Furniture of America CM3557AC-2PK User manual

EASY
The Assembly Rating is a 5-point system that
shows the degree of effort needed in
assembling a specific product (with 1 being
easy and 5 being difficult). For some
products, two persons are recommended.
Allen Wrench (Included)
Assembly Instructions
Tools Required for Assembly:
Rev.14-08-21
Page 1 of 6
DIFFICULT
ASSEMBLY RATING
Phillips Screwdriver (Not Included)
CM3557AC-2PK

Thank you for your purchase!
We hope you will enjoy your new product for many years to come. Our commitment
to providing quality products does not simply end when a purchase is made. We
stand behind our products and will provide any support needed in order for you to
fully enjoy your purchase. Your satisfaction is the greatest recognition we could
have.
Because we value your trust in our company, we will do our best to meet your
service expectations. Should you have any assembly related questions, parts
replacement requests, comments or suggestions, please feel free to contact us any
time. To help expedite the service, please have the assembly instructions available,
along with your order receipt.
[email protected]
www.foagroup.com
Toll-Free 1-888-980-5122 or 1-626-363-9311
1-626-270-4451
Monday to Friday 8:30 a.m. to 5:30 p.m. (PST)
https://twitter.com/foagroup
http://www.pinterest.com/foagroup/
http://instagram.com/foagroup#
https://www.youtube.com/user/FurnitureOfAmerica
Page 2 of 6

Page 3 of 6

Parts List Hardware List
#1 x 1 pc x 2
Backrest w/Legs
#2 x 1 pc x 2
Seat
#3 x 1 pc x 2
Left Armrest
#A x 4 pcs x 2
Bolt 5/16”x3”
#B x 4 pcs x 2
Bolt 5/16”x2”
Before you begin, please read Page 3
of “Assembly and Care Advice”.
And remember, do not tighten until
each step is completed or instructed.
#C x 3 pcs x 2
Bolt 5/16”x1-3/4”
MD
#D x 11 pcs x 2
Lock Washer
#4 x 1 pc x 2
Right Armrest
Page 4 of 6
Note: The above parts and hardware are shown for a complete
assembly of ONE chair. However, the actual parts and hardware
(with an exception of the Allen wrench) in the box will be twice the
quantities listed to include the assembly of the second chair.
#E x 11 pcs x 2
Flat Washer
#F x 1 pc
Allen Wrench
#5 x 2 pcs x 2
Front Leg
#G x 2 pcs x 2
Screw 1-1/4”
X 2

I. Place the backrest with legs (#1)
on a protected surface.Align the
seat (#2) with the pre-drilled
holes of the backrest with legs
(#1).
II. Prepare a bolt assembly by
inserting FIRST the lock washer
(#D) onto the bolt (#C) and then
the flat washer (#E) onto the
SAME bolt (#C), in that order.
III. Insert the bolt assembly through
the pre-drilled hole on the center
of the seat (#2) and secure that
bolt using theAllen wrench (#F)
to lock it with the backrest with
legs (#1).
Turn right (clockwise) to tighten
Turn right (clockwise) to tighten
Page 5 of 6
#C x 1 pc
#D x 1 pc
#E x 1 pc
#A x 4 pcs
#D x 4 pcs
#E x 4 pcs
I. Prepare 4 bolt assemblies by
inserting FIRST the lock
washer (#D) onto the bolt
(#A) and then the flat washer
(#E) onto the SAME bolt
(#A), in that order.
II. Insert the bolt assemblies
through the pre-drilled holes
in the corners of the seat (#2)
and secure those bolts using
the Allen wrench (#F) to lock
them with the backrest with
legs (#1).

Turn right (clockwise) to tighten
Page 6 of 6
#B x 4 pcs
#D x 4 pcs
#E x 4 pcs
I. Align the 2 front legs (#3) with the pre-
drilled holes on the corners of the seat
(#2).
II. Prepare 4 bolt assemblies by inserting
FIRST the lock washer (#D) onto the
bolt (#B) and then the flat washer (#E)
onto the SAME bolt (#B), in that order.
III. Insert the bolt assemblies through the
pre-drilled holes in the corners of the
seat (#2) and secure those bolts using
the Allen wrench (#F) to lock them with
the two front legs (#3).
ASSEMBLE EVERYTHING EXACTLY THE SAME FOR THE SECOND CHAIR
I. Align the left armrest (#3) with the pre-
drilled holes of the backrest with legs
(#1) AND the seat (#2).
II. Prepare a bolt assembly by inserting
FIRST the lock washer (#D) onto the bolt
(#C) and then the flat washer (#E) onto
the SAME bolt (#C), in that order.
III. Insert that bolt assembly through the seat
(#2) and secure that bolt using the Allen
wrench (#F) to lock it with the seat (#2).
IV. Secure the other end of the left armrest
(#3) with a screw (#G) through the
backrest with legs (#1) using a Phillips
screwdriver to lock it with the left armrest
(#4).
V. Repeat the process above to assemble
the right armrest (#4) onto the backrest
with legs (#1) AND the seat (#2).
VI. Make sure the chair is rested on a flat
surface and does not feel loose or wobbly.
If it does, double check that the bolts are
secured and properly tightened.
#C x 2 pcs
#D x 2 pcs
#E x 2 pcs
#G x 2 pcs
#G
Note: Right and left are
determined by facing the front of
the chair in its upright position. #1