Furniture of America CM-BK930-T/T User manual

1. Insert the barrel nuts (#F)
into the holes along the
sides of the lower side
rails (#10). Align the
openings to the holes.
2. Insert the long
bolts (#B) into
the holes along
the sides of the
lower headboard/
footboard (#3).
Secure using the
Allen wrench (#M).
1. Insert the dowels
(#A) into the holes
along the ends of
the long guard
rails (#5), insert
the other ends
into (#1) and (#2).
2. Insert the barrel nuts (#F) into the
holes along the sides of the long
guard rails (#5) and the upper
rails (#4,7). Make sure to align
the holes to the openings.
3. Insert the long bolts (#B) into
the holes along the upper head-
board and footboard (#1,2).
Secure using the Allen wrench.

Insert the metal pins (#H) into the holes along the
top of the lower headboard and footboard (#3),
then carefully place the top bed onto those pins.
Repeat process in step #2.

1. Peel the foam sticks
(#L) onto the hooks
(#K), then place the
hooks onto the top
ends of the ladder
side rails (#12,14).
2. Insert 2 wood screws
(#J) into each hook,
secure using a
screwdriver.
3. Insert the dowels (#A) into each end of
the steps (#13), then insert a bolt (#M)
into each hole along the rails and
secure using the Allen wrench (#M).
Align the hooks, then insert
a screw (#J) into each hole
Secure using a screwdriver.

Place the slat sets (#11) on to the
top bed and lower bed. Insert a
screw (#I) into each hole and
secure using a screwdriver.