Furniture of America California CM-BK600CH User manual

1. Align the bolt set (#A) to the
two bottom holes along the
upper front and back side rails
(#5,6) and the upper HB/FB (#2)
as shown to the left. Then
secure using the Allen wrench.
2. Insert a long screw bolt (#C)
into the top holes along the
upper HB/FB (#2). Secure
using the Allen wrench (#G).
Align the lower front side rails
(#3,4) to the slots along the
lower HB/FB (#1). Insert a half
nut (#A) into the holes along the
sides of the rails and insert the
bolt into the holes along the legs
of the HB/FB. Once inserted, secure
bolts using the Allen wrench (#G).

Insert a metal dowel (#D)
into the holes along the
top of the lower HB/FB
(#1). Then with the help
of another person,
carefully place the upper
bed onto the lower bed.
Align the ladder (#8) to
the holes along the upper
front side rail (#5) and
the lower front side rail
(#3). Then insert a short
bolt (#B) from within the
rails and secure using the
Allen wrench (#G).

Place the slats (#7) onto the upper
and lower beds. Insert a long screw
(#E) into the ends of each slat, then
secure using a Phillips screwdriver.
Align the ends of the drawer back panel (#12)
to the holes along the sides of the drawer
side panels (#10). Insert 2 short screws (#F)
to the holes along each side of the drawers.
Secure using a Phillips screwdriver.

Slide the drawer bottom
panel (#11) into the ridges
along the side panels.
Place the drawer front panel (#9)
onto the front side of the drawer.
Insert 2 short screws (#F)
to the holes along each side
of the drawers. Secure using
a Phillips screwdriver.

Insert drawers.