Furniture of America HFW-1478C2 User manual

REV.14-12-15
Page 1 of 14
HFW-1478C2

Page 2 of 14

Page 3 of 14

Page 4 of 14

Page 5 of 14
CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS

TV STAND
ASSEMBLY INSTRUCTIONS MODEL #HFW-1478C2
please keep for future reference PARTS LIST
HARDWARE LIST
A1PC
DIMENSIONS :70.8"(W)*15.7"(D)*21.8"(H)
B1PC
Page 6 of 14
A
P
P
Q
Q
D
AA
AA
AA
H
L
B
H1PCG
1PC D1PC
1PC F1PC
E
C
I1PC J1PC K1PC
2PCS
L1PC
M2PCS N1PCO
Q1PC
RST
1PC
V
W1PC
XAA
P
U
BB
2PCS
2PCS 2PCS 3PCS 3PCS
2PCS
2PCS
2PCS 2PCS
4PCS
2PCS
128PCS 222PCS 314PCS 448PCS 54SETS 612SETS 72PCS
82SETS 9 10 3SETS
(12PCS)
11 44PCS2SETS 12 16PCS 13 2PCS 14 4PCS
15 4PCS 16 17 6PCS 18 6PCS14PCS 19 4PCS 20 1PC 21 2PCS
YZ

STEP : 1
Hardware 1 x 4 pcs
Hardware 5 x 2 sets
Hardware 10 x 4 pcs drawer rails
Hardware 11 x 8 pcs
Hardware 12 x 8 pcs
Hardware 16 x 4 pcs
Hardware 17 x 4 pcs
Dowel hole
ASSEMBLY INSTRUCTIONS
Page 7 of 14
Side View
Right Drawer Rail
Front View
Identifying Drawer's Rails (a.k.a. Runners, Glides, Slides or Guides)
An assembly of ONE drawer requires a set of 4 different rails: right panel rail, left panel rail, right
drawer rail and left drawer rail. To identify which rail belongs to which part, please read completely
first before assembling.
To Determine Right/Left Panel Rail: Place the panel rail flat on its back with the roller position on
the left hand side. If there are two holes above the roller and the other end is slightly downward angle
then it is the LEFT PANEL RAIL. If there are two holes below the roller and the other end is slightly
upward angle, then it is the RIGHT PANEL RAIL. The right and left panel rails are mirror image of
each other.If needed, label or separate each rail for easy identification.
To Determine Right/Left Drawer Rail: Place the drawer rail with the round and oval holes resting
flat on the surface with its roller on the right hand side. If the roller is facing the top, then it is the
LEFT DRAWER RAIL and if the roller is facing the bottom, then it is the RIGHT DRAWER RAIL. The
right and left drawer rails are mirror image of each other. If needed, label or separate each rail for
easy identification.
Mounting the Panel Rail: The panel rail is constructed to be mounted flat. Make sure the roller is
position on the front of the panel and the screw holes are aligned with the pre-drilled holes of the
panel.
Mounting the Drawer Rail: The drawer rail is constructed to be mounted on the side of the drawer .
Make sure the roller is position on the SIDE REAR of the drawer and the screw holes are aligned
with the pre-drilled holes on the side of the drawer.

ASSEMBLY INSTRUCTIONS
STEP : 2
STEP : 3
Page 8 of 14
Hardware 1 x 2 pcs
Hardware 10 x 2 pcs drawer rails
Hardware 11 x 4 pcs
Hardware 12 x 4 pcs
Hardware 16 x 2 pcs
Hardware 17 x 2 pcs 16
16
11
Hardware 4 x 36 pcs
Hardware 10 x 6 pcs panel rails
Hardware 11 x 12 pcs
Hardware 16 x 8 pcs
Dowel hole
Side View
Right Drawer Rail
Front View

STEP : 4
ASSEMBLY INSTRUCTIONS
Page 9 of 14
Hardware 12 x 2 pcs

STEP : 7
STEP : 8
ASSEMBLY INSTRUCTIONS
Page 10 of 14
Hardware 1 x 6 pcs
Hardware 3 x 9 pcs
2
BBAA
Hardware 1 x 8 pcs
Hardware 2 x 8 pcs
Hardware 4 x 12 pcs
AA

STEP : 9
ASSEMBLY INSTRUCTIONS
STEP : 10
Page 11 of 14
Hardware 2 x 6 pcs
Hardware 18 x 6 pcs
Hardware 12 x 2 pcs
Hardware 13 x 2 pcs
Hardware 15 x 4 pcs
Hardware 19 x 4 pcs
Hardware 20 x 1 pc
Hardware 21 x 2 pcs
15

STEP : 11
ASSEMBLY INSTRUCTIONS
Page 12 of 14
14
Hardware 5 x 2 sets
Hardware 9 x 2 sets
Hardware 11 x 20 pcs
Hardware 14 x 4 pcs
STEP : 12
Hardware 1 x 8 pcs
Hardware 8 x 2 sets

STEP : 13
ASSEMBLY INSTRUCTIONS
STEP : 14
Page 13 of 14
Hardware 2 x 8 pcs

ASSEMBLY INSTRUCTIONS
STEP : 15
ASSEMBLY IS COMPLETED
Page 14 of 14
Make sure the unit is rested on a flat
surface and does not feel loose or
wobbly. If it does, double check all
bolts/screws are secured and properly
tightened.
Hardware 6 x 12 sets
STEP : 16