Furniture of America CM6987-RLV User manual

EASY
The Assembly Rating is a 5-point system that
shows the degree of effort needed in
assembling a specific product (with 1 being
easy and 5 being difficult). For some
products, two persons are recommended.
Assembly Instructions
No Tools Required for Assembly
Rev.14-12-12
Page 1 of 5
DIFFICULT
ASSEMBLY RATING
2 PERSONS RECOMMENDED
CM6987-RLV/WP/CH/LLT

#4 x 1 pc
Console Backrest
Part List
#1 x 1 pc
Left Loveseat
#3 x 1 pc
Left Backrest B
#7 x 1 pc
Chair Seat
Page 2 of 5
#9 x 1 pc
Right Loveseat
#6 x 1 pc
Wedge w/Power Cord
#10 x 1 pc
Center Backrest
#2 x 1 pc
Left Backrest A
#5 x 1 pc
Left Side Cushion
#8 x 1 pc
Chair Backrest
#11 x 1 pc
Right Backrest B #12 x 1 pc
Right Side Cushion
Due to the size and/or weight of this product, it is
highly recommended that the assembly should
be done near the area of its intended location.
Make sure you have enough space to move
around during the assembly.ALWAYS have at
least two people to help with transporting and
assembling the product to avoid any potential
injury and/or damage.
MD
Note: Right and left are determined by facing
the front of the sofa in its upright position.

Page 3 of 5
Assemble the left backrestA (#2), the left backrest B (#3) and the
console backrest (#4) onto the left loveseat (#1) by aligning the
brackets of the backrests with the brackets of the left loveseat (#1).
Slide the brackets together until locked. Make sure all parts are firmly
secured.
Assemble the left side cushion (#5) onto the left backrestA (#2) by
aligning the brackets of the left side cushion (#5) with the brackets of
the left backrestA (#2). Slide the brackets together until locked.
Make sure all parts are firmly secured.

Page 4 of 5
Assemble the center backrest (#10) and the right backrest B (#11)
onto the right loveseat (#9) by aligning the brackets of the backrests
with the brackets of the right loveseat (#9). Slide the brackets together
until locked. Make sure all parts are firmly secured.
Assemble the chair backrest (#8) onto the chair seat (#7) by
aligning the brackets of the chair backrest (#8) with the brackets of
the chair seat (#7). Slide the brackets together until locked. Make
sure all parts are firmly secured.

Page 5 of 5
ASSEMBLY IS COMPLETED
Assemble the right side cushion (#12) onto the right backrest B
(#11) by aligning the brackets of the right side cushion (#12) with
the brackets of the right backrest B. Slide the brackets together
until locked. Make sure all parts are firmly secured.