Furniture of America CM3781SC-2PK User manual

1 / 6
MODEL #
CM3781SC-2PK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
# 19-08-26
Furniture of America
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT

2 / 6
Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING

3 / 6

4 / 6

CHAIR
CM3781SC-2PK
5 / 6
HARDWARE
PARTS
#1 1pc
Chair Body
#A 4pcs
Bolt M6 x 60mm
#B 4pcs
Lock Washer M6
#C 8pcs
#D 1pc
Allen Wrench
Csk Screw M4 x 28mm
#2 1pc
Leg (Top)
#3 1pc
Leg (Bottom)
#4 1pc
Corner Block
Front
#5 1pc
Corner Block
Back
X2
#E 4pcs
Anti Slip Pad

ASSEMBLY INSTRUCTIONS
1
2
Part #1 x 1 pc
Part #2 x 1 pc
Hardware #A x 4 pcs
Hardware #B x 4 pcs
6 / 6
#3
Part #3 x 1 pc
#2
#A
#B
#D
#1
Hole Marking
#5
#4
#C
#3
#2
Attention: Do not tighten the screw before all screw are in place
#E
Hardware #C x 8 pcs
Part #4 x 1 pc
Part #5 x 1 pc
Hardware #E x 4 pcs
Align legs (#2,3) to the seat
(#1), then secure by using bolts
(#A) with washers (#B).
Align corner blocks (#4,5) to the legs,
then secure by using screws (#C).
Attach anti-slip pads (#E) to each legs.