Furniture of America CM-DK931 User manual

1 / 12
MODEL #
CM-DK931
Questions?
GIVE US A CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PT)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION # 21-05-24
2 - People
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific Time and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PT)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed are all acccounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / 12

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent to prevent
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
scratches and damages.
3 / 12

4 / 12

#1 1pc #2 2pcs #3 1pc
#4 8pcs #5 1pc #6 4pcs
VANITY SET
CM-DK931
5 / 12
Table Top Mirror support rail Mirror
Table Leg Stool Seat Stool Leg
#A 8pcs
Bolt 5/16'' x 2-1/2''
#C 8pcs
#B 8pcs
Bolt 1/4'' x 1-3/8'' Bolt 1/4'' x 2''

6 / 12
#E 24pcs
#D 16pcs
Lock washer 1/4'' Washer 5/16'' x 19mm
#F 1pc
Allen Wrench 4mm
Anti-tip Skit
#G 1set
#1
#3
#2
#2
#4
#5
#6

CM-DK931 is packed in 2 cases
7 / 12
Carton Disignation Part Hardware
CM-DK931-1
#1
CM-DK931-2 Mirror
#2
#A x 8pcs
#B x 8pcs
#C x 8pcs
#D x 16pcs
#E x 24pcs
#F x 1pc
#4
#5
#6
#3
Table Top
Mirror support
rail(2pcs)
Table Leg
(8pcs)
Stool Seat
Stool Leg
(4pcs)
#G x 1set

ASSEMBLY INSTRUCTIONS
1
2
8 / 12
Part #1 x1pc
Part #4 x8pcs
Hardware #A x8pcs
Hardware #E x8pcs
Part #2 x2pcs
#1
#4
#4 #E
#A
#F
Hardware #B x4pcs
Hardware #D x4pcs
Hardware #E x4pcs #2
#2
#1
#B #D
#E
#F
Align table legs (#4) to the table top (#1),
then secure by using bolts (#A) with
washers (#E).
Align mirror supports (#2) to the
table top (#1), then secure by using
bolts (#B) with washers (#D,E).

ASSEMBLY INSTRUCTIONS
3
4
9 / 12
Part #3 x1pc
Hardware #B x4pcs
Hardware #D x4pcs
Hardware #E x4pcs
#3
#B #D
#E
#F
Align mirror (#3) to the mirror supports,
then secure by using bolts (#B) with
washers (#D,E).
Reattach knobs to the outer side of the
drawers.

ASSEMBLY INSTRUCTIONS
5
10 / 12
Part #5 x1pc
Hardware #C x8pcs
Hardware #D x8pcs
Hardware #E x8pcs
6
#5
#6
#6 #6
#6
#D
#E
#C
#F
Part #6 x4pcs
OFF
ON
WALL
Plug power cords to the electrical outlet.
USB
Align seat legs (#6) to the seat (#5),
then secure by using bolts (#C) with
washers (#D,E).