Furniture of America CM3886PC-2PK User manual

The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
ASSEMBLY RATING
EASY DIFFICULT
1 / 7
TOOLS REQUIRED
MODEL #
GIVE US A CALL: 1-888-980-5122
MON – FRI 8:30AM – 5:30PM (PST)
Questions?
2 - People
Recommended
VERSION # 20-11-09
CM3886PC-2PK

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / 7

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3 / 7

4 / 7

CHAIR
CM3866PC-2PK
Back Seat Frame Front Leg(L&R)
Allen Wrench Screw #8 x 1-3/4" Lock Washer Ø5/16"
Bolt Ø5/16" x 2" Bolt Ø5/16" x 3-1/2"
Front Stretcher Left Stretcher Right Stretcher
Flat Washer Ø5/16"x22mm
Bolt Ø5/16" x 2-1/4" 10*35MM
5 / 7
x 2 x 2 x 2
x 2 x 2 x 2
x 2 x 2 x 2 x 2
x 2 x 2 x 2 x 2
x 2

1
2
Part
Part
Hardware
Hardware
Hardware
Part
Part
Hardware
Hardware
Hardware
Hardware
Hardware
Hardware
Hardware
6 / 7
#3L #3R
#4
#2
#H
#D
#E
#C
#A
#1
#2
#F
#G
#F
#C
#D
#C
#D
#D
#C
#D
#A
Align front legs (#3R/L) to stretcher (#4)
and seat (#2), then secure front legs
(#3R/L) to seat (#2) by using bolts (#E)
with washers (#C,D). Insert dowel (#H)
onto the hole on the seat (#2).
Align char back (#1) to the seat (#2),
then secure by using the following
bolts and washers as shown in the
diagram below.

3
4
Part
Hardware
Part
7 / 7
#B
#5
#1
#6
#3R
#3L
Align stretchers (#5,6) to the legs, then
secure by using screws (#B).