Furniture of America CM5011-PCR User manual

Rev: 17-11-20
For more information contact our team: [email protected]

Prepare 2 bolts assembly by inserting washer (#E) onto bolts
(#B). Align top panel (#4) to the holes of the back frame (#2).
Secure by using bolts (#B).

Prepare 14 bolts assembly by inserting washer (#D) onto
bolts (#A). Align side frames (#3) to the holes of the back
frame (#2). Secure by using bolts (#A).
Prepare 6 bolts assembly by inserting washer (#D)
onto bolts (#A). Align bottom shelf (#6) to the holes
of the frames (#2,3). Secure by using bolts (#A).

1) Prepare 4 bolts assembly by inserting washer (#D) onto
bolts (#A). Align bottom shelf (#5) to the holes of the frames
(#2,3). Secure by using bolts (#A).
2) Prepare 2 bolts assembly by inserting washer (#E) onto bolts
(#B). Secure bottom shelf (#5) by using bolts (#B).
Align front (#1) to the holes of the whole frame.
Secure top holes by using bolts (#B) with
washer (#D).
Align front (#1) to the
holes of the whole frame.
Secure side holes by using
bolts (#A) with washer
(#D).

Align handle (#9) to the upper
large door, then secure by using
bolts (#A) with washer (#D).
Align handle (#9) to the lower
small door, then secure by using
bolts (#C) with washer (#D).
Secure outer bottom holes by using bolts (#B) with washer (#E).
Secure inner bottom holes
by using bolts (#A) with
washer (#D).

Align and place shelves (#7)
into the cabinet.
Prepare 16 bolts assembly by inserting washer (#E)
onto bolts (#B). Align legs (#8) to the holes of the
cabinet. Secure by using bolts (#B).

Align bracket (#I) to the hole on the top of the cabinet.
Secure by using screws (#G).
Anti-Tip Prevention
Align the bracket (#I) to the estimated height
of the cabinet onto the wall. Secure by using
screws (#H).

Adjust leveler according to ground level.
Align cabinet
brackets (#I) to each
other, then secure
with plastic strap.