Funtin FTH-KBL1 User manual

2
≤0.3m
1~4m
1Product Introduction
CONTACT
Websit : https://www.funtintech.com
Tel : [phone]
eMail: [email protected]
Address :
B201 4F Niulanqian Build Baoan District Shenzhen, China
Zip : 518000
Welcome to follow our facebook:
https://www.facebook.com/funtintech,
any questions can leave a message to tell us,
we will reply you ASAP.
THANK YOU FOR READING :)
Funtin Home natural gas detector is for natural gas, Oil liquefied
petroleum gas detection equipment. If there is gas at home, once
the concentration of the detected gas reaches the dangerous
value, the detector will send out the audible and visual alarm
signal, prompting you to take effective measures quickly to
eliminate the danger and effectively avoid the accidents such as
fire and explosion.
Sensor
The core of the original - sensors, gas-sensing electrodes with
100% pure platinum precious metal manufacturing.
Double alarm
Up to 70 dB of audible alarm, 360 ° ring warning lights.
Design
Radian design is not only simple and elegant, more to improve
the efficiency of intake, so that detectors 7x24 hours to keep
sensitive and stable.
Carefully selected polycarbonate, strict implementation of fire
safety requirements.
Just right of the matte process, the design has long been full of
sense of ether home security products.
Indicator State Description
Power indicator light is on, indicating that the detector is working
normally.
Green light flashes, indicating that the detector is self-test and
preload.
Yellow light flashes , indicating that the detector is in a fault
condition.
Red light flashes, indicating that the detector is alarming.
Instructions
Products Schematic Installation Instructions
Installation Location
the detector and the gas stove should be located in the
same indoor space;
≥1.2m
the detector distance may be 1 to 3 meters away from the
gas leak source is the best.
the detector should be installed in the distance from the
ceiling 30cm height of the wall fixed position.
the standard mounting position
is 30cm from the ceiling. If there
is no power outlet, install it at a
distance of 120cm from the
ground.
Precautions
can not be installed from the gas stove too close to the
place!
can not be installed in the place with too much smoke!
can not be installed in the exhaust fan, doors and windows,
bathrooms and other large airflow or humidity larger place!
3The Key Function Introduction
Self-test function: self-test key for detecting the sound
and light alarm is abnormal.
No alarm state, press the self-test button, the ring
indicator light green, red, yellow flashing, while the
buzzer sounds three times.
If the ring indicator light or buzzer is abnormal, please
repair it in time.
Funtin Home Natural Gas Detector Manual

FTH-KBL1
Natural Gas (methane - CH4)
100g
Semiconductor
59mm * 59mm * 40mm
Natural diffusion
DC 100V - 240V
0-100% LEL
180s ± 10s
7% ± 3% LEL
Visible and Audible alarm
Temperature: -20 to 40
Humidity: ≤ 95% RH (no frost)
70dB
5 years
Model
Applicable Gas
Weight
Overall Dimensions
Sampling Method
Working Voltage
Range
Self-test Time
Alarm Setpoint
Alarm
Working
Environment
Alarm Volume
Service Life
Sensor Type
56
Failure
Phenomenon
The power cord
is not
connected well
Power indicator
has failed
Press the self-test
button without
sound and
light alarm
Circuit failure
No response
to detection
of gas
Pre-boot program
has not ended
Circuit failure
After the
pre-start
procedure,
the detector has
been in the
alarm state
In the environment
there are a large
number of volatile
organic compounds.
Place the
detector in
a clean air
environment
and restart the
self-test
program.
Storage time
is longer
Circuit failur
Please connect
the power
cord well
Please contact
the seller
Please contact
the seller
Wait for the
program
to finish
Please
contact
the seller
Please contact
the seller
Continue to
power aging
The green power
indicator does
not light
7
Main Specifications Common faults and solutions
Failure Analysis Treatment
Program
After-sales policy and warranty policy
THIS PRODUCT SUPPORTS ONE-YEAR FREE REPLACEMENT, BUT IF NON-
NORMAL USE DOES NOT ENJOY THE WARRANTY (FOR EXAMPLE:
LIGHTNING, VOLTAGE INSTABILITY, WATER AND OTHER MAN-MADE) .
4Equipment Maintenance
1. this product after storage and long-distance transport, the first
time in need of electricity aging more than 24 hours in order to
achieve the best performance.
2. start the product self-checking function every 4-6 months.
IN THE CASE OF SAFETY TO ENSURE THE USE OF A KNOWN
CONCENTRATION OF GAS ON THE DETECTOR FOR IMPACT TESTING
TO CONFIRM WHETHER THE DETECTOR WORK.
BE SURE TO TEST IN A SAFE ENVIRONMENT!
3. please often use a soft brush, velvet cleaning equipment,
surface dust and oil, to ensure that its detection hole breathable,
indicating good display. When cleaning, do not use detergents,
bleach and so on.
4. This product is designed for indoor use only, please avoid
contact with rain or moisture, also need to avoid the detector
drop, do not beat, open or change it, otherwise it may lead to
product failure.
5. should not be used near the detector volatile substances, such
as alcohol, hair gel and so on. If this kind of material causes the
false report, please promptly ventilates, causes the detector to
return to the normal examination condition.
6. under normal circumstances, the maximum life of the detector
for 5 years, more than the use of the period must be replaced
with new ones.