Furniture of America CM7170Q-F User manual

1) Prepare 8 bolts assembly by inserting
lock washer (#B), then flat washer (#C)
onto bolts (#A). Align cross bar (#3) to
the holes of the HB legs (#2R/L), then
secure by using bolts (#A).
2) Align HB legs (#2R/L) to the holes of the
headboard (#1). Secure by using bolts (#A).
Align and attach bun foot (#7) to the holes of the footboard (#4).

Align and attach support legs (#8) to each slats (#6). Adjust
the adjustable foot on the support legs (#8) according to
ground level.
Align and hook side rails (#5) to the latch of the
headboard (#1) and footboard (#4). Make sure it is
firmly in place.

Align slats (#6) to the side rails (#5),
then secure by using screws (#D).

1) Prepare 8 bolts assembly by inserting
lock washer (#B), then flat washer (#C)
onto bolts (#A). Align cross bar (#3) to the
holes of the HB legs (#2R/L), then secure
by using bolts (#A).
2) Align HB legs (#2R/L) to the holes of
the headboard (#1). Secure by using bolts
(#A).
Align and attach bun foot (#7) to the holes
of the footboard (#4).

Align and attach support legs (#8) to each slats (#6).
Adjust the adjustable foot on the support legs (#8)
according to ground level.
Align and hook side rails (#5) to the latch of the headboard (#1) and
footboard (#4). Make sure it is firmly in place.

Align slats (#6) to the side rails (#5),
then secure by using screws (#D).

2) Align HB legs (#2R/L) to the holes of
the headboard (#1). Secure by using
bolts (#A).
1) Prepare 8 bolts assembly by inserting
lock washer (#B), then flat washer (#C)
onto bolts (#A). Align cross bar (#3) to the
holes of the HB legs (#2R/L), then secure
by using bolts (#A).
Align and attach bun foot (#7) to the holes of the
footboard (#4).

Align and hook side rails (#5) to the latch of the
headboard (#1) and footboard (#4). Make sure it is
firmly in place.
Align slats (#6) to the side rails (#5), then
secure by using screws (#D).