Furniture of America CM3733PC-2PK User manual

CM3733PC-2PK
2 - People
Recommended
VERSION # 19- -12-30
CM3733PC-2PK
1 / 8

2 / 8
Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING

PRE ASSEMBLY
INTRODUCTION
3 / 8
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.

4 / XXXXXXX8

COUNTER HEIGHT CHAIR
CM3733PC-2PK
#1 1pc
Chair Frame Back
#A 4pcs
JCBC SCREW
M6 x 80MM
#B 4pcs
Lock Washer
1/4''
#C 2pcs
Flat Washer
1/4''
#D 10pcs
Allen Key
M4
#E 10pcs
Csk Screw
M4 x 32mm
#2 1pc
Box Seat
#3 2pcs
Front Leg (Left & Right)
#4 2pcs
Side Stretcher
(Left & Right)
#5 1pc
#F 1pc #G 6pcs
Front Stretcher
JCBC SCREW
M6 x 60MM
JCBC SCREW
M6 x 35MM
5 / XXXXXXX8

ASSEMBLY INSTRUCTIONS
1
2
Part
Part x1pc
Hardware x2pcs
Hardware x2pcs
Hardware x2pcs
x1pc
#1
#2
#C
#D
#E
#1
#2
#D
#E
#A
#2
#1
#D
#E
#C
Hardware x4pcs
Hardware x4pcs
Hardware x4pcs
#A
#D
#E
6 / XXXXXXX8
Secure corner holes of the seat (#2) to chair
back (#1) by using bolts (#A) with washers
(#D,E).
Align seat (#2) to the chair back
(#1), then secure by using bolts
(#C) with washers (#D,E).

ASSEMBLY INSTRUCTIONS
3
4
Part x2pcs
#4
MARKING
L-LEFT
MARKING
R-RIGHT
#4
#4
#4
#1
Part x2pcs
Hardware x4pcs
Hardware x4pcs
Hardware x4pcs
#3
#B
#D
#E
Part x1pc
#5
#E#B
#D
#5 #3
MARKING
L-LEFT
MARKING
R-RIGHT
7 / XXXXXXX8
Align stretchers (#4R/L) to the holes of the chair
back (#1).
Align front legs (#3R/L) with
stretcher (#5) to the seat and side
stretchers, then secure by using
bolts (#B) with washer (#D,E).

ASSEMBLY INSTRUCTIONS
5
6
Hardware x6pcs
#G
#G
8 / XXXXXXX8
Secure stretchers by using screws
(#G).