Furniture of America CM3733-RPT User manual

CM3733-RPT
(Included)
Spanner
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
ASSEMBLY RATING
EASY DIFFICULT
1 / 12
(Not Included)
Philips
Screwdriver
TOOLS REQUIRED
MODEL #
GIVE US A CALL: 1-888-980-5122
MON – FRI 8:30AM – 5:30PM (PST)
Questions?
2 - People
Recommended
VERSION # 21-01-28

2 / 12
Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING

PRE ASSEMBLY
INTRODUCTION
3 / 12
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.

4 / XXXXXXX12

ROUND COUNTER HEIGHT TABLE
CM3733-RPT
#1 1pc
Table Top
#A 8pcs
Hex Comb
5/16'' x 2 1/2''
#B 8pcs
Lock Washer
5/16''
#C 8pcs
Flat Washer
5/16''
#D 1pc
Spanner
#E 8pcs
Csk Screw
M3.5 x 16mm
#2 4pcs
Table Leg
#3 1pc
Table Base
#4 1pc
Partition Panel
#5 1pc
Wine Rack
Bottom Panel
#6 2pcs
Wine Rack
Side Panel
#7 1pc
Wine Rack
Center Panel
#8 3pcs
Wine Rack
Divider
#9 1pc
Shelf Panel
#10 1pc
Lazy Susan
#F 4pcs
L - Bracket
#G 4pcs
Wood Dowel
Ø8 x 30mm
5 / XXXXXXX12

6 / XXXXXXX12
x 3
x 2

ASSEMBLY INSTRUCTIONS
1
2
Part x4pcs
#2
Hardware x4pcs
#E
Hardware x4pcs
#F
#4
#G
Follow marking.
#E
#2
#F
Part x1pc
#4
Hardware x4pcs
#G
7 / 12
x4
F
E
Align bracket (#F) to the legs (#2),
then secure by using screws (#E).
Attach dowels (#G) to partition panel
(#4).

Part x1pc
Hardware x4pcs
Hardware x4pcs
Hardware x4pcs
Push the leg followed the
arrow while tighten the bolt.
Holes
#4
#3
#2
#B
#C
#A
3
4
#3
#A
#B
#C
ASSEMBLY INSTRUCTIONS
8 / 12
Align legs (#2) to the table base
(#3), then secure by using bolts
(#A) with washers (#B,C).
Align partition panel (#4) to the
base.

ASSEMBLY INSTRUCTIONS
5
6
Holes
Part x2pcs
#6
Part x1pc
Hardware x4pcs
#5
#E
#E
#5
#8
#7
#6
Part x1pc
#7
Part x3pcs
#8
9 / 12
Align wine rack bottom panel
(#5) to the unit.
Align wine rack panels (#6,7,8)
together to the unit.

ASSEMBLY INSTRUCTIONS
7
8
Part x1pc
#9
#9
#A
#B
#C
Hardware x4pcs
Hardware x4pcs
Hardware x4pcs
#A
#B
#C
Part x1pc
#1
#1
10 / 12
Align shelf (#9) to unit.
Align top (#1) to the unit, then secure
by using bolts (#A) with washers
(#B,C).