Fujitsu ETERNUS DX60 User manual

Package Contents
P3AM-3062-03EN
Fujitsu would like to thank you for purchasing the ETERNUS DX60/DX80 Disk storage system (hereinafter referred to as
"ETERNUS DX60/DX80") and related options.
Use this document to check the contents of your ETERNUS DX60/DX80 and options packages shipment. If any items are found to
be missing, please contact your sales representative for help. Third Edition
October 2009
Checking the package contents for missing items
Check the contents of the ETERNUS DX60/DX80 and options packages shipment against the following list to con-
firm that there are no missing items.
•Store the package contents in a safe and secure location, as they may be needed again when making changes to the system
or reinstalling the software.
•Note that the package may sometimes also contain an Errata sheet and/or other such unlisted documentation.
❏ETERNUS DX60 and DX80 Base Unit Fibre Channel dual controller model
(ET06F22AU, ET08E22AU, ET08F22AU)
❏ETERNUS DX60 and DX80 Base Unit Fibre Channel single controller model
(ET06F12AU, ET08E12AU, ET08F12AU)
❏ETERNUS DX60 and DX80 Base Unit iSCSI dual controller model (ET06L22AU, ET08L22AU)
❏ETERNUS DX60 and DX80 Base Unit iSCSI single controller model (ET06L12AU, ET08L12AU)
❑Controller Enclosure (x 1)
❑Front cover (x 1)
❑Rack mount kit (*1) (x 1 set)
❑AC200V cables (x 2)
IEC320-C13 ↔NEMA L6-15P (4m)
❑Wrist strap (x 1)
❑Setup Guide (Fibre Channel model) (x 1)
❑Safety Precautions (x 1)
❑Package Contents (this manual) (x 1)
❑User Guide (Document CD) (x 1)
❑Network Settings sticker (x 1)
❑DE_No.Label (x 1)
❑Pin (x 1)
Used to adjust the Controller Enclosure's AUTO
POWER dip-switch
❑Guide of Initial User Accounts for
Fujitsu Support Engineers (x 1)
❑Controller Enclosure (x 1)
❑Front cover (x 1)
❑Rack mount kit (*1) (x 1 set)
❑AC200V cables (x 2)
IEC320-C13 ↔NEMA L6-15P (4m)
❑Wrist strap (x 1)
❑Setup Guide (iSCSI model) (x 1)
❑Safety Precautions (x 1)
❑Package Contents (this manual) (x 1)
❑User Guide (Document CD) (x 1)
❑Network Settings sticker (x 1)
❑DE_No.Label (x 1)
❑Pin (x 1)
Used to adjust the Controller Enclosure's AUTO
POWER dip-switch
❑Guide of Initial User Accounts for
Fujitsu Support Engineers (x 1)
Disk storage system

❏ETERNUS DX60 and DX80 Base Unit SAS dual controller model (ET06S22AU, ET08S22AU)
❏ETERNUS DX60 and DX80 Base Unit SAS single controller model (ET06S12AU, ET08S12AU)
❏Expansion Controller for ETERNUS DX60 Fibre Channel model (ETLC6F4AU)
❏Expansion Controller for ETERNUS DX80 Fibre Channel model (ETLC8F8AU, ETLC8F4AU)
❏Expansion Controller for ETERNUS DX60 iSCSI model (ETLC6L1AU)
❏Expansion Controller for ETERNUS DX80 iSCSI model (ETLC8L1AU)
❏Expansion Controller for ETERNUS DX60 SAS model (ETLC6S3AU)
❏Expansion Controller for ETERNUS DX80 SAS model (ETLC8S3AU)
❏3.5" Type Drive Enclosure dual expander model (ETLDE2AU)
❏3.5" Type Drive Enclosure single expander model (ETLDE1AU)
❏Expansion Expander (ETLEXAU)
❏3.5" One Disk Drive (ETLSA3HAU, ETLSA4HAU, ETLNS7HAU, ETLNS1HAU)
❏3.5" Two Disk Drives (ETLSA3MAU, ETLSA4MAU, ETLNS7MAU, ETLNS1MAU)
❏3.5" Four Disk Drives (ETLSA3PAU, ETLSA4PAU, ETLNS7PAU, ETLNS1PAU)
❑Controller Enclosure (x 1)
❑Front cover (x 1)
❑Rack mount kit (*1) (x 1 set)
❑AC200V cables (x 2)
IEC320-C13 ↔NEMA L6-15P (4m)
❑Wrist strap (x 1)
❑Setup Guide (SAS model) (x 1)
❑Safety Precautions (x 1)
❑Package Contents (this manual) (x 1)
❑User Guide (Document CD) (x 1)
❑Network Settings sticker (x 1)
❑DE_No.Label (x 1)
❑Pin (x 1)
Used to adjust the Controller Enclosure's AUTO
POWER dip-switch
❑Guide of Initial User Accounts for
Fujitsu Support Engineers (x 1)
❑Controller (x 1)
❑Wrist strap (x 1) ❑Using Optional Products (x 1) ❑Package Contents (this manual) (x 1)
❑Drive Enclosure (x 1)
❑Front cover (x 1)
❑Rack mount kit (*1) (x 1 set)
❑AC200V cables (x 2)
IEC320-C13 ↔NEMA L6-15P (4m)
❑miniSAS cables (x 2)
SFF-8088 ↔SFF-8088 (75cm)
❑Wrist strap (*2) (x 1)
❑Using Optional Products (*2) (x 1)
❑Package Contents (this manual) (*2) (x 1)
❑Drive Enclosure (x 1)
❑Front cover (x 1)
❑Rack mount kit (*1) (x 1 set)
❑AC200V cables (x 2)
IEC320-C13 ↔NEMA L6-15P (4m)
❑miniSAS cables (x 1)
SFF-8088 ↔SFF-8088 (75cm)
❑Wrist strap (*2) (x 1)
❑Using Optional Products (*2) (x 1)
❑Package Contents (this manual) (*2) (x 1)
❑Expander (x 1)
❑Wrist strap (x 1) ❑miniSAS cable (x 1)
SFF-8088 ↔SFF-8088 (75cm)
❑Using Optional Products (x 1)
❑Package Contents (this manual) (x 1)
❑Disk drive (x 1)
Installed in the controller enclosure or drive enclosure
when purchased with the base unit.
❑Wrist strap (*2) (x 1)
❑Using Optional Products (*2) (x 1)
❑Package Contents (this manual) (*2) (x 1)
❑Disk drives (x 2)
Installed in the controller enclosure or drive enclosure
when purchased with the base unit.
❑Wrist strap (*2) (x 1)
❑Using Optional Products (*2) (x 1)
❑Package Contents (this manual) (*2) (x 1)
❑Disk drives (x 4)
Installed in the controller enclosure or drive enclosure
when purchased with the base unit.
❑Wrist strap (*2) (x 1)
❑Using Optional Products (*2) (x 1)
❑Package Contents (this manual) (*2) (x 1)

❏3.5" One SSD (ETLSS1HAU, ETLSS2HAU)
❏3.5" Two SSDs (ETLSS1MAU, ETLSS2MAU)
❏3.5" Four SSDs (ETLSS1PAU, ETLSS2PAU)
❏AC Outlet Box (AC200V, 1U) (ETLAC2U1U)
❏AC Outlet Box (AC200V, 2U) (ETLAC2U2U)
❏Advanced Copy Feature (ETLL6CPU, ETLL8CPU)
❏miniSAS Cable Kit (ETLCAMS1U)
*1: Confirm that there are no parts missing from the rack mount kit (for base units and drive enclosures).
*2: Not supplied when purchased with the base unit.
❑SSD (x 1)
Installed in the controller enclosure or drive enclosure
when purchased with the base unit.
❑Wrist strap (*2) (x 1)
❑Using Optional Products (*2) (x 1)
❑Package Contents (this manual) (*2) (x 1)
❑SSDs (x 2)
Installed in the controller enclosure or drive enclosure
when purchased with the base unit.
❑Wrist strap (*2) (x 1)
❑Using Optional Products (*2) (x 1)
❑Package Contents (this manual) (*2) (x 1)
❑SSDs (x 4)
Installed in the controller enclosure or drive enclosure
when purchased with the base unit.
❑Wrist strap (*2) (x 1)
❑Using Optional Products (*2) (x 1)
❑Package Contents (this manual) (*2) (x 1)
❑AC outlet box (x 1)
❑Rack mount kit (*3) (x 1 set)
❑AC200V input cables (x 2)
IEC320-C13 ↔NEMA L6-15P (4m)
❑AC output cables (x 4)
IEC320-C13 ↔IEC320-C14 (3m)
❑Release ties (x 4)
❑Using Optional Products (*2) (x 1)
❑Package Contents (this manual) (*2) (x 1)
❑AC outlet box (1U) (x 2) with AC200V input
cables (x 2) (→NEMA L6-20P, 4m) attached
❑Rack mount kit (*4) (x 1 set)
❑AC output cables (x 12)
IEC320-C13 ↔IEC320-C14 (3m)
❑Release ties (x 12)
❑Using Optional Products (*2) (x 1)
❑Package Contents (this manual) (*2) (x 1)
❑License label plate (x 1)
❑Release tie (x 1) ❑Feature activation licenses (x 1) ❑Package Contents (this manual) (*2) (x 1)
❑miniSAS cable (x 1)
SFF-8088 ↔SFF-8088 (3m)
❑Wrist strap (*2) (x 1)
❑Using Optional Products (*2) (x 1)
❑Package Contents (this manual) (*2) (x 1)
❏One Bracket L ❏One Bracket R ❏Eight M5 screws
❏Eight screw holders
With four M4 screws
attached.
With four M4 screws
attached. For use with
square rack pillar holes.

Copyright 2009 FUJITSU LIMITED
This manual uses recycled paper.
*3: Confirm that there are no parts missing from the rack mount kit (for AC outlet box (1U)).
*4: Confirm that there are no parts missing from the rack mount kit (for AC outlet box (2U)).
❏Two brackets
for left and right
❏Two holders (for left and right)
❏Four M6 screws
for attaching the brackets and hold-
ers
❏Four screw holders
for attaching the brackets and
holders
❏Two M3 screws
for attaching the AC outlet box
❏One blank panel (1U)
❏Two black M5 screws
for attaching the blank panel
❏Two rack nuts
for attaching the blank panel
❏Two M5 cage nuts
for attaching the blank panel
❏One blank panel (2U) ❏Twelve M5 screws
for attaching AC outlet box (×8)
and blank panel (×4)
❏Twelve rack nuts
for attaching AC outlet box (×8)
and blank panel (×4)
❏Twelve M5 cage nuts
for attaching AC outlet box (×8)
and blank panel (×4)
Both brackets are
the same shape.
With 8 M3
screws attached.
Both holders are
the same shape.
For use with
square rack pillar holes.
For use with
round rack pillar holes.
For use with
square rack pillar holes.
For use with
round rack pillar holes.
For use with
square rack pillar holes.
ETERNUS DX60/DX80 Disk storage system
Package Contents
P3AM-3062-03EN
Date of issuance: October 2009
Issuance responsibility: FUJITSU LIMITED
Printed in Japan
•The contents of this manual may be updated without notice.
•While the contents of this manual are the product of all due care
and diligence, no responsibility can be accepted for operational
problems arising from any errors or missing information, or other
use of the information contained in this manual.
•Fujitsu assumes no liability for damages to third party copyrights or
other rights arising from the use of any information in this manual.
•Contents of this manual are not to be reproduced without permission
from Fujitsu.
•Manuals with missing or wrongly collated pages will be replaced
free of charge.