Furniture of America Athy CM-DK6848 User manual

1 / 14
MODEL #
CM-DK6848
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION # 21-03-17
2 - People
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ 14

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ X14

4 / XXXXX14

VANITY SET
CM-DK6848
5 / 14
#1 1pc #2 8pcs
Riser
#4 4pcs
Cabinet body Leg
#5 1pc
Backplane
Bottom plate
#3 2pcs
#6 1pc
Panel
#7 2pcs
Drawer Top
#8 1pc
In the mirror
#9 2pcs
Side mirror
#10 2pcs
Mirror supprt rail
#11 1pc #12 4pcs
Seat Leg

6 / 14
#A 13pcs #B 5pcs #C 8pcs
Bolt Ø1/4" x 2" Barrel Nut Ø1/4"
#D 16pcs #E 16pcs #F 1pc
Lock Washer Ø1/4" Flat Washer Ø5/16"
#G 2pcs #H 4pcs #I 1pc
Connect lron Wood Screw #3 x 1/2" Glue
Bolt Ø1/4" x 1-3/8"
Allen Wrench 4mm
#J 1set
Anti-tip Skit

7 / 14
Exploded View
#1
#2 #2
#2
#2
#3
#3
#4
#4
#4
#4
#5
#6
#7
#7
#8
#9
#9
#10
#10
#11
#12
#12
#12
#12
#2 #2
#2
#2

ASSEMBLY INSTRUCTIONS
1
2
8 / 14
Part #3 x2pcs
Part #4 x4pcs
Hardware #I x1pc
#1
#2
Part #1 x1pc
Part #2 x8pcs
#4
#4
#3
#3
#1
#3
#I
Attach legs (#2) to the bottom holes of the cabinet body (#1).
Align and attach the risers (#4) to the holes of the bottom plate (#3).
Pour glue (#I) into the hold (#3)
before installing the wood dowel

ASSEMBLY INSTRUCTIONS
3
4
9 / 14
Part #6 x1pc
Part #5 x1pc
Hardware #A x2pcs
Hardware #B x2pcs
Hardware #A x3pcs
Hardware #B x3pcs
Hardware #I x1pc
#1
#5
#B
#F
#A
#6
#I
#6
#B
#A
#F
Insert barrel nuts (#B) to the holes of the bottom plate (#3). Make sure the barrel nut (#B) holes are facing the
same direction as the hole on the back side of bottom plate (#3). Align backplane (#5) to the holes of the
bottom plate (#3), then secure by attaching bolts (#A) to barrel nuts (#B).
Pour glue (#I) into the hold (#6)
before installing the wood dowel
Align the panel (#6) to the holes and wood dowels of the
rest of the cabinet. Insert barrel nuts (#B) to the holes of
the backplane (#5) and make sure the barrel nut hole is
facing upwards. Secure by attaching bolts (#A) to the
barrel nuts (#B).

ASSEMBLY INSTRUCTIONS
5
6
10 / 14
Part #8 x1pc
Part #10 x2pcs
Hardware #C x4pcs
Hardware #D x4pcs
#10
#10
#C
#D
#E
#F
Hardware #E x4pcs
#8
#C
#D
#E
#F
#H
#G
Hardware #C x4pcs
Hardware #D x4pcs
Hardware #E x4pcs
Hardware #G x2pcs
Hardware #H x4pcs
Prepare 4 bolts assembly by inserting lock washer (#D), then flat washer (#E) onto bolts (#C). Align mirror
connecting rods (#10) to the holes located in the back side of the cabinet body (#1). Secure with bolts (#C).
Prepare 4 bolts assembly by inserting lock washer (#D), then flat
washer (#E) onto bolts (#C). Align mirror (#8) to the holes of the
mirror connecting rod (#10), then secure with bolts (#C).
Align iron plate (#G) to the back of the desk.
Secure with screws (#H).