Furniture of America Golva CM7295Q User manual

1) Prepare 12 bolts assembly by inserting lock washer (#B),
then flat washer (#C) onto bolts (#A). Align HB support (#3)
to the holes of the HB legs (#2R/L). Secure by using bolts
(#A).
2) Align HB legs (#2R/L) to the holes of the
headboard (#1). Secure by using bolts (#A).
Attach threaded studs (#E) to the holes of the headboard (#1) and footboard (#4). Align the side rails (#5) to
the threaded studs (#E). Secure by using hex nut (#F) on threaded studs (#E).

Align and attach support legs (#7) to each slats (#6). Adjust floor
protectors of the support legs (#7) according to ground level.
Align slats (#6) to the side rails (#5), then secure by using screws (#H).