Furniture of America Calliope CM7751D&M User manual

1 / 9
MODEL #
CM7751D&M
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
2 - People
EASY
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
DIFFICULT
VERSION # 20-08-19

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX9

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX9

4/ XXXXXXX9

5 / 9
CM7751D&M
#1 1pc #2 1pc
Dresser Mirror
#A 4pcs #B 8pcs
Bolt Ø1/4" x 1-3/8" Lock Washer Ø1/4"
#C 12pcs #D 12pcs
Flat Washer Ø1/4"
Mirror Support Rail
#3 2pcs
Support Leg
55x35x35mm
Right leg
#5 1pc
Bolt Ø1/4" x 1-3/4"
Anti Tip Kit
#F 1 Set
#E 2pcs
Allen Wrench M4
Left leg
#4 1pc
#6 1pc
(Ø1/4")
DRESSER &MIRROR
HARDWARE

#2
#3
40mm
20mm
45mm399mm
84mm399mm
45mm
972mm
1060
#1
6 / 9
Carton Disignation Part Hardware
CM7751M
CM7751D
#5
#6
#2
#3
#1
#4
#B x 8pcs
#C x 8pcs
#D x 8pcs
#E x 1pc
Dresser
Left leg
Right leg
Support Leg
Mirror
Mirror Support Rail
#A x 4pcs
#C x 4pcs
#D x 4pcs
#E x 1pc
#F x 1pc
#4
#5
#6
CM7751D&M is packed in 2 cases

Part #1 x1pc
Part #4 x1pc
Part #5 x1pc
#5
#4
Part #6 x1pc
#6
7 / 9
ASSEMBLY INSTRUCTIONS
1
2
#A
#C
#D
#E
#1
Hardware #A x4pcs
Hardware #C x4pcs
Hardware #D x4pcs
Leg Box
Remove legs from the inside compartment of the
dresser.
Prepare 4 bolts assembly by inserting
lock washer (#C), then flat washer (#D)
onto bolts (#A). Align legs (#4.#5) to
the holes of the dresser (#1). Secure by
using bolts (#A).
Attach support leg to the middle
bottom hole of the dresser (#1).
Adjust leveler of the support
leg according to ground level.

Part #2 x1pc
Part #3 x2pcs
Hardware #B x8pcs #2
#3
Hardware #C x8pcs
Hardware #D x8pcs
8 / 9
ASSEMBLY INSTRUCTIONS
3
4
#D
#C
#B
#E
Hardware #F x1Set
WALL
#F
Prepare 8 bolts assembly by inserting lock washer
(#C), then flat washer (#D) onto bolts (#B). Align
mirror support (#3) to the holes of the mirror (#2)
and dresser (#1). Secure by using bolts (#A).

9 / 9