Furniture of America CM6911-CH User manual

1 / 7
MODEL #
CM6911-CH
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
VERSION # 19-08-23
2 - Persons
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
Furniture of America

2 / 7
Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING

PRE ASSEMBLY
INTRODUCTION
3 / 7
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.

4 / 7

CHAIR
CM6911-CH
#1 1pc
Arm Left Arm Right
#2 1pc #3 1pc
Front Rail
5 / 7
#4 1pc
Back Deck
#5 1pc
Back Rest
Cushion
Cushion Seat
#6 1pc #7 1pc
Seat Deck
#A 2pcs
Jcbc Screw
M6x50MM
#B 4pcs
Jcbc Screw
M6x70MM
#C 6pcs
Lock Washer
1/4''
#D 2pcs
Bend Washer
15x25x2MM
#E 2pcs
Barrel Nut
M6x13MM
#F 1pc
Allen Key
M4
#G 6pcs
Wood Dowel
Ø10x35MM
#H 4pcs
Csk Screw
M4x32MM
#I 4pcs
Wood Button
Ø14.5x9MM
#J 4pcs
L - Bracket
#K 8pcs
ChipBoard Screw
M4x12MM
#8 1pc
Square Pillow

ASSEMBLY INSTRUCTIONS
1
2
Part #1 x1pc
6 / 7
2x
4x
Part #3 x1pc
Part #4 x1pc
Hardware #G x6pcs
#1
#3
#4
2x
2x
2x
#G
Part #2 x1pc
Hardware #A x2pcs
From Inside
#D #A
#C
#E
#B
#C
#2
#C
#B
Hardware #B x4pcs
Hardware #C x6pcs
Hardware #D x2pcs
Hardware #E x2pcs
Ensure that the rail support on the front rail (#3) is as shown in the diagram.
Insert dowels (#G) to back
desk (#4) and front rail (#3),
then align them both
to left arm (#1).
Align the right arm to the back
desk (#4) and front rail (#3),
then secure arms (#1,2) by
following the diagram on the
requird hardware pieces to use.

ASSEMBLY INSTRUCTIONS
3
4
7 / 7
4x
Part #5 x1pc
Hardware #I x4pcs
Part #7 x1pc
Hardware #H x4pcs
#7
#H
Part #6 x1pc
4x
#I
#5
#6
4x
#J
#K
Hardware #J x4pcs
Hardware #K x8pcs
Part #8 x1pc
#8
4x
#J #K
Secure arms to back deck by aligning L brackets
(#K) and securing with screws (#K).
Align seat decks (#7) to frame, then secure by using screw (H).
Attach caps (#I) to bolt holes.