Furniture of America CM-BK961 User manual

VERSION # 19-08-14

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING

BUNK BED

Attach dowels (#5) to the side rails (#E),
then align the side rails (#E) to the
headboard/footboards (#A). Secure by using
bolts (#1) to barrel nuts (#6).
Align slats (#I) to the side rails, then
secure by using screws (#4).

Secure the slats (#I) by using screws (#7).
Insert dowels (#9) to the headboard/
footboards.

STEPS 5 and 6 DEPENDS ON WHICH SIDE YOU WANT THE LADDER TO BE.
1) Attach dowels (#5) to side rails (#D)
and guardrails (#G,F), then secure onto
headboard and footboard (#B,C) by
using bolts (#1) to barrel nuts (#6).
2) Attach dowels (#5) to side rails (#D), then secure onto
footboard (#C) by using bolts (#1) to barrel nuts (#6).
3) Align guard rails supports (#H)
to guard rails and side rails, then
secure by using bolts (#3) and
screws (#7).

3) Align guard rails
supports (#H) to guard
rails and side rails, then
secure by using bolts
(#3) and screws (#7).
2) Attach dowels (#5) to side rails (#D), then
secure onto footboard (#C) by using bolts (#1) to
barrel nuts (#6).
1) Attach dowels (#5) to side
rails (#D) and guardrails
(#G,F), then secure onto
headboard and footboard
(#B,C) by using bolts (#1) to
barrel nuts (#6).

Align slats (#I) to the side rails, then secure by using screws (#4).
Secure slats (#I) by using screws (#7).

Place top bunk onto bottom
bunk.
Insert dowels (#5) to ladder stretchers (#L),
then align ladder stretchers (#L) to ladder
rails (#J,K). Secure by using bolts (#2) to
barrel nuts (#6).

Align ladder to bunk bed, then secure by using screws (#8).