Fujitsu HandyDrive-5 User manual

HandyDrive-5 - Operations Manual R.1
HandyDrive-5
Operations Manual
R.1

HandyDrive-5 - Operations Manual R.1
HandyDrive Key Product Features
Capacity : 250/320/400/500GB (Using M250)
Sleek & Slim Design
85mm x 135mm x 15mm
Less than 170g
Power Saving Firmware (M250+Handy)
Backup Software
Security Password Lock Tool
Format & Partition Utility
Bundled Software Supports 11 Languages:
oEnglish
oFrench
oSpanish
oPortuguese
oGerman
oItalian
oRussian
oTraditional-Chinese
oSimplified-Chinese
oKorean
oJapanese
Warranty Period in Americas: 3 years (Asia:3yrs, EMEA:2yrs)
Fujitsu Supported Diagnostics

HandyDrive-5 - Operations Manual R.1
Table of Contents
HandyDrive HDD Installation
HandyDrive Hard Disk Format Tool
Backup Utility Software
Password Lock Tool
HandyDrive Diagnostics
Diagnostic Error Codes

HandyDrive-5 - Operations Manual R.1
HandyDrive Installation Steps
1. Plug the USB Mini-B end of the cable into the HandyDrive, and place the USB Series “A” plug
into the host computer.
2. MS Windows will detect the connection of a “USB Mass Storage Device”, and report that
“USB2.0 HandyDrive500” is ready for use. Depending upon the capacity, you will see the new
drive in the storage device list, e.g. Handy160 (D:)
3. Installation is complete, when the MS Windows Found New Hardware wizard reports that the
drive is ready for use.
Should the need arise to reset the partitions from the factory defaults; a Format & Partition
Utility is included with the bundled software package. See the next section of the manual for
the utility software operating procedure.

HandyDrive-5 - Operations Manual R.1
HandyDrive Hard Disk Format Tool
Purpose
The Hard Disk Format Tool is the software utility for Windows which enables you to reset the
HandyDrive partitions and the format to:
oThe factory default setting
oTo split drive into multiple partitions
oTo delete the partitions
Caution: The data inside the hard disk will be lost if any alteration, deletion or formatting of the
partition is executed. Please take extra care when using this software.
What does [Partition] mean?
It is the part or the area created by dividing the hard disk logically into multiple parts. One
hard disk is used as multiple drives by dividing the hard disk into multiple partitions.
What does [Format] mean?
This is the operation to enable write/read of data to hard disks and floppy disks etc. All the
recorded data are deleted when formatting is executed.
Operating Environments
This software operates under the environments described below.
Supported OS:
oMicrosoft® Windows Vista™ Ultimate
oMicrosoft® Windows Vista™Enterprise
oMicrosoft® Windows Vista™Business
oMicrosoft® Windows Vista™Home Premium
oMicrosoft® Windows Vista™Home Basic
oMicrosoft® Windows® XP Home Edition
oMicrosoft® Windows® XP Professional
oMicrosoft® Windows® 2000 Professional
oMicrosoft® Windows® Millennium Edition
oMicrosoft® Windows® 98 Second Edition
Caution: This software is a 32 bit application. As for this software operating in a 64 bit OS, it is not
guaranteed.
Supported Device:
oFUJITSU HandyDrive only.

HandyDrive-5 - Operations Manual R.1
Precautions and Limitations for Usage
oThis software can be used when only one HandyDrive is connected to the PC.
oIt cannot be used when no HandyDrive is connected, or two or more units are connected.
oClose all the other applications before use.
oDo not start other applications during use.
oThe contents of the disk may be corrupted if shutdown is executed during formatting. Never
execute it.
oThe contents of the disk may be corrupted if this software is closed forcefully during
formatting. Never execute it.
oDo not connect or remove the HandyDrive when using this software.
oLog on with the administrator's account, if you use this software on Windows Vista, Windows
XP or Windows 2000 Professional.
oReconnect the HandyDrive after using this software.
oWhen you reconnect the HandyDrive, execute Safely Remove Hardware in the task tray to
make it removable before you remove the HandyDrive and then reconnect it.
oRefer to the Quick Start Guide for the method to remove it.
oWhen you remove the hardware after using this software, an error message may be displayed
and it will become unremovable.
oIn this case, make sure that other applications are not using it first.
oIf the problem is not solved yet, restart the OS to remove properly.
oMake sure the PC does not enter into a standby or suspend state before using this software.
oDo not execute standby or suspend during use of this software.
oIf it becomes standby or suspend state during use of this software, the contents of the disk
may be corrupted.
oThe process may take a long time depending on the function.
oConnect an AC adapter to the PC to prevent shortage of battery power during the process if
using on a notebook PC.
oThis software can only create a maximum of 8 partitions.

HandyDrive-5 - Operations Manual R.1
Installation
Caution: When the OS is upgraded with the Hard Disk Format Tool, the operation of the Hard Disk
Format Tool is not guaranteed. Please uninstall the Hard Disk Format Tool before upgrading the OS
and re-install latest version of the Hard Disk Format Tool after upgrading the OS.
Please uninstall old version of the Hard Disk Format Tool before installing latest version of the Hard
Disk Format Tool. Refer to section, "Uninstall".
Install this software package using the following procedure below.
1. Log on with the administrator's account, if you are use Windows Vista, Windows XP or
Windows 2000 Professional.
2. Double-click UtySetup.exe to start installation.
a. In Windows Vista, when the User Account Control is valid
b. Click [Allow] when the "User Account Control" dialog box is displayed, and selecting
the [Cancel] or [Allow] is required.
3. Click [Next >] when the computer is ready for installation, and the "Welcome to the
InstallShield Wizard for HandyDrive Format Tool V3.21" dialog box is displayed.
4. Click [Finish] when the installation is over and "InstallShield Wizard Completed" dialog box is
displayed.
Running the Software
Start this software using the following procedure below.
1. Connect only one HandyDrive to the PC.
2. Click the [Start] menu of [Task Bar].
3. Click the [All Programs] menu in case of Windows XP/Vista and, [Programs] in case of
Windows98SE/Me/2000.
4. Click the [Fujitsu HandyDrive] menu.
5. Click the [Hard Disk Format Tool V3.21] menu.
6. Click [Format Tool].
a. In Windows Vista, when the User Account Control is valid, Click [Allow] when the "User
Account Control" dialog box is displayed, and selecting the [Cancel] or [Allow] is
required.
7. Click [Yes], after confirming the contents in the list , when the dialog box "Handling
Precautions" is displayed.

HandyDrive-5 - Operations Manual R.1
After clicking [Yes], the Format Tool Application Dialog will open, as shown below.
Select the operation you wish to execute, by clicking on that button from the Operation Menu.

HandyDrive-5 - Operations Manual R.1
Display of the User's Guide
Display the user's guide for this software package, following the method below.
[Displaying from this software]
Click [Help]-[Users Guide] from the menu bar at the top of the main screen.
[Displaying from the start menu]
1. Click [Start] on the [Task Bar].
2. Click [All Programs] menu in case of Windows XP/Vista, click the [Programs] menu in case
of Windows98SE/Me/2000.
3. Click the [Fujitsu HandyDrive] menu.
4. Click the [Hard Disk Format Tool V3.21] menu.
5. Click [User's Guide].
Uninstall
Uninstall the Hard Disk Format Tool using the following procedure below.
1. Log on with the administrator's account if you use Windows Vista, Windows XP or Windows
2000 Professional.
2. Open [My Computer] and click [Control Panel]. Note: [Control Panel] can also be opened
through [Start]-[Settings]-[Control Panel].
a. In Windows Vista, click [Control Panel] from the Windows [Start] menu.
3. Open [Add or Remove Programs].
a. In Windows Vista, open [Uninstall a program].
4. Select [HandyDrive Format Tool V3.21] and click the [Remove].
a. In Windows Vista, select [HandyDrive Format Tool V3.21] and click the
[Uninstall].
5. Click [Yes] when the "Are you sure you want to remove HandyDrive Format Tool V3.21 from
your computer?" dialog box is displayed.
6. Uninstallation starts.
a. In Windows Vista, when the User Account Control is valid, Click [Allow] when the "User
Account Control" dialog box is displayed, and selecting the [Cancel] or [Allow] is
required.

HandyDrive-5 - Operations Manual R.1
Backup Utility Software
Installation
Install this software package using the following procedure below.
1. Log on with the administrator's account, if you are use Windows Vista, Windows XP or
Windows 2000 Professional.
2. Double-click tih_s_e.exe to start installation.
a. In Windows Vista, when the User Account Control is valid
b. Click [Allow] when the "User Account Control" dialog box is displayed, and selecting
the [Cancel] or [Allow] is required.
3. Click [Install] when the "Acronis® True Image Home" dialog box is displayed.
4. Click [Next >] when the computer is ready for installation, and the "Welcome to the Acronis
True Image Personal HDD Setup" dialog box is displayed.
5. If you accept the software license agreement, Click on “I accept this agreement”, and then
[Next].
6. At the “Serial Number Dialog”, enter your serial number provided, and click [Next].
7. At the “Custom Setup Dialog”, you can [Browse] for your own installation directory, or accept
the default directory, by clicking [Next].
8. At the Select Administration Option Dialog, Choose whether to allow all users to access this
utility, or only the administrator, and Click [Next].
9. After all options are selected, Click [Proceed].
10.At the “Installation Complete” Dialog, Click [Close] to exit the installation. You are done!