Furniture of America Anabelle CM7677-F User manual

Rev: 16-12-13
For more information contact our team: [email protected]

1) Remove headboard legs (#5) from the back
compartment of the headboard (#1).
2) Prepare 4 bolts assembly by inserting lock washer
(#G), then flat washer (#F) onto bolts (#C). Align
headboard legs (#5) to the holes of the headboard (#1),
then secure with bolts (#C).
Secure top holes of the headboard (#1) and wings (#4)
together with bolts (#C) that contains lock washer (#G)
and flat washer (#F).
Align HB leg support (#10)
in-between HB legs (#5), then
secure with bolts (#B) that
contains lock washer (#G)
and flat washer (#E).
Secure bottom holes of the HB
legs (#5) and wings (#4)
together with bolts (#D) that
contains lock washer (#G) and
flat washer (#F).
Attach footboard legs (#6) onto the
footboard (#2).

Align side rails (#3) to the holes of the headboard (#1) and footboard (#2), then secure
bolts (#B) that contains lock washer (#G) and flat washer (#E).
Prepare 8 bolts assembly by inserting lock washer (#G), then flat washer (#E) onto bolts
(#C). Align support legs (#9) to the holes of the support rails (#8), then secure with bolts
(#C) and hex hut (#H).

Prepare 8 bolts assembly by inserting lock washer (#G), then flat washer (#E) onto bolts (#B,C).
Align support rails (#8) to the holes of the footboard (#2) and headboard leg support (#10).
Secure support
rails (#8) to the
headboard leg
support (#10) with
bolts (#C).
Secure support rails (#8) to the
footboard (#2) with bolts (#B).
Attach the slats with connectors,
then place the connectors with
slats onto the holes of the side rails
and support rail.

Rev: 16-12-13
For more information contact our team: [email protected]

1) Remove headboard legs (#5) from the back
compartment of the headboard (#1).
2) Prepare 4 bolts assembly by inserting lock washer
(#G), then flat washer (#F) onto bolts (#C). Align
headboard legs (#5) to the holes of the headboard (#1),
then secure with bolts (#C).
Attach footboard legs (#6) onto the
footboard (#2).
Secure top holes of the headboard (#1) and wings (#4)
together with bolts (#C) that contains lock washer (#G)
and flat washer (#F).
Align HB leg support (#10)
in-between HB legs (#5), then
secure with bolts (#B) that
contains lock washer (#G)
and flat washer (#E).
Secure bottom holes of the HB
legs (#5) and wings (#4)
together with bolts (#D) that
contains lock washer (#G) and
flat washer (#F).