Furniture of America CM3604SC-2PK User manual

Page 1 of 5
ASSEMBLY INSTRUCTIONS

Page 2 of 5

Page 3 of 5

Page 4 of 5
Prepare 3 bolts assembly by inserting lock washer (#D), then flat washer (#E)
onto bolts (#A). Align chair seat (#2) to the holes of the chair back (#1).
Secure middle 3 holes of the chair seat (#2) by using bolts (#A).
Prepare 4 bolts assembly by inserting lock washer (#D), then flat washer (#E)
onto bolts (#C). Secure corner holes of the chair seat (#2) by using bolts (#C).

1) Prepare 4 bolts assembly by inserting lock washer (#D), then flat washer (#E)
onto bolts (#B). Align front legs (#3R/L) to the holes of the chair seat (#2). Secure
by using bolts (#B), but do not fully tighten.
2) Align and attach stretchers (#4,5) to the gaps of the legs. Secure by using screws
(#F), then fully tighten bolts (#B) on the front legs.
ASSEMBLY COMPLETED