Furniture of America CM3825-PC-2PK User manual

EASY
The Assembly Rating is a 5-point system that
shows the degree of effort needed in
assembling a specific product (with 1 being
easy and 5 being difficult). For some
products, two persons are recommended.
Assembly Instructions
Tools Required for Assembly
Rev.14-12-05
Page 1 of 3
DIFFICULT
ASSEMBLY RATING
CM3825-PC-2PK
Allen Wrench (Included)

Page 2 of 3

Parts List
#1 x 1 pc x 2
Seat
#2 x 1 pc x 2
Leg Stand
#A x 2 pcs x 2
Bolt 1/4”x1/2”
Before you begin, please read Page 2
of “Assembly and Care Advice”.
And remember, do not tighten until
each step is completed or instructed.
MD
Page 3 of 3
#B x 1 pc
Allen Wrench
I. Insert the seat (#1) into the leg stand (#2). Then insert 2 bolts (#A) through the leg stand (#2)
using the Allen wrench (#B) to lock them with the seat (#1).
II. Make sure the chair is rested on a flat surface and does not feel loose or wobbly. If it does, double
check that the bolts/screws are secured and properly tightened.
ASSEMBLE EVERYTHING EXACTLY THE SAME FOR THE SECOND CHAIR
Note: The above parts and hardware are shown for a complete assembly of ONE chair. However, the
actual parts and hardware (with an exception of the Allen wrench) in the box will be twice the
quantities listed to include the assembly of the second chair.
#A x 2 pcs