Furniture of America Bridgette CM3325PT-5PK User manual

1 / 9
MODEL #
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
CM3325PT-5PK
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
2 - People
(Included)
Recommended
(Included)
Allen Wrench
(Not Included)
Allen Wrench
Philips Screwdriver
VERSION # 20-09-30

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX9

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX9

4 / XXXXXXX9

5 / 9
Table
CM3325PT-5PK
#1 1pc
#A 8pcs #B 8pcs #C 8pcs
Leg
Wrench 12 x 90mm
#D 1pc
#2 4pcs
Table Top
Bolt Ø 5/16" x 2-1/2'' Lock Washer Ø5/16" Flat Washer Ø5/16"
#1
#2

ASSEMBLY INSTRUCTIONS
6 / 9
1
2
Part #1 x1pc
Part #2 x4pcs
Hardware #A x8pcs
Hardware #B x8pcs
Hardware #A x8pcs
#2
#2
#2
#1
#2
#A
#B
#C
#D
Align legs (#2) to the top (#1), then
secure by using bolts (#A) with washers
(#B,C).

7 / 9
Chair
CM3325PT-5PK
#1 1pc x4
Bolt Ø1/4" x 2-1/2''
#B 4pcs x4
#G 1pc x4
Allen Wrench 4 mm
#F 6pcs x4
Screw Ø8 "x45
#2 1pc x4 #3 2pcs x4
Front Leg
(L/R)
#4 2pcs x4
Side stretcher
#5 1pc x4
Front stretcher
#A 4pcs x4
Bolt Ø1/4" x 3'' Bolt Ø1/4" x 1-1/2''
#C 2pcs x4 #D 10pcs x4
Lock Washer Ø1/4 "
#E 10pcs x4
Flat Washer Ø1/4''
#1
#2
#3L
#3R
#4L
#5 #4R
x4
Backrest w/Legs Seat

ASSEMBLY INSTRUCTIONS
8 / 9
2
Part #1 x1pc
Part #2 x1pc
Hardware #C x2pcs
Hardware #D x2pcs
Hardware #E x2pcs
1
#E
#D
#C
#F
#E
#D
#A
#F
#1
#2
#1
#2
Hardware #A x4pcs
Hardware #D x4pcs
Hardware #E x4pcs
x4
x4
Align seat (#2) to the chair back
(#1), then secure by using bolts
(#C) with washers (#D,E).
Secure corner holes to the seat
(#2) to chair back (#1) by using
bolts (#A) with washers (#D,E).

ASSEMBLY INSTRUCTIONS
9 / 9
Please ensure the furniture
rests on even and flat
surface. If the product
wobbles or feels loose,
doule- check all bolts and/or
screws are properly tightened
and secured.
ASSEMBLY
COMPLETED
Keep this handy!
Please retain this
instruction manual and any
order-related information
for future reference
Lift, don't drag!
To avoid damage to
product please always
LIFT the product when
transporting or adjusting
the placement
Hardware #B x4pcs
Part #3 x2pcs
Part #4 x2pcs
Part #5 x1pcs
Hardware #D x4pcs
Hardware #E x4pcs
Hardware #G x6pcs
4
3
#4R
#4L
#3R
#3L
#5
#E
#D
#B
#F
#G
x4
x4
Align legs (#3R/L) with
stretchers (#4R/L,5) to the
chair, then secure by using
bolts (#B) with washers
(#D,E).
Secure stretchers by using screws
(#G).