Furniture of America CM7059Q User manual

MODEL #
CM7059Q
Questions?
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
3 - People
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
1 / 10
GIVE US A CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PT)
VERSION # 21-05-21

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific Time and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PT)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed are all acccounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / 10

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent to prevent
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3 / 10
scratches and damages.

4 / XXXXXXX10

Screw Ø4 x 30mm
Headboard Panel Footboard Panel Bed Rail Support Rail
Center Rail
Leg Support Slats (13pcs) Drawer
Screw Ø4 x 15mm
Dust Board
U Shaped Lock Screw Ø4 x 20mm
BED
CM7059Q
#1 1pc #2 1pc #3 2pcs
#A 22pcs #B 24pcs #D 12pcs
#5 4pcs #6 1pc #7 1 Set #8 6pcs #9 2pcs
#C 6pcs
5 / 10
Drawer
#4 2pcs

CM7059Q is packed in 2 cases
Carton Disignation Part Hardware
Headboard
Footboard
Support Rail
Dust Board
CM7059Q-HB&FB&DR
#A 22pcs
CM7059Q-R13
Drawer
Bed Rail
#B 24pcs
#C 6pcs
#D 12pcs
Leg Support
Center Rail
Slats
#1
#2
#8
#9
#3
#4
#5
#6
#7
6 / 10

#1
#3
#2
#3
1
2
Part #1 x1pc
Part #3 x2pcs
Part #4 x2pcs
Hardware #A x6pcs
ASSEMBLY INSTRUCTIONS
Part #2 x1pc
7 / 10
Part x1pc
Hook each end of the bed rails (#3) onto
the slots along the headboard panel (#1).
Place the support rails (#4，#10 ) onto the slots along
the bed rails (#3), then insert a screw (#A) into
each hole. Secure using a screwdriver.

#6
#5
leveler
#8
#D
#C
3
4
Part #8 x6pcs
Hardware #A x2pcs
Hardware #C x6pcs
Hardware #D x12pcs
Part #5 x4pcs
Part #6 x1pc
ASSEMBLY INSTRUCTIONS
8 / 10
1) Align and straighten support rails (#4).
2) Place U shaped lock (#C) to the back rail, then
secure with screws (#D).
3) Align the footboard
drawer rails straight,
then secure with
screws (#A).
4) Place U shaped
lock (#C) to the back
of the rail, then
secure with screws
(#D).
Insert the threaded end of the support legs into the holes
along the center rail (#6), then turn right to tighten.
Adjust according to
the ground level.

#A
#7
#A
5
6
ASSEMBLY INSTRUCTIONS
Hardware #A x 2pcs
Part #7 x 1Set
Hardware #A x 12pcs
9 / 10
Place the center rail (#6)
onto the center slots along
the headboard and foot-
board. Insert a screw (#A)
into each end and secure
using a screwdriver.
Place the slats (#7)
onto the rails, then
insert a screw (#A)
into each hole. Secure
using a screwdriver.

#B
#9
7
8
ASSEMBLY INSTRUCTIONS
Part #9 x 2pcs
Hardware #B x 24pcs
10 / 10
Place the dust boards
(#9) onto the bottom
end of the slats, then
insert a screw (#B) into
each hole. Secure
using a screwdriver.