Furniture of America CM7650DK-Q User manual

16-07-28

#1 x 1pc
Before you begin, please read Page 2
of "Assembly and Care Advice".
And remember, do not tighten until
each step is completed or instructed.
Headboard
Page 3 of 5
#2 x 1pc
Footboard
#3 x 2pcs
#4 x 4pcs
Side Rail
#A x 8 pcs
Screw: #4 x 1-1/4"
Slat
Parts List
Hardware List
#5 x 4pcs Ø5/16"
Leg Support 30x30x245mm

Insert the hooks on the ends of the side rails (#3) into the slots along the
headboard (#1) and footboard (#2). Make sure they are firmly secured.
Insert the threaded ends of the slat support
legs (#5) into the pre-drilled holes along the
sides of the slats (#4). Turn right to tighten.

Align the ends of the slats (#4) to the pre-drilled
holes located on the inner sides of the side rails
(#3). Insert a screw (#A) into each end and secure
using a Phillips screwdriver.
Make sure all parts are firmly secured.

16-07-28

#1 x 1pc
Before you begin, please read Page 2
of "Assembly and Care Advice".
And remember, do not tighten until
each step is completed or instructed.
Headboard
Page 3 of 5
#2 x 1pc
Footboard
#3 x 2pcs
#4 x 4pcs
Side Rail
#A x 8 pcs
Screw: #4 x 1-1/4"
Slat
Parts List
Hardware List
#5 x 8pcs Ø5/16"
Leg Support 30x30x245mm

Insert the hooks on the ends of the side rails (#3) into the slots along the
headboard (#1) and footboard (#2). Make sure they are firmly secured.
Insert the threaded ends of the slat support
legs (#5) into the pre-drilled holes along the
sides of the slats (#4). Turn right to tighten.

Align the ends of the slats (#4) to the pre-drilled
holes located on the inner sides of the side rails
(#3). Insert a screw (#A) into each end and secure
using a Phillips screwdriver.
Make sure all parts are firmly secured.