Furniture of America CM3984PC-2PK User manual

Rev: 15-04-13

I. Place the backrest with legs on a protected surface.
II. Align the seat (#2) to the pre-drilled holes on the back
rest with legs (#1).
III. Prepare 2 bolt assemblies by FIRST inserting the lock
washer (#D) onto the bolt (#C) then the flat washer (#E)
onto that SAME bolt (#C), in that order. Secure using the
Allen wrench (#F).
I. Prepare 4 bolt assemblies by FIRST inserting the
lock washer (#D) onto the bolt (#A) then the flat
washer (#E) onto that SAME bolt (#A), in that order.
II. Insert into the pre-drilled holes located on the back
corners of the seat (#2) and secure using the Allen
wrench (#F).

I. Align the left leg (#3) and right leg (#4) to the pre-drilled holes on the front corners of the seat (#2). Make sure
to insert the left leg support (#6), right leg support (#7), and the front leg support (#5) as you install the legs.
II. Prepare 4 bolt assemblies by FIRST inserting the lock washer (#D) onto the bolt (#B) then the flat washer (#E)
onto that SAME bolt (#B). Insert bolts into the seat and secure using the Allen wrench (#F).
Insert screws (#G) at a diagonal into the pre-drilled holes
on the support legs and secure using a Phillips screwdriver.
ASSEMBLY IS COMPLETED