Furniture of America CM5011-PCL User manual

Rev: 17-11-20
For more information contact our team: [email protected]

Prepare 2 bolts assembly by inserting washer (#E)
onto bolts (#B). Align top panel (#4) to the holes of
the back frame (#2). Secure by using bolts (#B).

Prepare 14 bolts assembly by inserting washer
(#D) onto bolts (#A). Align side frames (#3) to
the holes of the back frame (#2). Secure by using
bolts (#A).
Prepare 6 bolts assembly by inserting washer
(#D) onto bolts (#A). Align bottom shelf (#6)
to the holes of the frames (#2,3). Secure by
using bolts (#A).

1) Prepare 4 bolts assembly by inserting washer (#D) onto bolts
(#A). Align bottom shelf (#5) to the holes of the frames (#2,3).
Secure by using bolts (#A).
2) Prepare 2 bolts assembly by inserting washer (#E) onto bolts
(#B). Secure bottom shelf (#5) by using bolts (#B).
Align front (#1) to the
holes of the whole
frame. Secure side
holes by using bolts
(#A) with washer (#D).
Align front (#1) to the
holes of the whole frame.
Secure top holes by using
bolts (#B) with washer
(#D).

Align handle (#9) to the upper
large door, then secure by using
bolts (#A) with washer (#D).
Align handle (#9) to the lower
small door, then secure by using
bolts (#C) with washer (#D).
Secure outer bottom holes by using
bolts (#B) with washer (#E).
Secure inner bottom holes by using
bolts (#A) with washer (#D).

Prepare 16 bolts assembly by inserting washer
(#E) onto bolts (#B). Align legs (#8) to the
holes of the cabinet. Secure by using bolts (#B).
Align and place shelves (#7)
into the cabinet.

Align bracket (#I) to the hole on
the top of the cabinet. Secure by
using screws (#G).
Anti-Top Prevention
Align the bracket (#I) to the estimated
height of the cabinet onto the wall.
Secure by using screws (#H).