Furniture of America CM3150T User manual

MODEL #
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
2 - People
(Included)
Allen Wrench
Recommended
Questions?
CM3150T
Phillips
Screwdriver
(Not Included)
Wrench
( Included)
1 / 10
VERSION # 20-05-28

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX10

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX10

4 / XXXXXXX10

DINING TABLE
#1 1pc
Table top Table Leaf
#2 1pc
#A 24pcs
Bolt Ø5/16" x 2"
Up Shelf
#3 2pcs
Table base
#4 2pcs
Support Rail
#5 1pc
#B 24pcs #C 24pcs
Lock washer
Ø5/16"
#E 4pcs
Allen wrench
4 mm
#F 4pcs
Wrench Ø12mm
#6 1pc
Bottom Rail Connected plate
#7 2pcs
#D 1pc
Flat washer
Ø5/16"
#G 1pc
Hex Nut
Ø5/16"
Threaded Stud
Ø5/16"x 3-1/2"
CM3150T
5 /10

Exploded View
#1
#2
#3
#7
#6
#3
#4
#5
#4
6 / 10

Table top
Table Leaf
Up Shelf
Support Rail
Bottom Rail
Connected
plate
#A 24pcs
#B 24pcs
#D 1pc
#C 24pcs
#E 4pcs
#F 4pcs
#G 1pc
#1
#2
#3
#5
#6
#7
#4
CM3510T is packed in 2 cases
Carton Disignation Part Hardware
CM3150T-1
CM3150T-2 Table base
7 / 10

ASSEMBLY INSTRUCTIONS
1
Part #6 x1pc
Hardware #A x4pcs
Part #7 x2pcs
2
Part #4 x2pcs
Part #5 x1pc
Hardware #B x4pcs
Hardware #C x4pcs #A
#B
#C
#D
#7
#6
#F
#G
#5
#4
#4
#E
#A
#B #C
#D
Hardware #A x6pcs
Hardware #B x6pcs
Hardware #C x6pcs
#7
Hardware #E x4pcs
Hardware #F x4pcs
8/10
Align connected plates (#7) to the
bottom rail (#6), then secure by using
bolts (#A) with washers (#B,C).
Attach threaded studs (#E) to the
bases (#4). Align table bases (#4) to
the support and bottom rails (#5,6).
Secure bottom rails (#6) to bases
(#4) by using bolts (#A) with
washers (#B,C). Secure support rail
(#5) to the bases (#4) by using hex
nuts (#F).

ASSEMBLY INSTRUCTIONS
3
Part #3 x2pcs
4
#A
#B
#C
#D
#3
Hardware #A x6pcs
Hardware #B x6pcs
Hardware #C x6pcs
#A
#B
#C
#D
#1
Hardware #A x8pcs
Hardware #B x8pcs
Hardware #C x8pcs
#3
9 / 10
Align up shelves (#3) to the bases, then
secure by using bolts (#A) with washers
(#B,C).
Align table base to the table top (#1), then secure by
using bolts (#A) with washers (#B,C).

ASSEMBLY INSTRUCTIONS
5
6
#2 #1
Part #2 x1pc
10/10
Unlock the table top by turning lever at the
bottom of the table, then extend the table top.
Align table leaf (#2) to the center of the table.
Adjust levelers on the base according to the ground level.