Furniture of America CM3018PT User manual

1 / 9
MODEL #
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
2 - People
Recommended
CM3018PT
(Included)
Wrench
(Included)
Allen Wrench
VERSION # 20-12-18

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ 9

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ 9

4 / 9

TABLE
5 / 9
#1 1pc #2 1pc
#A 4pcs
Bolt Ø5/16" x 2-1/2"
Flat Washer Ø5/16"
#C 4pcs #D 12pc
Lock Washer Ø5/16"
#B 4pcs
Table Top Lower Panel
#3 8pcs
Support Rail
#4 1pc
Post
#H 8pcs
Hex Nut Ø5/16"
#K 1pc
Wrench
#5 1pc
Base
#I 4pcs
Leveler Ø1/4"
#J 16pcs
Wood Dowel
Ø10x1-1/8"
#L 1pc
Allen Wrench
4mm
CM3018PT
Bolt Ø1/4" x 2-1/2" Bolt Ø5/16" x 1-1/4" Bolt Ø1/4" x 1-3/8"
#E 8pcs #F 8pcs

Exploded View
6 / 9
#1
#4
#3
#5

ASSEMBLY INSTRUCTIONS
1
7 / 9
Hardware #J x2pcs
2
Hardware #E x4pcs
Hardware #F x4pcs
Hardware #H x4pcs
Insert dowels (#J) to the holes of the support rails (#3).
Align support rails (#3) to the holes of the post (#4), then secure
by using hex nut (#H) with washers (#E,F).
#J
#3 x8
Part #3 x1pc
Part #4 x1pc
#3
#4
#F #E #H
#K

ASSEMBLY INSTRUCTIONS
3
8 / 9
Hardware #A x4pcs
Hardware #B x4pcs
Hardware #I x4pcs
4
1) Align base (#5) to the post (#4) and support rails (#3),
then secure base (#5) to post (#4) with bolts (#A).
2) Secure base (#5) to support
rails (#3) by using bolts (#B). 3) Attach levelers (#I) to the holes of the base (#5).
Adjust levelers (#I) according to ground level.
Hardware #E x4pcs
Hardware #F x4pcs
Hardware #H x4pcs Align support rails (#3) to the holes of the post (#4), then
secure by using hex nut (#H) with washers (#E,F).
Part #5 x1pc #L
#I
#B
#5
#3
#4
#3
#4
#J #F #E #H
#K
#L
#A

ASSEMBLY INSTRUCTIONS
5
9 / 9
Hardware #C x4pcs
Hardware #D x4pcs
Hardware #D x8pcs
1) Align lower panel (#2) to the holes of
the post (#4) and support rails (#3), then
secure lower panel (#2) to post (#4) by
using bolts (#C).
2) Secure lower panel (#2) to the support
rails (#3) by using bolts (#D).
Align lower panel (#2) to the holes of the
table top (#1), then secure by using bolts
(#D).
#L
#D
#4
#1
#L
#D
#2
#3
Part #2 x1pc
Part #1 x1pc
#L
#C
6