Furniture of America CM-BK967C-2D User manual

VERSION # 20-01-14
1 / 13
CM-BK967C-2D
MODEL #
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
DIFFICULT
Phillips
Screwdriver
EASY
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
2 - People
(Not Included)
(Included)
Allen Wrench
Recommended

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ 13

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ X13

4/ 13

CHEST
#3 1pc
CM-BK967C-2D
#5 1pc
#1 1pc #4 1pc
#8 2pcs
#6 1pc
5 / 13
Top Panel
Right Side Panel
Between Panel Left Side Panel
Back Panel Shelf Panel
#13 2pcs
Drawer Left Panel
#2 1pc
Bottom Panel
#7 1pc
Back Panel
#9 2pcs #10 2pcs #12 2pcs
#11 2pcs
Drawer Right Panel
Drawer Front Panel Drawer Bottom Panel
Drawer Back Panel

6 / 13
#A 12pcs #B 8pcs #C 1pc #D 12pcs
#E 4pcs #F 12pcs #G 20pcs #H 16pcs
#10
#13
#11
#12
Bolt Ø1/4"x2-3/8" Allen Key 4mm
Shelf Pin Barel Nut Ø1/4"
Screw
#5/32x22mm Dowel#8x30mm Screw #3.5x15mm Screw
#4x25mm
#2
#1
#5
#3
#6
#4
#I 2pcs
Holder
#8
#7
#9
#K 4pcs
Dowel #6x30mm

7 / 13
1
2
#3
#1
#2
#F
#F
#F
#1 x1pc
Part #2 x1pc
Part #3 x1pc
Hardware #F x12pcs
Part
#13
#10
#K
Hardware #K x2pcs
Part #13 x1pc
Part #10 x1pc
ASSEMBLY INSTRUCTIONS
x 2
#K
Insert dowels (#F).
Insert dowels (#K).

8 / 13
ASSEMBLY INSTRUCTIONS
#3
#1
#A #4 #2
#1
#C #D
#D
Hardware #A x4pcs
Hardware #D x4pcs
Part #4 x1pc
Hardware #A x4pcs
Hardware #D x4pcs
3
4
#C
#A
#D
#2
Align panels (#1,2,3) together, then
secure by using bolts (#A) onto
barrel nuts (#D).
Finished side
Align panel (#4) to panels (#1,2), then
secure by using bolts (#A) onto barrel
nuts (#D).

#6 #G
#7
9 / 13
ASSEMBLY INSTRUCTIONS
#2
#1
#5
Part #5 x1pc
Hardware #A x4pcs
Hardware #D x4pcs
Part #7 x1pc
Hardware #G x20pcs
Part #6 x1pc
5
6
#A #C
#D
Align panel (#5) to panels (#1,2),
then secure by using bolts (#A)
onto barrel nuts (#D).
Align back panels (#6,7) to the
unfinished side of the unit, then secure
by using screws (#G).

#H
#13
#10
#11
10 / 13
ASSEMBLY INSTRUCTIONS
Hardware #H x4pcs
Part #11 x1pc
7
8x 2
#13
#10
#12
Part #12 x1pc
x 2
Part #10 x1pc
Part #13 x1pc
Align drawer panels (#10,11,13) together, then
secure by using screws (#H).
Slide bottom drawer panel (#12) through the thin lined
gaps of the panels (#10,13).