... 336
3.12.2 [PSA Logs Download -Status-] window ......................................................................................... 337
3.12.3 [PSA Logs Download -Result-] window ......................................................................................... 339
CHAPTER 4 PSA CLI (Command Line Interface) Operations ....................................................................... 341
4.1 Basic Operations with the CLI .............................................................................................................. 342
PRIMEQUEST 1000 Series Tool Reference
Contents
xvii C122-E110-10EN

4.1.1 CLI command list ............................................................................................................................. 342
4.2 Disk Management Command (diskctrl) ................................................................................................. 344
4.3 PSA Start/Stop Command (y30FJSVpsa) ............................................................................................ 349
4.4 Command for Collecting PSA Data for Investigation (getopsa) ............................................................ 351
4.5 Filter Definition Update Commands (fltcpy, fltupdate) .......................................................................... 352
4.6 Local Partition Number Acquisition Command (getpartid) .................................................................... 355
4.7 Serial Number Acquisition Command (getserialno) .............................................................................. 356
4.8 SNMP Security Setting Command (setsnmpsec) ................................................................................. 357
4.9 Firmware Information Acquisition Command (getfwinfo) ...................................................................... 358
4.10 PCI Card Operation Command (fjpciswap) ........................................................................................ 360
4.11 Firewall Setting Command for the Management LAN Interface (setmlanfw.sh) ................................. 363
4.12 PSA-MMB Communication LAN Setting Command (setpsalan) ......................................................... 367
CHAPTER 5 UEFI Menu Operations ............................................................................................................. 369
5.1 Screen Transitions (from the Boot Manager Front Page) ..................................................................... 370
5.2 Boot Manager Front Page .................................................................................................................... 375
5.2.1 Screen areas ................................................................................................................................... 375
5.3 [Continue] Menu ................................................................................................................................... 378
5.4 [Boot Manager] Menu ........................................................................................................................... 379
5.4.1 Boot options ..................................................................................................................................... 379
5.4.2 Overview of UEFI boot specifications .............................................................................................. 381
5.4.3 Overview of legacy BIOS boot specifications .................................................................................. 387
5.4.4 Boot process .................................................................................................................................... 392
5.5 [Device Manager] Menu ........................................................................................................................ 398
5.5.1 [Configure I/O Space Assignment] menu ........................................................................................ 400
5.5.2 [Configure LAN Remote Boot] menu ............................................................................................... 405
5.5.3 [Configure CPU] menu .................................................................................................................... 413
5.5.4 [Configure PCI Bus Padding] menu ................................................................................................ 418
5.5.5 [iSCSI Configuration] menu ............................................................................................................. 422
5.5.6 [Configure Memory] menu .............................................................................................................. 428
5.5.7 [Configure SR-IOV] menu ................................................................................................................ 431
5.6 [Boot Maintenance Manager] Menu ...................................................................................................... 436
5.6.1 [Boot Options] menu ........................................................................................................................ 437
5.6.2 [Boot From File] menu ..................................................................................................................... 490
5.6.3 [Set Boot Delay Time] menu ............................................................................................................ 494
5.7 Device Path .......................................................................................................................................... 499
5.7.1 Device path parameters .................................................................................................................. 499
5.7.2 Identifying the device path ............................................................................................................... 500
CHAPTER 6 UEFI Command Operations ..................................................................................................... 507
6.1 UEFI Shell and UEFI Commands ......................................................................................................... 508
6.1.1 Automatic startup file ....................................................................................................................... 508
6.1.2 UEFI shell command syntax ............................................................................................................ 508
6.1.3 Output redirection ............................................................................................................................ 509
6.1.4 UEFI shell command list .................................................................................................................. 510
APPENDIX A Lists of Settings ....................................................................................................................... 513
A.1 MMB Web-UI Settings .......................................................................................................................... 514
A.1.1 Setting items in the [System Event Log Filtering Condition] window .............................................. 514
A.1.2 Setting items in the [Operation Log Filtering Condition] window ..................................................... 515
A.1.3 Setting items in the [System Information] window ........................................................................... 516
A.1.4 Setting items in the [System Setup] window ................................................................................... 517
A.1.5 Setting items in the [System Power Control] window ...................................................................... 517
A.1.6 Setting items in the [Power Control] window ................................................................................... 518
A.1.7 Setting items in the [Schedule Control] window .............................................................................. 518
A.1.8 Setting items in the [Add Schedule]/[Edit Schedule] window .......................................................... 519
A.1.9 Setting items in the [Partition Configuration] window ...................................................................... 519
A.1.10 Setting items in the [Console Redirection Setup] window ............................................................. 520
A.1.11 Setting items in the [ASR Control] window .................................................................................... 520
PRIMEQUEST 1000 Series Tool Reference
Contents
xviii C122-E110-10EN