Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.1... User manual

J2X1-7611-05ENZ0(03)
March 2013
Windows/Linux
ServerView Resource Orchestrator
Cloud Edition V3.1.1
Operation Guide

Preface
Resource Orchestrator Documentation Road Map
The documentation road map for Resource Orchestrator is as shown below.
Resource Orchestrator Documentation Road Map
Point
Refer to the user role manuals displayed in the table below for roles that are not in the diagram.
Roles that are not in the diagram Roles that are in the diagram
Infrastructure operator
Infrastructure monitor
Infrastructure administrator
Tenant operator
Tenant monitor
Tenant administrator
(Dual-Role) Administrator
(Dual-Role) Operator
(Dual-Role) Monitor
Infrastructure administrator and Tenant administrator
For information about the documents for Resource Orchestrator, refer to "Chapter 1 Documentation Road Map" in the "Quick Start Guide
CE".
- i -

Purpose
This manual explains how to operate ServerView Resource Orchestrator (hereinafter Resource Orchestrator).
Target Readers
This manual is written for system administrators who will use Resource Orchestrator to operate the infrastructure in private cloud or data
center environments.
When setting up systems, it is assumed that readers have the basic knowledge required to configure the servers, storage, network devices,
and server virtualization software to be installed. Additionally, a basic understanding of directory services such as Active Directory and
LDAP is necessary.
Organization
This manual is composed as follows:
Section 1 Overview
Chapter 1 Overview of Operations, Maintenance, and Monitoring
Provides an overview of the operation, maintenance, and monitoring of Resource Orchestrator.
Section 2 Operation
Chapter 2 Starting and Stopping Managers and Agents
Explains the methods for deliberately starting and stopping managers and agents.
Chapter 3 Managing User Accounts
Explains the management of user accounts.
Chapter 4 Managing Tenants
Explains the management of tenants.
Chapter 5 Managing Templates
Explains the management of templates.
Chapter 6 Managing Resources and Resource Pools
Explains the management of resources and resource pools.
Chapter 7 Management of L-Platform
Explains the management of L-Platforms.
Chapter 8 Changing Settings
Explains how to modify various setting information.
Section 3 Maintenance
Chapter 9 Hardware Maintenance
Explains the maintenance of hardware.
Chapter 10 Backup and Restoration
Explains how to use the backup and restore provided by Resource Orchestrator.
Section 4 Monitoring
Chapter 11 Monitoring Resources
Explains how to monitor the configuration and status of managed resources.
- ii -

Chapter 12 Collecting Power Consumption Data and Displaying Graphs
Explains how to export the power consumption data collected from registered power monitoring targets and how to display it as
graphs, and also describes the exported data's format.
Chapter 13 Monitoring Resource Pools (Dashboard)
Explains the monitoring of resource pools.
Chapter 14 Monitoring L-Platforms
Explains the monitoring of L-Platforms.
Chapter 15 Accounting
Explains charging.
Chapter 16 Monitoring Logs
Explains the monitoring of logs.
Section 5 High Availability and Disaster Recovery
Chapter 17 High Availability of Managed Resources
Explains failover.
Chapter 18 Disaster Recovery
Explains the Disaster Recovery function for L-Servers.
Appendix A Notes on Operating ServerView Resource Orchestrator
Gives important reminders for the operation of Resource Orchestrator.
Appendix B Metering Log
Explains metering logs.
Glossary
Explains the terms used in this manual. Please refer to it when necessary.
Notational Conventions
The notation in this manual conforms to the following conventions.
-When using Resource Orchestrator and the functions necessary differ due to the necessary basic software (OS), it is indicated as
follows:
[Windows Manager] Sections related to Windows manager
[Linux Manager] Sections related to Linux manager
[Windows] Sections related to Windows (When not using Hyper-V)
[Linux] Sections related to Linux
[Solaris] Sections related to Solaris
[VMware] Sections related to VMware
[Hyper-V] Sections related to Hyper-V
[Xen] Sections related to RHEL5-Xen
[KVM] Sections related to RHEL-KVM
[Solaris Zones] Sections related to Solaris zones
- iii -

[OVM for x86] Sections related to Oracle VM Server for x86
[OVM for SPARC] Sections related to Oracle VM Server for SPARC
[Physical Servers] Sections related to physical servers
[VM host] Sections related to VMware, Windows Server 2008 with Hyper-V enabled,
Xen, RHEL-KVM, Solaris zones, and OVM for SPARC
-Unless specified otherwise, the blade servers mentioned in this manual refer to PRIMERGY BX servers.
-Oracle Solaris may also be indicated as Solaris, Solaris Operating System, or Solaris OS.
-Oracle Solaris Zones may also be indicated as Solaris Containers or Solaris Container.
-Oracle VM Server for x86 may also be indicated as Oracle VM.
-In Resource Orchestrator the following servers are referred to as SPARC Servers/SPARC Enterprise.
-SPARC Enterprise M3000/M4000/M5000/M8000/M9000
-SPARC Enterprise T5120/T5140/T5220/T5240/T5440
-SPARC M10-1/M10-4/M10-4S
-References and character strings or values requiring emphasis are indicated using double quotes ( " ).
-Window names, dialog names, menu names, and tab names are shown enclosed by brackets ( [ ] ).
-Button names are shown enclosed by angle brackets (< >) or square brackets ([ ]).
-The order of selecting menus is indicated using [ ]-[ ].
-Text to be entered by the user is indicated using bold text.
-Variables are indicated using italic text and underscores.
-The ellipses ("...") in menu names, indicating settings and operation window startup, are not shown.
-The ">" used in Windows is included in usage examples. When using Linux, read ">" as meaning "#".
-The URLs in this manual were correct when the manual was written.
Menus in the ROR console
Operations on the ROR console can be performed using either the menu bar or pop-up menus.
By convention, procedures described in this manual only refer to pop-up menus.
Regarding Installation Folder Paths
The installation folder path may be given as C:\Fujitsu\ROR in this manual.
Replace it as shown below.
When using Windows 64-bit (x64)
C:\Program Files (x86)\Resource Orchestrator
When using Windows 32-bit (x86)
C:\Program Files\Resource Orchestrator
Abbreviations
The following abbreviations are used in this manual:
- iv -

Abbreviation Products
Windows
Microsoft(R) Windows Server(R) 2012 Standard
Microsoft(R) Windows Server(R) 2012 Datacenter
Microsoft(R) Windows Server(R) 2008 Standard
Microsoft(R) Windows Server(R) 2008 Enterprise
Microsoft(R) Windows Server(R) 2008 R2 Standard
Microsoft(R) Windows Server(R) 2008 R2 Enterprise
Microsoft(R) Windows Server(R) 2008 R2 Datacenter
Microsoft(R) Windows Server(R) 2003 R2, Standard Edition
Microsoft(R) Windows Server(R) 2003 R2, Enterprise Edition
Microsoft(R) Windows Server(R) 2003 R2, Standard x64 Edition
Microsoft(R) Windows Server(R) 2003 R2, Enterprise x64 Edition
Windows(R) 8 Pro
Windows(R) 8 Enterprise
Windows(R) 7 Professional
Windows(R) 7 Ultimate
Windows Vista(R) Business
Windows Vista(R) Enterprise
Windows Vista(R) Ultimate
Microsoft(R) Windows(R) XP Professional operating system
Windows Server 2012 Microsoft(R) Windows Server(R) 2012 Standard
Microsoft(R) Windows Server(R) 2012 Datacenter
Windows Server 2008
Microsoft(R) Windows Server(R) 2008 Standard
Microsoft(R) Windows Server(R) 2008 Enterprise
Microsoft(R) Windows Server(R) 2008 R2 Standard
Microsoft(R) Windows Server(R) 2008 R2 Enterprise
Microsoft(R) Windows Server(R) 2008 R2 Datacenter
Windows 2008 x86 Edition Microsoft(R) Windows Server(R) 2008 Standard (x86)
Microsoft(R) Windows Server(R) 2008 Enterprise (x86)
Windows 2008 x64 Edition Microsoft(R) Windows Server(R) 2008 Standard (x64)
Microsoft(R) Windows Server(R) 2008 Enterprise (x64)
Windows Server 2003
Microsoft(R) Windows Server(R) 2003 R2, Standard Edition
Microsoft(R) Windows Server(R) 2003 R2, Enterprise Edition
Microsoft(R) Windows Server(R) 2003 R2, Standard x64 Edition
Microsoft(R) Windows Server(R) 2003 R2, Enterprise x64 Edition
Windows 2003 x64 Edition Microsoft(R) Windows Server(R) 2003 R2, Standard x64 Edition
Microsoft(R) Windows Server(R) 2003 R2, Enterprise x64 Edition
Windows 8 Windows(R) 8 Pro
Windows(R) 8 Enterprise
Windows 7 Windows(R) 7 Professional
Windows(R) 7 Ultimate
Windows Vista Windows Vista(R) Business Windows Vista(R) Enterprise
Windows Vista(R) Ultimate
Windows XP Microsoft(R) Windows(R) XP Professional operating system
Linux
Red Hat(R) Enterprise Linux(R) 5 (for x86)
Red Hat(R) Enterprise Linux(R) 5 (for Intel64)
Red Hat(R) Enterprise Linux(R) 5.1 (for x86)
Red Hat(R) Enterprise Linux(R) 5.1 (for Intel64)
Red Hat(R) Enterprise Linux(R) 5.2 (for x86)
Red Hat(R) Enterprise Linux(R) 5.2 (for Intel64)
Red Hat(R) Enterprise Linux(R) 5.3 (for x86)
- v -

Abbreviation Products
Red Hat(R) Enterprise Linux(R) 5.3 (for Intel64)
Red Hat(R) Enterprise Linux(R) 5.4 (for x86)
Red Hat(R) Enterprise Linux(R) 5.4 (for Intel64)
Red Hat(R) Enterprise Linux(R) 5.5 (for x86)
Red Hat(R) Enterprise Linux(R) 5.5 (for Intel64)
Red Hat(R) Enterprise Linux(R) 5.6 (for x86)
Red Hat(R) Enterprise Linux(R) 5.6 (for Intel64)
Red Hat(R) Enterprise Linux(R) 5.7 (for x86)
Red Hat(R) Enterprise Linux(R) 5.7 (for Intel64)
Red Hat(R) Enterprise Linux(R) 5.8 (for x86)
Red Hat(R) Enterprise Linux(R) 5.8 (for Intel64)
Red Hat(R) Enterprise Linux(R) 6.2 (for x86)
Red Hat(R) Enterprise Linux(R) 6.2 (for Intel64)
Red Hat(R) Enterprise Linux(R) 6.3 (for x86)
Red Hat(R) Enterprise Linux(R) 6.3 (for Intel64)
SUSE(R) Linux Enterprise Server 11 for x86
SUSE(R) Linux Enterprise Server 11 for EM64T
Red Hat Enterprise Linux
Red Hat(R) Enterprise Linux(R) 5 (for x86)
Red Hat(R) Enterprise Linux(R) 5 (for Intel64)
Red Hat(R) Enterprise Linux(R) 5.1 (for x86)
Red Hat(R) Enterprise Linux(R) 5.1 (for Intel64)
Red Hat(R) Enterprise Linux(R) 5.2 (for x86)
Red Hat(R) Enterprise Linux(R) 5.2 (for Intel64)
Red Hat(R) Enterprise Linux(R) 5.3 (for x86)
Red Hat(R) Enterprise Linux(R) 5.3 (for Intel64)
Red Hat(R) Enterprise Linux(R) 5.4 (for x86)
Red Hat(R) Enterprise Linux(R) 5.4 (for Intel64)
Red Hat(R) Enterprise Linux(R) 5.5 (for x86)
Red Hat(R) Enterprise Linux(R) 5.5 (for Intel64)
Red Hat(R) Enterprise Linux(R) 5.6 (for x86)
Red Hat(R) Enterprise Linux(R) 5.6 (for Intel64)
Red Hat(R) Enterprise Linux(R) 5.7 (for x86)
Red Hat(R) Enterprise Linux(R) 5.7 (for Intel64)
Red Hat(R) Enterprise Linux(R) 5.8 (for x86)
Red Hat(R) Enterprise Linux(R) 5.8 (for Intel64)
Red Hat(R) Enterprise Linux(R) 6.2 (for x86)
Red Hat(R) Enterprise Linux(R) 6.2 (for Intel64)
Red Hat(R) Enterprise Linux(R) 6.3 (for x86)
Red Hat(R) Enterprise Linux(R) 6.3 (for Intel64)
Red Hat Enterprise Linux 5
Red Hat(R) Enterprise Linux(R) 5 (for x86)
Red Hat(R) Enterprise Linux(R) 5 (for Intel64)
Red Hat(R) Enterprise Linux(R) 5.1 (for x86)
Red Hat(R) Enterprise Linux(R) 5.1 (for Intel64)
Red Hat(R) Enterprise Linux(R) 5.2 (for x86)
Red Hat(R) Enterprise Linux(R) 5.2 (for Intel64)
Red Hat(R) Enterprise Linux(R) 5.3 (for x86)
Red Hat(R) Enterprise Linux(R) 5.3 (for Intel64)
Red Hat(R) Enterprise Linux(R) 5.4 (for x86)
Red Hat(R) Enterprise Linux(R) 5.4 (for Intel64)
Red Hat(R) Enterprise Linux(R) 5.5 (for x86)
Red Hat(R) Enterprise Linux(R) 5.5 (for Intel64)
Red Hat(R) Enterprise Linux(R) 5.6 (for x86)
Red Hat(R) Enterprise Linux(R) 5.6 (for Intel64)
Red Hat(R) Enterprise Linux(R) 5.7 (for x86)
Red Hat(R) Enterprise Linux(R) 5.7 (for Intel64)
- vi -

Abbreviation Products
Red Hat(R) Enterprise Linux(R) 5.8 (for x86)
Red Hat(R) Enterprise Linux(R) 5.8 (for Intel64)
Red Hat Enterprise Linux 6
Red Hat(R) Enterprise Linux(R) 6.2 (for x86)
Red Hat(R) Enterprise Linux(R) 6.2 (for Intel64)
Red Hat(R) Enterprise Linux(R) 6.3 (for x86)
Red Hat(R) Enterprise Linux(R) 6.3 (for Intel64)
RHEL5-Xen Red Hat(R) Enterprise Linux(R) 5.4 (for x86) Linux Virtual Machine Function
Red Hat(R) Enterprise Linux(R) 5.4 (for Intel64) Linux Virtual Machine Function
RHEL-KVM
Red Hat(R) Enterprise Linux(R) 6.2 (for x86) Virtual Machine Function
Red Hat(R) Enterprise Linux(R) 6.2 (for Intel64) Virtual Machine Function
Red Hat(R) Enterprise Linux(R) 6.3 (for x86) Virtual Machine Function
Red Hat(R) Enterprise Linux(R) 6.3 (for Intel64) Virtual Machine Function
DOS Microsoft(R) MS-DOS(R) operating system, DR DOS(R)
SUSE Linux Enterprise Server SUSE(R) Linux Enterprise Server 11 for x86
SUSE(R) Linux Enterprise Server 11 for EM64T
OVM for x86 Oracle VM Server for x86
OVM for SPARC Oracle VM Server for SPARC
ESC ETERNUS SF Storage Cruiser
GLS PRIMECLUSTER GLS
Navisphere EMC Navisphere Manager
Solutions Enabler EMC Solutions Enabler
MSFC Microsoft Failover Cluster
Solaris Oracle Solaris10 05/09 (Update7) Media Pack Oracle Solaris11 11/11 Media Pack
Oracle Solaris11.1 Media Pack
SCVMM System Center Virtual Machine Manager 2008 R2
System Center 2012 Virtual Machine Manager
VMware
VMware vSphere(R) 4
VMware vSphere(R) 4.1
VMware vSphere(R) 5
VMware vSphere(R) 5.1
VMware ESX VMware(R) ESX(R)
VMware ESX 4 VMware(R) ESX(R) 4
VMware ESXi VMware(R) ESXi(TM)
VMware ESXi 5.0 VMware(R) ESXi(TM) 5.0
VMware Tools VMware(R) Tools
VMware vSphere 4.0 VMware vSphere(R) 4.0
VMware vSphere 4.1 VMware vSphere(R) 4.1
VMware vSphere 5 VMware vSphere(R) 5
VMware vSphere 5.1 VMware vSphere(R) 5.1
VMware vSphere Client VMware vSphere(R) Client
VMware vCenter Server VMware(R) vCenter(TM) Server
VMware vClient VMware(R) vClient(TM)
VMware FT VMware(R) Fault Tolerance
- vii -

Abbreviation Products
VMware DRS VMware(R) Distributed Resource Scheduler
VMware DPM VMware(R) Distributed Power Management
VMware vDS VMware(R) vNetwork Distributed Switch
VMware Storage VMotion VMware(R) Storage VMotion
VIOM ServerView Virtual-IO Manager
BladeLogic BMC BladeLogic Server Automation
Internet Explorer Windows(R) Internet Explorer(R) 8 Windows(R) Internet Explorer(R) 9
Windows(R) Internet Explorer(R) 10
ServerView Agent ServerView SNMP Agents for MS Windows (32bit-64bit) ServerView Agents Linux
ServerView Agents VMware for VMware ESX Server
RCVE ServerView Resource Coordinator VE
ROR ServerView Resource Orchestrator
ROR VE ServerView Resource Orchestrator Virtual Edition
ROR CE ServerView Resource Orchestrator Cloud Edition
Resource Coordinator Systemwalker Resource Coordinator
Systemwalker Resource Coordinator Virtual server Edition
Export Administration Regulation Declaration
Documents produced by FUJITSU may contain technology controlled under the Foreign Exchange and Foreign Trade Control Law of
Japan. Documents which contain such technology should not be exported from Japan or transferred to non-residents of Japan without first
obtaining authorization from the Ministry of Economy, Trade and Industry of Japan in accordance with the above law.
Trademark Information
-BMC, BMC Software, and the BMC Software logo are the exclusive properties of BMC Software, Inc., are registered with the U.S.
Patent and Trademark Office, and may be registered or pending registration in other countries.
-EMC, EMC2, CLARiiON, Symmetrix, and Navisphere are trademarks or registered trademarks of EMC Corporation.
-HP is a registered trademark of Hewlett-Packard Company.
-Linux is a trademark or registered trademark of Linus Torvalds in the United States and other countries.
-Microsoft, Windows, MS-DOS, Windows Server, Windows Vista, Excel, Active Directory, and Internet Explorer are either registered
trademarks or trademarks of Microsoft Corporation in the United States and other countries.
-NetApp is a registered trademark of Network Appliance, Inc. in the US and other countries. Data ONTAP, Network Appliance, and
Snapshot are trademarks of Network Appliance, Inc. in the US and other countries.
-Oracle and Java are registered trademarks of Oracle and/or its affiliates in the United States and other countries.
-Oracle is a registered trademark of Oracle Corporation and/or its affiliates.
-Red Hat, RPM and all Red Hat-based trademarks and logos are trademarks or registered trademarks of Red Hat, Inc. in the United
States and other countries.
-SUSE is a registered trademark of SUSE LINUX AG, a Novell business.
-VMware, the VMware "boxes" logo and design, Virtual SMP, and VMotion are registered trademarks or trademarks of VMware, Inc.
in the United States and/or other jurisdictions.
- viii -

-ServerView and Systemwalker are registered trademarks of FUJITSU LIMITED.
-All other brand and product names are trademarks or registered trademarks of their respective owners.
Notices
-The contents of this manual shall not be reproduced without express written permission from FUJITSU LIMITED.
-The contents of this manual are subject to change without notice.
Month/Year Issued, Edition Manual Code
November 2011, First Edition J2X1-7611-01ENZ0(00)
December 2011, 1.1 J2X1-7611-01ENZ0(01)
January 2012, 1.2 J2X1-7611-01ENZ0(02)
February 2012, 1.3 J2X1-7611-01ENZ0(03)
March 2012, 1.4 J2X1-7611-01ENZ0(04)
April 2012, 1.5 J2X1-7611-01ENZ0(05)
July 2012, Second Edition J2X1-7611-02ENZ0(00)
October 2012, Third Edition J2X1-7611-03ENZ0(00)
December 2012, Fourth
Edition J2X1-7611-04ENZ0(00)
January 2013, Fifth Edition J2X1-7611-05ENZ0(00)
January 2013, 5.1 J2X1-7611-05ENZ0(01)
January 2013, 5.2 J2X1-7611-05ENZ0(02)
March 2013, 5.3 J2X1-7611-05ENZ0(03)
Copyright 2010-2013 FUJITSU LIMITED
- ix -

Contents
Part 1 Overview........................................................................................................................................................................1
Chapter 1 Overview of Operations, Maintenance, and Monitoring...........................................................................................2
1.1 Operation, Maintenance, and Monitoring by Infrastructure Administrators.......................................................................................3
1.2 Operation, Maintenance, and Monitoring by Tenant Administrators..................................................................................................4
1.3 Operation, Maintenance, and Monitoring by Tenant Users.................................................................................................................4
Part 2 Operation.......................................................................................................................................................................5
Chapter 2 Starting and Stopping Managers and Agents..........................................................................................................6
2.1 Starting and Stopping the Manager.....................................................................................................................................................6
2.2 Starting and Stopping an Agent...........................................................................................................................................................8
Chapter 3 Managing User Accounts.......................................................................................................................................11
Chapter 4 Managing Tenants.................................................................................................................................................12
Chapter 5 Managing Templates.............................................................................................................................................13
Chapter 6 Managing Resources and Resource Pools........................................................................................................... 14
6.1 Managing Resource Pools.................................................................................................................................................................14
6.2 Managing Resources..........................................................................................................................................................................14
6.3 Managing L-Servers..........................................................................................................................................................................14
Chapter 7 Management of L-Platform....................................................................................................................................15
7.1 Review for L-Platform Usage Applications......................................................................................................................................15
7.2 Administration of L-Platform............................................................................................................................................................15
7.2.1 Deleting Unnecessary Data.........................................................................................................................................................15
7.2.2 Updating the Cloning Image.......................................................................................................................................................15
7.2.3 Importing to L-Platform..............................................................................................................................................................15
7.2.3.1 Network Information Settings for Converted L-Servers.....................................................................................................16
7.2.3.2 Importing L-Servers.............................................................................................................................................................16
7.2.3.3 Releasing L-Servers.............................................................................................................................................................16
7.2.4 Setting OS with Deployment on RHEL-KVM...........................................................................................................................16
7.2.5 Startup Priority Level Settings ...................................................................................................................................................17
7.2.6 Action to Take when an Error has Occurred..............................................................................................................................17
7.2.7 Setting Alive Monitoring............................................................................................................................................................18
7.2.8 Redundancy Settings...................................................................................................................................................................19
7.2.9 Automatic Server Release Settings.............................................................................................................................................19
7.2.10 Definition VM Specific Information Definition File................................................................................................................20
7.2.11 Changing Server Specifications on a VM Host........................................................................................................................20
Chapter 8 Changing Settings................................................................................................................................................. 21
8.1 Registering and Deleting Application Process Assessors..................................................................................................................21
8.1.1 Registering an Application Process Assessor.............................................................................................................................21
8.1.2 Deleting an Application Process Assessor..................................................................................................................................21
8.1.2.1 Deleting an Infrastructure Administrator/dual-role Administrator from IflowUsers Group...............................................21
8.2 Settings for Sending Email................................................................................................................................................................22
8.3 Settings for Port Number of Admin Servers......................................................................................................................................23
8.4 Editing Information in the Home Window........................................................................................................................................25
8.5 Settings for L-Platform Management................................................................................................................................................26
8.5.1 Settings for Permissions to Change L-Platform Templates........................................................................................................26
8.5.2 Subnet Settings at Segment Editing............................................................................................................................................27
8.5.3 Settings for the Simplified Reconfiguration Function................................................................................................................27
8.5.4 Distribution Ratio Settings..........................................................................................................................................................28
8.5.5 Application Process Settings......................................................................................................................................................29
8.5.5.1 How to Modify the Application Process Settings................................................................................................................29
- x -

8.5.5.2 How to Modify Application Process to be Used.................................................................................................................29
8.5.6 Editing the Environment Setup File for the L-Platform API......................................................................................................29
8.5.7 Edit the License Agreement........................................................................................................................................................29
8.5.8 Settings when RHEL5-Xen is used............................................................................................................................................29
8.5.9 Default Password Setting for Sent Emails..................................................................................................................................29
8.5.10 Settings for the Maximum Number of Connections for the L-Platform Template..................................................................30
8.5.11 Customizing the User Rights for L-Platform Operations.........................................................................................................30
8.6 Settings for Tenant Management and Account Management............................................................................................................30
8.6.1 Settings for Tenant Management and Account Management.....................................................................................................31
8.6.2 Editing the User Agreement when Registering a User...............................................................................................................34
8.7 Accounting Settings...........................................................................................................................................................................34
8.7.1 Display Function Settings for Estimated Price...........................................................................................................................34
8.7.2 Currency Information Settings....................................................................................................................................................36
8.7.3 Metering Log Settings................................................................................................................................................................36
8.7.4 Usage Charge Calculator Settings..............................................................................................................................................38
8.8 System Condition Server List Settings..............................................................................................................................................39
8.9 Settings for Event Log Output for CMDB Agent..............................................................................................................................41
8.10 Setting for Directory Service Connection Information....................................................................................................................41
Part 3 Retention......................................................................................................................................................................42
Chapter 9 Hardware Maintenance..........................................................................................................................................43
9.1 Overview............................................................................................................................................................................................43
9.2 Blade Server Maintenance.................................................................................................................................................................48
9.2.1 Maintenance LED.......................................................................................................................................................................48
9.2.2 Reconfiguration of Hardware Properties....................................................................................................................................49
9.2.3 Replacing Servers.......................................................................................................................................................................50
9.2.4 Replacing Non-Server Hardware................................................................................................................................................52
9.3 Maintenance for Servers Other Than Blade Servers.........................................................................................................................53
9.3.1 Reconfiguration of Hardware Properties....................................................................................................................................53
9.3.2 Replacing Servers.......................................................................................................................................................................55
9.3.3 Replacing and Adding Server Components................................................................................................................................60
9.3.4 Replacing Non-server Hardware................................................................................................................................................61
9.4 For Servers not Using Server Management Software.......................................................................................................................61
9.5 Network Device Maintenance...........................................................................................................................................................62
9.5.1 Replacement Procedure of Network Devices.............................................................................................................................62
9.5.1.1 When the Device to Replace has Failed..............................................................................................................................63
9.5.1.2 When the Device to Replace has not Failed........................................................................................................................64
9.5.2 Regular Maintenance Procedure of Network Devices................................................................................................................67
9.5.3 Procedure for Addition of Network Devices..............................................................................................................................68
9.5.3.1 Adding L2 Switches to Handle Insufficient Numbers of Ports when Adding Servers........................................................68
9.5.3.2 Adding Firewalls, Server Load Balancers, and L2 Switches for Additional Tenants.........................................................70
9.5.4 Procedure for Addition or Modification of Connection Destinations of Network Devices.......................................................72
9.6 Storage Device Maintenance.............................................................................................................................................................73
9.7 Power Monitoring Device (PDU or UPS) Maintenance....................................................................................................................73
Chapter 10 Backup and Restoration......................................................................................................................................75
10.1 Backup and Restoration of Admin Servers......................................................................................................................................75
10.1.1 Mechanism of Backup and Restoration....................................................................................................................................76
10.1.2 Offline Backup of the Admin Server........................................................................................................................................82
10.1.2.1 Stopping the Manager........................................................................................................................................................83
10.1.2.2 Back up the Resources of this Product..............................................................................................................................83
10.1.2.3 Starting the Manager..........................................................................................................................................................83
10.1.3 Online Backup of the Admin Server.........................................................................................................................................84
10.1.3.1 Items to be Determined Before Periodic Execution..........................................................................................................86
10.1.3.2 Settings for Periodic Execution of Backup........................................................................................................................86
10.1.4 Restoring the Admin Server.....................................................................................................................................................89
10.1.4.1 Stopping the Manager........................................................................................................................................................89
- xi -

10.1.4.2 Restoring the Resources of This Product...........................................................................................................................89
10.1.4.3 Starting the Manager..........................................................................................................................................................90
10.1.4.4 Updating Backup Information of Network Device Files...................................................................................................90
10.1.4.5 Disabling L-Platform Applications....................................................................................................................................90
10.1.4.6 Updating the Configuration Information in the Operational Status Information..............................................................90
10.1.5 Online Backup Settings for Metering.......................................................................................................................................91
10.2 Backup and Restoration of Network Devices..................................................................................................................................94
10.2.1 Mechanism of Backup and Restoration....................................................................................................................................94
10.2.2 Backup of Network Devices.....................................................................................................................................................94
10.2.3 Restoration of Network Devices...............................................................................................................................................95
Part 4 Monitoring....................................................................................................................................................................97
Chapter 11 Monitoring Resources..........................................................................................................................................98
11.1 Overview..........................................................................................................................................................................................98
11.2 Resource Status................................................................................................................................................................................99
11.3 Addressing Resource Failures.......................................................................................................................................................102
11.4 Monitoring Networks.....................................................................................................................................................................102
11.4.1 Identification of Error Locations............................................................................................................................................103
11.4.1.1 When Notified of an Error by a Tenant Administrator or Tenant User...........................................................................103
11.4.1.2 When a Change in State is Detected during Status Confirmation Using the ROR Console...........................................104
11.4.2 Firewall Status Confirmation..................................................................................................................................................105
11.4.2.1 When an L-Platform Using a Firewall is Identified........................................................................................................105
11.4.2.2 When a Change in Firewall Status is Detected during Status Confirmation Using the ROR Console...........................106
11.4.3 Server Load Balancer Status Confirmation............................................................................................................................107
11.4.3.1 When an L-Platform Using a Server Load Balancer is Identified...................................................................................107
11.4.3.2 When an L-Platform Using a Server Load Balancer is Identified...................................................................................108
11.4.4 L2 Switch Status Confirmation...............................................................................................................................................109
11.4.5 Status Confirmation of Other Network Devices.....................................................................................................................110
11.5 Monitoring Storage........................................................................................................................................................................110
Chapter 12 Collecting Power Consumption Data and Displaying Graphs............................................................................112
12.1 Overview........................................................................................................................................................................................112
12.2 Exporting Power Consumption Data.............................................................................................................................................112
12.3 Power Consumption Data File (CSV Format)...............................................................................................................................112
12.4 Displaying Power Consumption Data Graphs...............................................................................................................................113
Chapter 13 Monitoring Resource Pools (Dashboard)...........................................................................................................114
Chapter 14 Monitoring L-Platforms.......................................................................................................................................115
Chapter 15 Accounting.........................................................................................................................................................116
15.1 Overview........................................................................................................................................................................................116
15.2 Manage Accounting Information...................................................................................................................................................117
15.2.1 Information Maintained by Product Master............................................................................................................................118
15.2.2 Accounting Information File Format......................................................................................................................................121
15.3 Operate Accounting Information...................................................................................................................................................124
15.3.1 Register Accounting Information...........................................................................................................................................125
15.3.2 Modify Accounting Information.............................................................................................................................................127
15.3.3 Delete Accounting Information..............................................................................................................................................128
15.3.4 Reference Accounting Information........................................................................................................................................129
15.4 Calculation of Usage charges........................................................................................................................................................130
15.4.1 Overview of Usage charge Calculation..................................................................................................................................130
15.4.2 Resource Usage Times............................................................................................................................................................130
15.4.3 How to Charge for Resources.................................................................................................................................................131
15.4.4 Resource Usage Amounts and Times.....................................................................................................................................131
15.4.5 Example of Usage charge Calculation....................................................................................................................................132
15.4.6 Sending Usage charges...........................................................................................................................................................135
15.4.6.1 Usage Charge List File....................................................................................................................................................135
- xii -

15.4.6.2 Usage charge Detail File..................................................................................................................................................136
Chapter 16 Monitoring Logs.................................................................................................................................................139
16.1 Operation Logs..............................................................................................................................................................................139
16.1.1 Overview.................................................................................................................................................................................139
16.1.2 Usage Method.........................................................................................................................................................................142
16.1.3 Retention.................................................................................................................................................................................143
16.1.4 Scope of Operations Recorded in Operation Logs.................................................................................................................144
16.2 Audit Logs.....................................................................................................................................................................................144
16.2.1 Configuration Management Audit Log...................................................................................................................................144
16.2.2 Audit Logs of Output by the Tenant Management, Accounting, Access Control and System Condition.............................150
16.2.3 Application Process Audit Log...............................................................................................................................................156
16.3 Operation Logs (Activity)..............................................................................................................................................................159
16.3.1 Operation Logs for Accounting..............................................................................................................................................159
16.4 Investigation Logs..........................................................................................................................................................................159
16.4.1 Investigation Logs on Admin Servers....................................................................................................................................159
Part 5 High Availability and Disaster Recovery....................................................................................................................162
Chapter 17 High Availability of Managed Resources...........................................................................................................163
17.1 High Availability of Managed Resources......................................................................................................................................163
17.1.1 High Availability of L-Servers...............................................................................................................................................163
17.1.2 Blade Chassis High Availability.............................................................................................................................................166
17.1.3 High Availability for Storage Chassis....................................................................................................................................168
17.2 High Availability for Admin Servers.............................................................................................................................................173
Chapter 18 Disaster Recovery.............................................................................................................................................177
Appendix A Notes on Operating ServerView Resource Orchestrator..................................................................................178
Appendix B Metering Log.....................................................................................................................................................182
B.1 Types of Metering Logs..................................................................................................................................................................182
B.2 Output Contents of Metering Logs.................................................................................................................................................183
B.3 Formats of Metering Log Files.......................................................................................................................................................188
B.4 Deleting Metering Logs..................................................................................................................................................................191
Glossary...............................................................................................................................................................................192
- xiii -

Part 1 Overview
Chapter 1 Overview of Operations, Maintenance, and Monitoring...................................................................2
- 1 -

Chapter 1 Overview of Operations, Maintenance, and
Monitoring
This chapter provides an overview of operation, maintenance, and monitoring of Resource Orchestrator.
For additional information on the operation, maintenance, and monitoring of this product, refer to the configuration information in the
"Setup Guide CE".
Flow of Service Provision Using Applications
The flow of service provision using applications in an environment where Resource Orchestrator has been installed is as shown below.
Figure 1.1 Flow of Service Provision Using Applications
* Note: Necessary when using firewalls (Firewall), server load balancers (SLB), or L2 switches.
1. Application for use
The tenant user applies to use an L-Platform.
For details, refer to "5.2 Subscribe to an L-Platform" in the "User's Guide for Tenant Users CE".
2. Approval
The tenant administrator approves the application by a tenant user to use an L-Platform.
For details, refer to "9.3 Approving an Application" in the "User's Guide for Tenant Administrators CE".
3. Assessment
The infrastructure administrator assesses the content of the application to use an L-Platform from the tenant administrator or tenant
user.
For details, refer to "10.2 Assessing an Application" in the "User's Guide for Infrastructure Administrators CE".
4. Notification of settings for firewalls and server load balancers
When using a firewall or a server load balancer, the infrastructure administrator prepares a script for configuring the firewall or
server load balancer.
Based on the information provided by the infrastructure administrator, the tenant administrator notifies the tenant user of the
configuration information for the firewall or server load balancer.
- 2 -

5. Configure firewalls
When configuring an application on an L-Server that has been deployed on the public LAN, the tenant user needs to create a rule
that enables access to that L-Server from the public LAN.
6. Configure applications
The tenant user performs the installation and environment settings necessary for the application to be provided as a service by the
L-Server.
7. Confirm communication with applications
The tenant user checks that there are no problems with the applications installed on the L-Server, and that the L-Server can be
accessed from the public LAN.
When a firewall has not been configured, configure one.
If there are no problems in the communication check, proceed to the next step.
If there are problems, resolve them and check communication again.
8. Configure server load balancers
When an L-Platform has a server load balancer deployed, the tenant user performs configuration of the server load balancer.
9. Check communication with server load balancers
When an L-Platform has a server load balancer deployed, test that the settings of the server load balancer are correct.
It is necessary to configure the rules for the firewall so that communication using the virtual IP address configured for the server
load balancer is possible.
If there are no problems in the communication check, proceed to the next step.
If there are problems, resolve them and check communication again.
10. Configure firewalls
Configure address translation and firewall rules, and then test that communication with the L-Server is possible.
If the test shows no problems, configuration of the L-Platform operation environment is complete.
If there are problems, resolve them and check communication again.
1.1 Operation, Maintenance, and Monitoring by Infrastructure
Administrators
This section explains operation, maintenance, and monitoring by infrastructure administrators when using Resource Orchestrator.
Infrastructure Administrator (infra_admin) Operations
Refer to the "User's Guide for Infrastructure Administrators (Resource Management) CE" for the [Resource] tab operations.
Refer to the "User's Guide for Infrastructure Administrators CE" for other operations.
Infrastructure Administrator (infra_admin) Management Operations
The operations that infrastructure administrators (infra_admin) can perform are as follow.
-Management of resources and resource pools
-Registration, modification, and deletion of resources
-Creation, deletion, modification of global pools and tenant local pools
-Review and confirmation of application status and L-Platform usage applications
-Management of tenants
-Creation, modification, and deletion of tenants
- 3 -

-Create a tenant administrator
-Creation, modification, and deletion of user accounts
-Management of templates
-Creation, modification, and deletion of L-Platform templates (*)
-Creation, modification, and deletion of L-Server templates
* Note: To check subscription requests submitted by using a created L-Platform template, use a dual-role administrator account.
For more details, refer to "Appendix B Applying (Subscribe) for L-Platform Usage by Dual-Role Administrators" in "User's Guide
for Infrastructure Administrators".
Infrastructure Administrator (infra_admin) Maintenance Operations
Maintenance operations that infrastructure administrators (infra_admin) can perform are as follow:
-Hardware maintenance
-System maintenance (*2)
-Backup and restoration of admin servers (*2)
*2: OS administrative privileges are necessary for OS maintenance and backup and restore of admin servers.
Infrastructure Administrator (infra_admin) Monitoring Operations
Monitoring operations that infrastructure administrators (infra_admin) can perform are as follow:
-Monitoring of resource pools using dashboard
-Monitoring of L-Platform operation statuses
-Monitoring of resource capacity (servers, storage and network)
-Monitoring of operation logs and audit logs
1.2 Operation, Maintenance, and Monitoring by Tenant
Administrators
For details on operations, maintenance and monitoring by tenant administrators, refer to the "User's Guide for Tenant Administrators CE".
1.3 Operation, Maintenance, and Monitoring by Tenant Users
For details on operations, maintenance and monitoring by tenant users, refer to the "User's Guide for Tenant Users CE".
- 4 -

Part 2 Operation
Chapter 2 Starting and Stopping Managers and Agents..................................................................................6
Chapter 3 Managing User Accounts...............................................................................................................11
Chapter 4 Managing Tenants.........................................................................................................................12
Chapter 5 Managing Templates.....................................................................................................................13
Chapter 6 Managing Resources and Resource Pools...................................................................................14
Chapter 7 Management of L-Platform............................................................................................................15
Chapter 8 Changing Settings.........................................................................................................................21
- 5 -

Chapter 2 Starting and Stopping Managers and Agents
This chapter explains how to manually start or stop managers and agents.
To use Resource Orchestrator, both the manager and agents must be running.
The manager and agent services are configured to start automatically upon startup of their respective servers (admin server, managed
server). Normally, there should be no need to manually start or stop either the manager or agents. To start or stop a manager or an agent
intentionally, refer to "2.1 Starting and Stopping the Manager" and "2.2 Starting and Stopping an Agent".
Note
When using the HBA address rename function, ensure that the manager is started before starting any managed servers. The power on
procedure should be managed as follows: first, start the admin server together with any storage devices, and start the managed servers 10
minutes later.
Managed servers will not boot up properly if they are started before the manager. Make sure that the manager is running before starting
managed servers.
Additionally, when using the HBA address rename function, the HBA address rename setup service should be started on a dedicated server
(HBA address rename server) and left running continuously. For details on starting, stopping, and confirming the state of the HBA address
rename setup service, refer to "Chapter 10 Settings for the HBA address rename Setup Service" in the "Setup Guide CE".
2.1 Starting and Stopping the Manager
The Resource Orchestrator manager starts automatically on the admin server.
This section explains how to manually start or stop the manager and how to check its running state.
[Windows Manager]
The manager is made up of the following two groups of Windows services:
-Manager Services
Resource Coordinator Manager
Resource Coordinator Task Manager
Resource Coordinator Web Server (Apache)
Resource Orchestrator Sub Web Server (Mongrel)
Resource Orchestrator Sub Web Server (Mongrel2)
Resource Coordinator Sub Web Server (Mongrel3)
Resource Coordinator Sub Web Server (Mongrel4)
Resource Coordinator Sub Web Server (Mongrel5)
Resource Coordinator DB Server (PostgreSQL)
ServerView Resource Orchestrator Service Catalog Manager DB Service(Dashboard)
ServerView Resource Orchestrator Service Catalog Manager DB Service(Charging)
ServerView Resource Orchestrator Service Catalog Manager REST Service(Charging)
-Related Services
Deployment Service
TFTP Service
- 6 -