Furniture of America CM-BK939TQ User manual

Align (#9) to (#1) and (#2), then
insert a bolt (#F) into each end
and secure using the Allen wrench.
Align the top of (#10) to (#12)
and the bottom to (#9), insert
a bolt (#D) into each end and
secure using the Allen wrench.
Align the sides of (#10) to
(#1), insert 2 bolts (#B) and
secure using the Allen wrench.
Align each end of (#8) to (#1) and (#2). Insert 2
bolts (#G) into the spacers (#E), then insert into
each end and secure using the Allen wrench (#H).
#2
#2
#1
#1
Rear
Front
Insert 2 bolts (#G) with a spacer (#E) into the
bottom holes. Secure using the Allen wrench.
Align (#3) and (#4)
to the top of (#1) and
(#2). Insert a bolt (#F)
to the top holes.
Align (#12) to (#1) and (#2), then
insert 2 bolts (#A) into each side
and secure using the Allen wrench.

Align the slats according
to the image on the
left, and insert a bolt
(#B) into each pre-drilled
hole. Secure using the
Allen wrench (#H).
Align each end of
the support bar
(#11) to (#9), then
insert a bolt (#D)
into each end and
secure using the
Allen wrench (#H). Insert 2 bolts (#C) into
the center holes along
the support bar (#11)
and secure using the
Allen wrench (#H).

Align the slat support legs (#14)
to the holes along the center
of the bottom bed, then insert
the bolts (#C) from the top and
secure using the Allen wrench (#H).
ASSEMBLY IS COMPLETED
Make sure all parts are firmly secured.